suprema XPD2-GKDBS Bedienungsanleitung
XPass D2
(XPD2-GKDBS, XPD2-GDBS, XPD2-GKDB, XPD2-GDB)
INSTALLATION GUIDE
EN 101.00.XPD2-GKDB V1.00A
Version 1.00
English
Contents
Safety instructions............................................................................................3
Introduction ......................................................................................................5
Components ...................................................................................................................................................5
Name and function of each part ...............................................................................................................6
Cables and connectors ......................................................................................................................................................7
Installation ........................................................................................................8
Fixing the bracket and the product..........................................................................................................8
Cable connection.........................................................................................................................................10
Power supply connection..................................................................................................................................................10
RS-485 connection .............................................................................................................................................................10
Wiegand and other cable connections........................................................................................................................11
Restoring the Factory Defaults....................................................................................................................11
Resetting the baud rate of RS-485...............................................................................................................11
Product specifications.................................................................................. 12
Dimensions...................................................................................................................................................13
FCC compliance information ...................................................................... 14
Appendices..................................................................................................... 15
Disclaimers ...................................................................................................................................................15
Copyright notice..........................................................................................................................................15
Open Source License ....................................................................................................................................15
MIT License ........................................................................................................................................................................15
Safety instructions
3
Safety instructions
Observe the following instructions to use the product safely and prevent any risk of injury or property damage.
Warning
Noncompliance of instructions could lead to serious injury or death.
Installation
Do not install the product in a place with direct sunlight, moisture, dust, or soot.
•A fire or electric shock may occur.
Do not install the product in a place with heat from an electric heater.
•A fire or electric shock may occur due to overheating.
Install the product in a dry place.
•Otherwise, a product damage or electric shock may occur due to moisture.
Install the product in a place with no electromagnetic interference.
•Otherwise, a product damage or electric shock may occur.
The user should not install or repair the product independently.
•A fire, electric shock, or personal injury may occur.
•If the product has been damaged due to independent installation or repair of the product by the user, free A/S service will not
be provided.
Operation
Do not allow liquids such as water, beverages, or chemicals get into the product.
•A fire, electric shock, or product damage may occur.
Caution
Noncompliance of instructions could lead to minor injury or product damage.
Installation
Do not install the power supply cable in a place where people pass by.
•Product damage or physical injury may occur.
Do not install the product near a highly magnetic object such as a magnet, TV, (especially CRT) monitor, or speaker.
•A product failure may occur.
If installing the product outside where the product is completely exposed, it is recommended to install the product together with
the enclosure.
Keep the minimum separation distances between the devices when install multiple devices.
•Otherwise, RF performance is affect to the other device, the devices may not operate normally.
Safety instructions
4
Operation
Do not drop the product or apply an impact to the product.
•A product failure may occur.
When cleaning the product, wipe the product with a soft and dry cloth and no water, benzene or alcohol.
•Otherwise, a product failure may occur.
Introduction
5
Introduction
Components
NOTE
•Components may vary according to the installation environment.
XPass D2 Wall Bracket
PVC Anchor x 2
Wall Fixing Screw x 2
120 Ω resistor
Open Source Software Guide
Bracket Fixing Screw
(Star Shaped)
Drilling Template
Quick Guide
Shrink Tube
Introduction
6
Name and function of each part
Name Description
LED lamp Indicates the operational status of the device with the color of the LED lamp.
Keypad
Used to authenticate by entering the user ID directly. If you want to enter the ID directly,
change the authentication method settings in BioStar 2.
•0~ 9: Enters number.
•: Separates the FC code from the ID when entering the Wiegand card ID.
•
: Used to finish entering.
RF card authentication unit Reads RF cards for entering and exiting.
Reset button Initialize the device.
Cable
•Power cable
•RS-485 cable
•Wiegand output cable
•LED input cable
•Beep input cable
•Tamper cable
RF card
authentication unit
LED lamp
Reset button
Cable
Keypad
Introduction
6
Name and function of each part
Name Description
LED lamp Indicates the operational status of the device with the color of the LED lamp.
RF card authentication unit Reads RF cards for entering and exiting.
Reset button Initialize the device.
Cable
•Power cable
•RS-485 cable
•Wiegand output cable
•LED input cable
•Beep Input cable
•
Tamper cable
RF card
authentication unit
LED lamp
Reset button
Cable
Introduction
7
Cables and connectors
Pin Name Color
1
PWR +VDC
Red
2
GND
Black (White stripe)
3
485 TRXN
Yellow (Black stripe)
4
485 TRXP
Blue (White stripe)
5
WG D0
Green
6
WG D1
White
7
LED RED
Orange
8
LED GRN
Brown
9
BEEP
Purple
10
TMPR
Gray
Introduction
6
Name and function of each part
Name Description
LED lamp Indicates the operational status of the device with the color of the LED lamp.
RF card authentication unit Reads RF cards for entering and exiting.
Reset button Initialize the device.
Cable
•Power cable
•RS-485 cable
•Wiegand output cable
•LED input cable
•Beep Input cable
•
Tamper cable
RF card
authentication unit
LED lamp
Reset button
Cable
Installation
8
Installation
Fixing the bracket and the product
1 Determine the correct position to install the bracket using the provided drilling template. Fix the bracket firmly using fixing
screws through the bracket to the position where XPass D2 will be installed.
NOTE
•If installing XPass D2 on a concrete wall, drill holes, insert PVC anchors, and fix them with fixing screws.
•To avoid RF interference, a minimum separation distance must be maintained.
Wall thickness Distance
100 mm 400 mm
120 mm 380 mm
150 mm 380 mm
Wall 430 mm
Wall
Wall thickness
Distance
Wall 430 mm
Wall
Wall thickness
Distance
Dieses Handbuch passt für folgende Modelle
4
Inhaltsverzeichnis
Andere suprema RFID-System Handbücher
