Suprema XPass D2 Bedienungsanleitung

2021/03/01 06:25 / How to Configure D2 Keypad

- https://kb.supremainc.com/knowledge/

Table of Contents

How to Configure D2 Keypad 1 ..............................................................................................................

Adding as a Slave Device 1 ................................................................................................................

Using the device as a Wiegand Reader 2 ...........................................................................................

2021/03/01 06:25 1/3 How to Configure D2 Keypad

- https://kb.supremainc.com/knowledge/

System Configuration, BioStar 2, “D2, Keypad”

How to Configure D2 Keypad

Xpass D2 Keypad is a new device introduced with BioStar 2.6.2.

It is a dummy reader for reading cards or PIN, which means it doesn’t perform data matching on the

device.

The device can be used as slave device, or a Wiegand reader to send Wiegand output.

The device sends out a Wiegand signal with the default 26bit format and the Wiegand configuration

will be done with a separate tool.

Adding as a Slave Device

You will need a master device to add the slave D2 Keyapd device.

Refer to the article below to learn how to search a slave device.

RS485 Mode (Master, Default, Slave)

If you enable the option 'Input card ID from keypad', user can authenticate by entering the card

number on the D2 Keypad.

2021/03/01 06:25 2/3 How to Configure D2 Keypad

- https://kb.supremainc.com/knowledge/

Possible key input ranges

The range of numbers that can be received by the keypad is 8 bytes (0 to

18,446,744,073,709,551,615)

Using the device as a Wiegand Reader

If you have already used the device as a slave device before, you must reset the device to use it as a

Wiegand reader (sending Wiegand output).

1. Delete the device from BioStar 2 client as a slave device.

2. Detach the metal bracket from the device.

3. Press the reset button.

4. Use the device as a Wiegand reader by adding it as a Wiegand Device on a master device.

2021/03/01 06:25 3/3 How to Configure D2 Keypad

- https://kb.supremainc.com/knowledge/

You cannot use the device as a slave device and use Wiegand output at the same time.

From:

https://kb.supremainc.com/knowledge/ -

Permanent link:

https://kb.supremainc.com/knowledge/doku.php?id=en:how_to_configure_d2_keypad

Last update: 2019/02/26 22:36

Andere Handbücher für XPass D2

3

Inhaltsverzeichnis

Andere suprema Kartenleser Handbücher

suprema

suprema WEBtec-4X Installationsanleitung

suprema

suprema RealPass-F Bedienungsanleitung

suprema

suprema XPass D2 Bedienungsanleitung

suprema

suprema Xpass S2 Bedienungsanleitung

suprema

suprema Xpass Bedienungsanleitung

suprema

suprema bioentry PLUS Bedienungsanleitung

suprema

suprema Xpass Bedienungsanleitung

suprema

suprema XPass D2 Bedienungsanleitung

suprema

suprema X-station Bedienungsanleitung

Beliebte Kartenleser Handbücher anderer Marken

Lindy

Lindy 43185 Bedienungsanleitung

Lindy

Lindy 43185 Bedienungsanleitung

ViziT

ViziT RD-4F Bedienungsanleitung

Jinmuyu Electronics

Jinmuyu Electronics MR811 Series Bedienungsanleitung

AVID ID

AVID ID AVID1043 Bedienungsanleitung

Conrad

Conrad PCMCIA Bedienungsanleitung

Rosslare

Rosslare DR-6255 Bedienungsanleitung

Lindy

Lindy 51541 Bedienungsanleitung

Diapro T?bbi Ürünler

Diapro T?bbi Ürünler Across System Bedienungsanleitung

Johnson Controls

Johnson Controls Kantech tyco ioSmart Bedienungsanleitung

ACS

ACS ACR122L Bedienungsanleitung

Secukey

Secukey S2-MF Bedienungsanleitung

Elecom

Elecom MR-SMC07 series Bedienungsanleitung

Alien

Alien ALR-9800 Bedienungsanleitung

ACS

ACS ACR310 Bedienungsanleitung

Datamars

Datamars R-IN1300 MID Bedienungsanleitung

Alarm Lock

Alarm Lock AL-PRE2 Bedienungsanleitung

xpr

xpr B100PROX-AH Benutzerhandbuch