Supero SUPERSERVER 6015W-NT Bedienungsanleitung

SUPERSERVER 6015W-UR

UPERSERVER 6015W-U

SUPERSERVER 6015W-NTR

SUPERSERVER 6015W-NT

SUPER ®

USER’S MANUAL

1.0a

Unless you request and receive written permission from SUPER MICRO COMPUTER, you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Manual Revision 1.0a

Release Date: April 23, 2008

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

SUPER MICRO COMPUTER reserves the right to make changes to the product described in this

manual at any time and without notice. This product, including software, if any, and documenta-

tion may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any

medium or machine without prior written consent.

IN NO EVENT WILL SUPER MICRO COMPUTER BE LIABLE FOR DIRECT, INDIRECT, SPECIAL,

INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE

OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO SHALL NOT HAVE

LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE

PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING

OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for

all claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It pro-

vides information for the installation and use of the SuperServer 6015W-UR/6015W-

U/6015W-NTR/6015W-NT. Installation and maintenance should be performed by

experienced technicians only.

The SuperServer 6015W-UR/6015W-U/6015W-NTR/6015W-NT is a high-end

server based on the SC815TQ-R650U/SC815TQ-560U 1U rackmount chassis

and the Super X7DWU, a dual processor serverboard that supports Intel®Xeon®

5400/5300LV/5200/5100LV series processors at a Front Side (System) Bus speed

of 1600/1333/1066 MHz and up to 64 GB of ECC FBD DDR2-800/667 SDRAM.

Manual Organization

Chapter 1: Introduction

The ﬁrst chapter provides a checklist of the main components included with the

server system and describes the main features of the X7DWU serverboard and

the SC815TQ-R650U/SC815TQ-560U chassis, which comprise the SuperServer

6015W-UR/6015W-U/6015W-NTR/6015W-NT.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer 6015W-UR/

6015W-U/6015W-NTR/6015W-NT into a rack and check out the server conﬁguration

prior to powering up the system. If your server was ordered without processor and

memory components, this chapter will refer you to the appropriate sections of the

manual for their installation.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and

information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

SUPERSERVER 6015W-UR/6015W-U/6015W-NTR/6015W-NT User's Manual

Chapter 4: System Safety

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 6015W-UR/6015W-U/6015W-NTR/6015W-NT.

Chapter 5: Advanced Serverboard Setup

Chapter 5 provides detailed information on the X7DWU serverboard, including the

locations and functions of connections, headers and jumpers. Refer to this chapter

when adding or removing processors or main memory and when reconﬁguring the

serverboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC815TQ-R650U/SC815TQ-

560U server chassis. You should follow the procedures given in this chapter when

installing, removing or reconﬁguring SATA or peripheral drives and when replacing

system power supply modules and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed informa-

tion on running the CMOS Setup Utility.

Appendix A: BIOS POST Messages

Appendix B: BIOS POST Codes

Appendix C: System Speciﬁcations

Preface

Notes

SUPERSERVER 6015W-UR/6015W-U/6015W-NTR/6015W-NT User's Manual

Table of Contents

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Serverboard Features ..................................................................................... 1-2

Processors ...................................................................................................... 1-2

Memory ........................................................................................................... 1-2

UIO (6015W-UR/6015W-U)............................................................................. 1-2

Serial ATA........................................................................................................ 1-2

Onboard Controllers/Ports .............................................................................. 1-2

ATI Graphics Controller................................................................................... 1-3

Other Features ................................................................................................ 1-3

1-3 Server Chassis Features ................................................................................ 1-3

System Power ................................................................................................. 1-3

SATA Subsystem............................................................................................. 1-3

PCI Expansion Slots ....................................................................................... 1-3

Front Control Panel......................................................................................... 1-4

I/O Backplane.................................................................................................. 1-4

Cooling System ............................................................................................... 1-4

1-4 Contacting Supermicro.................................................................................... 1-6

Chapter 2 Server Installation

2-1 Overview ......................................................................................................... 2-1

2-2 Unpacking the System .................................................................................... 2-1

2-3 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-2

Rack Precautions ............................................................................................ 2-2

Server Precautions.......................................................................................... 2-2

Rack Mounting Considerations ....................................................................... 2-3

Ambient Operating Temperature ................................................................ 2-3

Reduced Airﬂow ......................................................................................... 2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-3

2-4 Installing the System into a Rack ................................................................... 2-4

Identifying the Sections of the Rack Rails...................................................... 2-4

Installing the Inner Rails ................................................................................. 2-4

Installing the Outer Rails................................................................................. 2-5

Installing the Server into the Rack.................................................................. 2-6

vii

Table of Contents

Installing the Server into a Telco Rack ........................................................... 2-7

2-5 Checking the Serverboard Setup.................................................................... 2-8

2-6 Checking the Drive Bay Setup........................................................................ 2-9

Chapter 3 System Interface

3-1 Overview ......................................................................................................... 3-1

3-2 Control Panel Buttons ..................................................................................... 3-1

UID .................................................................................................................. 3-1

Reset............................................................................................................... 3-1

Power .............................................................................................................. 3-2

3-3 Control Panel LEDs ........................................................................................ 3-2

Universal Information LED .............................................................................. 3-2

NIC2 ................................................................................................................ 3-3

NIC1 ................................................................................................................ 3-3

HDD................................................................................................................. 3-3

Power .............................................................................................................. 3-3

3-4 SATA Drive Carrier LEDs ................................................................................ 3-4

Chapter 4 System Safety

4-1 Electrical Safety Precautions .......................................................................... 4-1

4-2 General Safety Precautions ............................................................................ 4-2

4-3 ESD Precautions............................................................................................. 4-3

4-4 Operating Precautions .................................................................................... 4-4

Chapter 5 Advanced Serverboard Setup

5-1 Handling the Serverboard ............................................................................... 5-1

Precautions ..................................................................................................... 5-1

Unpacking ....................................................................................................... 5-1

5-2 Processor and Heatsink Installation ............................................................... 5-2

5-3 Connecting Cables.......................................................................................... 5-5

Connecting Data Cables ................................................................................. 5-5

Connecting Power Cables .............................................................................. 5-5

Connecting the Control Panel......................................................................... 5-5

5-4 I/O Ports .......................................................................................................... 5-6

5-5 Installing Memory ............................................................................................ 5-7

5-6 Adding PCI Cards ........................................................................................... 5-9

5-7 Serverboard Details ...................................................................................... 5-10

X7DWU Quick Reference ..............................................................................5-11

5-8 Connector Deﬁnitions ................................................................................... 5-12

5-9 Jumper Settings ............................................................................................ 5-18

5-10 Onboard Indicators........................................................................................ 5-21

viii

SUPERSERVER 6015W-UR/6015W-U/6015W-NTR/6015W-NT User's Manual

5-11 Floppy, IDE and SATA Drive Connections .................................................... 5-22

5-12 Installing Drivers............................................................................................ 5-24

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices.................................................................................. 6-1

Precautions ..................................................................................................... 6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 System Fans ................................................................................................... 6-3

System Fan Failure......................................................................................... 6-3

6-4 Drive Bay Installation/Removal ....................................................................... 6-4

Removing the Front Bezel .............................................................................. 6-4

Accessing the Drive Bays ............................................................................... 6-5

SATA Drive Installation.................................................................................... 6-6

DVD-ROM and Floppy Drive Installation ........................................................ 6-8

6-5 Power Supply .................................................................................................. 6-9

6015W-UR/6015W-NTR.................................................................................. 6-9

Power Supply Failure ................................................................................. 6-9

6015W-U/6015W-NT ..................................................................................... 6-10

Power Supply Failure ............................................................................... 6-10

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

7-2 Running Setup ................................................................................................ 7-2

7-3 Main BIOS Setup ............................................................................................ 7-2

7-4 Advanced Setup.............................................................................................. 7-7

7-5 Security ......................................................................................................... 7-22

7-6 Boot............................................................................................................... 7-24

7-7 Exit ................................................................................................................ 7-25

Appendix A BIOS POST Messages

Appendix B BIOS POST Codes

Appendix C System Speciﬁcations

Chapter 1

Introduction

1-1 Overview

The SuperServer 6015W-UR/6015W-U/6015W-NTR/6015W-NT is a high-end serv-

er comprised of two main subsystems: the SC815TQ-R650U (6015W-UR/6015W-

NTR)/SC815TQ-560U (6015W-U/6015W-NT) 1U server chassis and the X7DWU

dual processor serverboard. Please refer to our web site for information on operating

systems that have been certiﬁed for use with the system (www.supermicro.com).

In addition to the serverboard and chassis, various hardware components have been

included with the 6015W-UR/6015W-U/6015W-NTR/6015W-NT, as listed below:

 One (1) slim DVD-ROM drive [DVM-PNSC-824(B/V)]

 Four (4) sets of 4-cm counter-rotating fans (FAN-0086L)

 One (1) DVD cable (CBL-0139L)

 Two (2) passive CPU heatsinks (SNK-P0017)

 Riser Cards: (see Section 5-6 for details)

One (1) RSC-R1UU-E8R+ for PCI-X card

One (1) RSC-R1UU-UE8 for PCI-E card (6015W-UR/6015W-U only)

One (1) RSC-R1UU-2E8 for two PCI-E cards (6015W-NTR/6015W-NT only)

 SATA Accessories

One (1) SATA backplane (BPN-SAS-815TQ)

One (1) SATA iPASS cable (CBL-0188L) (6015W-UR/6015W-U only)

Four (4) SAS drive carriers (MCP-220-00001-01)

One (1) SATA cable (CBL-0190L) (6015W-NTR/6015W-NT only)

One (1) SGPIO cable (CBL-0157) (6015W-NTR/6015W-NT only)

 One (1) rackmount kit (CSE-PT51L)

 One (1) CD containing drivers and utilities

 SuperServer 6015W-UR/6015W-U/6015W-NTR/6015W-NT User's Manual

Note: a "V" at the end of a server name indicates the chassis is silver and "B"

indicates black..

Chapter 1: Introduction

1-1

1-2

SUPERSERVER 6015W-UR/6015W-U/6015W-NTR/6015W-NT User's Manual

1-2 Serverboard Features

At the heart of the SuperServer 6015W-UR/6015W-U/6015W-NTR/6015W-NT lies

the X7DWU, a dual processor serverboard based on Intel's 5400 chipset. Below

are the main features of the X7DWU (see Figure 1-1 for a block diagram of the

chipset).

Processors

The X7DWU supports single or dual Intel Xeon LGA-771 5400/5300LV/5200/5100LV

series processors at a FSB speed of 1600/1333/1066 MHz. Please refer to the

serverboard description pages on our web site for a complete listing of supported

processors.

Memory

The X7DWU has eight 240-pin DIMM sockets that can support up to 64 GB of

ECC FBD (Fully Buffered DIMM) DDR2-800, DDR2-667 or DDR2-533 SDRAM.

The memory is an interleaved conﬁguration, which requires modules of the same

size and speed to be installed in pairs. Please refer to Chapter 5 for memory speed

jumper settings.

UIO (6015W-UR/6015W-U)

The X7DWU is a specially-designed serverboard that features Supermicro's UIO

(Universal I/O) technology. UIO serverboards have a PCI-Express x8 connector

that can support any one of several types of UIO card types to add SAS ports,

additional LAN ports, etc. to the serverboard. This allows the user to tailor the

serverboard to their own needs. Note: the 6015W-UR/6015W-U does not come

with a UIO card installed.

Serial ATA

An on-chip (ESB2) SATA controller is integrated into the X7DWU to provide a six-

port, 3 Gb/sec Serial ATA subsystem, which is RAID 0, 1 and 10 supported.The

SATA drives are hot-swappable units. Note: The operating system you use must

have RAID support to enable the hot-swap capability and RAID function of the

Serial ATA drives.

Onboard Controllers/Ports

One ﬂoppy drive controller and one onboard ATA/100 controller are provided to

support up to two IDE hard drives or ATAPI devices. The color-coded I/O ports

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Supero Server Handbücher

Supero

Supero SuperServer 5017R-MF Bedienungsanleitung

Supero

Supero SUPERSERVER 6015B-3 Bedienungsanleitung

Supero

Supero SUPERSERVER Bedienungsanleitung

Supero

Supero SuperServer 6024H-TR Bedienungsanleitung

Supero

Supero SuperServer 2027R-N3RF4+ Bedienungsanleitung

Supero

Supero SUPERSERVER 1027R-73DBRF Bedienungsanleitung

Supero

Supero SuperServer 7042S-i Bedienungsanleitung

Supero

Supero SUPERSERVER 5016T-MTFB Bedienungsanleitung

Supero

Supero MicroCloud 5038ML-H12TRF Bedienungsanleitung

Supero

Supero SUPERSERVER 6016XT-TF Bedienungsanleitung

Supero

Supero SUPERSERVER 7045B-8R+ Bedienungsanleitung

Supero

Supero SUPERSERVER 6113L-8 Bedienungsanleitung

Supero

Supero 2022TC-BIBQRF Bedienungsanleitung

Supero

Supero SuperServer 6024H-82 Bedienungsanleitung

Supero

Supero 2122TG-HIBQRF Bedienungsanleitung

Supero

Supero SUPERSERVER 6026T-3RF Bedienungsanleitung

Supero

Supero SuperServer 6013L-8 Bedienungsanleitung

Supero

Supero SUPERSERVER 2027GR-TRFHT Bedienungsanleitung

Supero

Supero Supero SUPERSERVER 5018A-MLTN4 Bedienungsanleitung

Supero

Supero SuperServer 6113M-i Bedienungsanleitung

Supero

Supero SUPERSERVER 6018R-MT Bedienungsanleitung

Supero

Supero SUPERSERVER 6025W-NTR+ Bedienungsanleitung

Supero

Supero SuperServer 6036T-3R Bedienungsanleitung

Supero

Supero SUPERSERVER 2028TP-DC1R Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

Planet

Planet NAS-7410 Bedienungsanleitung