Sure Electronics Remote Temperature Controller Bedienungsanleitung

Remote Temperature Controller

User’s Guide

REMOTE TEMPERATURE

CONTROLLER

USER’S GUIDE

Table of Contents

Chapter 1. Overview ..........................................................................................................1

1.1 Overview.............................................................................................................. 1

1.2 Features............................................................................................................... 1

1.3 Applications......................................................................................................... 2

1.4 Quick Start........................................................................................................... 2

Chapter 2. Setting..............................................................................................................3

2.1 Pin Definition....................................................................................................... 3

2.2 Working Mode ..................................................................................................... 3

2.3 Description of The Remote Control’s Keys ...................................................... 4

2.4 Working Mode Setting ........................................................................................ 7

Chapter 3. Electrical Characteristics ...............................................................................8

Chapter 4. Mechanical Drawing........................................................................................9

Chapter 5. Appendix........................................................................................................10

Chapter 6. Contact Us .....................................................................................................11

Remote Temperature Controller

ME-PC11121_Ver1.0_Page ii

NOTES:

Product Version ：Ver 1.0

Document Version ：Ver 1.0

REMOTE TEMPERATURE

CONTROLLER

USER’S GUIDE

Chapter 1. Overview

1.1 Overview

Thanks for using this remote temperature controller by Sure Electronics. This product is

populated with a high performance 8-bit PIC16F690 as the main chip, 7-segment LED

display is used as the display of temperature readings, timing and the settings, a relay to

control the external heating or cooling devices, a IR receiver receiving signals from the

7-key battery-powered remote control. It utilizes an external high precision water-proof

digital DS18B20 probe as the temperature sensor. Used together with a 7-key remote

control which is used to set the panel meter over the working modes, upper and lowers

limits of temperature value, °F /°C display and timer, it’s can be widely used in various

applications requiring temperature control and time control.

FIGURE 1-1 OVERVIEW OF THE PANEL METER

FIGURE 1-2 ACCESSORIES

Note: All the diagrams in this manual are for reference only.

1.2 Features

yMultiple working modes

yRelay output

yInfrared remote control

yWater-proof probe

yWorking mode memorable

ySelf-adapted to the ambient brightness

ME-PC11121_Ver1.0_Page 1

Remote Temperature Controller

1.3 Applications

yWater temperature control

yIndoor temperature control

yTime control applications

yOther DIY Applications

1.4 Quick Start

1. Connect the digital sensor DS18B20 as follows.

2. Power the panel meter with a supply (12VDC) as follows.

FIGURE 1-4 CONNECTION SCHEMATIC

3. Then the temperature from the digital probe is displayed on the panel meter.

FIGURE 1-5 TEMPERATURE DISPLAY

ME-PC11121_Ver1.0_Page 2

REMOTE TEMPERATURE

CONTROLLER

USER’S GUIDE

Chapter 2. Setting

2.1 Pin Definition

FIGURE 2-1 4-PIN CONNECTOR

TABLE 2-1 4-PIN CONNECTOR

Pin Mark Description

1 VCC Connect to the positive of DC12V supply

2 GND Connect to the negative of DC12V supply

3 OUT2 Relay output

4 OUT1 Relay output

2.2 Working Mode

TABLE 2-2 WORKING MODE

Working Mode Description

Display current temperature measured by DS18B20 with relay not

considered.

MOD0

Take the upper limit TH as the threshold. Ti>TH: relay open; Ti<TH:

relay closed. External heating devices are recommended.

MOD1

Take the upper limit TH as the threshold. Ti>TH: relay closed; Ti<TH:

relay open. External cooling devices are recommended.

MOD2

Take the upper and lower limits as the threshold and use hysteresis

control. Ti>TH: relay closed; Ti<TL: relay open.

MOD3

Take the upper and lower limits as the threshold and use hysteresis

control. Ti>TH: relay open; Ti<TL: relay closed.

MOD4

Utilize Time Relay mode. Before the set time: relay open; time up:

relay closed. Regularly open the external devices.

MOD5

Utilize Time Relay mode. Before the set time: relay close; time up:

relay open. Regularly close the external devices.

MOD6

ME-PC11121_Ver1.0_Page 3

Remote Temperature Controller

Note: Relay open: devices not working; relay closed: devices working.

2.3 Description of The Remote Control’s Keys

The 7-key user-definable infrared remote control utilizes NEC IR encoding mode and

integrates SC6122 IC as the remote control transmitter which utilizes CMOS Technology

specially designed for use on infrared remote control applications

FIGURE 2-2 OVERVIEW OF THE REMOTE CONTROL

TABLE 2-3 7-KEY INFRARED REMOTE CONTROL

Key Symbol Function Key Symbol Function

ON/OFF 5

Up (++)

Up (+) 6

Down (--)

Down (-) 7

SETOFF

SET - - -

ME-PC11121_Ver1.0_Page 4

Setting

TABLE 2-4 DESCRIPTION OF KEYS (KEY2(+), KEY3(-), KEY5(+ +), KEY6(- -))

Status + - ++ -- Description

Normal

temperature

display

Void Void Void Void

Kept pressing a key will affect

update of the temperature.

Timer

display

Timing

pauses

Timing

pauses

Timing

pauses

Timing

pauses

It’s not recommended to press

the keys unless resetting the

timer or modes is required.

Upper limit

setting +1 -1 +10 -10

Lower limit

setting +1 -1 +10 -10

The upper limit should be or 5

higher than the lower limit. The

limits should be within the

DS18B20’s measuring range of

(-55℃to +125℃)/(-67℉to

+257℉)

℃/℉setting ℉/℃℉/℃℉/℃℉/℃Pressing any of the four keys

can switch the display modes.

Timing

setting +1 -1 +10 -10

To any operation, the timing

should be within 1min to 99min.

Working

mode

setting

+1 -1 +1 -1

Continuously pressing one key,

the working mode will switch in

a cycle from mod0 to mod6 or

from mod6 to mod0. For

example, the current working

mode is mod0. Continuously

pressing key2(+), the working

mode will switch in a cycle of

mod0→mod1→mod2→mod3→

mod4→mod5→mod6→mod0.

Remote Temperature Controller

ME-PC11121_Ver1.0_Page 6

TABLE 2-5 DESCRIPTION OF KEYS (KEY1(ONOFF), KEY4(SET), KEY7(OK))

Status ONOFF SET OK Description

Normal

temperature

display

Turn

on/off

the

display

Upper

limit

setting

Refer to

instructions

If the current mode is mode 5 or

6, press “OK” key will activate

timer. Please refer to note 1 for

more details of “OK” key.(note 1)

Timer

display

Turn

on/off

the

display

Upper

limit

setting

Timing

pauses

It’s not recommended to press

the keys unless resetting the

timer or modes is required.

Upper limit

setting

Turn

on/off

the

display

Lower

limit

setting

Lower limit

setting

Turn

on/off

the

display

℃/℉

setting

℃/℉setting

Turn

on/off

the

display

Timing

setting

Timing

setting

Turn

on/off

the

display

Working

mode

setting

Working

mode

setting

Turn

on/off

the

display

Upper

limit

setting

Exit setting

and save

the setting

EEPROM.

The setting

won’t be lost

when power

drops.

In these modes, after the

operation of turning off the display

and then turning on the display,

the panel will normally display

temperature.

Note:

1. Instead of entering other working modes, the panel will normally display

temperature after the operation of turning off the display and then turning on the

display or the operation of repowering the panel after the power drops. Before

pressing “OK” to activate the working mode, you’re suggested to use “Set” key to

check the setting.

2. The panel will display temperature after the timing of MOD5/MOD6 ends.

3. All the settings (upper limit, lower limit, ℃/℉display, timing and working mode)

will be saved in EEPROM after power drops.

4. The upper and lower limits will correspondingly transact after the switching of ℃/

℉. The limits and the temperature readings displayed have the same unit.

5. If you don’t press “OK” to exit the setting before the power drops or display is

turned off, the current setting won’t be saved.

6. If the display is turned off during setting and then turned on, the panel meter will

normally display temperature readings or timing.

7. The timing will pause when you press any key. Do not press any key during timing,

or the timing won’t be accurate.

8. During normal temperature display, unplug or plug the DS18B20 will cause

temporary wrong display (85℃/185℉) but without other affect.

Setting

2.4 Working Mode Setting

TABLE 2-6 WORKING MODE SETTING

Working

Mode Condition Status Operation

MOD0

No external

devices (the

relay not used)

No other operations are needed after the

panel is powered. Press “ON/OFF” key to

turn on or off the display.

MOD1 External

heating devices

Single

threshold

SET→+/-(upper limit setting)

→SET→SET→SET→SET→+(mode1)

→OK

MOD2 External

cooling devices

Single

threshold

SET→+/-(upper limit setting)

→SET→SET→SET→SET→+→+(mode2)

→OK

MOD3 External

heating devices

Hysteresis

control

SET→+/-(upper limit setting) →SET→

+/-(lower limit setting)

→SET→SET→SET→+→+→+(mode3)

→OK

MOD4 External

cooling devices

Hysteresis

control

SET→+/-(upper limit setting) →SET→

+/-(lower limit setting)

→SET→SET→SET→+→+→+

→+(mode4)—>OK

MOD5

External

devices need to

be opened at a

specific time

Time relay SET→SET→SET→SET→+/-(time setting)

→SET→-→-(mode5) →OK

MOD6

External

devices need to

be closed at a

specific time

Time relay SET→SET→SET→SET→+/-(time setting)

→SET→- (mode6) →OK

Note: ℃/℉setting: SET→SET→SET→+/- →OK.

Inhaltsverzeichnis

Andere Sure Electronics Temperaturregler Handbücher

Sure Electronics

Sure Electronics XMTS Bedienungsanleitung

Beliebte Temperaturregler Handbücher anderer Marken

Swegon

Swegon LUNAd MB Bedienungsanleitung

Lucky Reptile

Lucky Reptile Thermo Control II Bedienungsanleitung

SENSORMETRIX

SENSORMETRIX Argon 100 Bedienungsanleitung

Fuji Electric

Fuji Electric PXE4 Bedienungsanleitung

Yuyao gongyi

Yuyao gongyi XMT-808 series Bedienungsanleitung

Selec

Selec TC544C Bedienungsanleitung

P.W. KEY

P.W. KEY rt-208gt Bedienungsanleitung

Future Design

Future Design FDC-9200 Bedienungsanleitung

BH Thermal

BH Thermal BriskONE Bedienungsanleitung

Omron

Omron E5EX-H Bedienungsanleitung

West Control Solutions

West Control Solutions KS 45 Kurzanleitung

MCS

MCS RITC-15B Bedienungsanleitung

SMC Networks

SMC Networks Thermo-con INR-244-639 Bedienungsanleitung

eltherm

eltherm Ex-TC It Series Bedienungsanleitung

Omron

Omron C200H-TV Series Bedienungsanleitung

industrie technik

industrie technik CA1 Bedienungsanleitung

KRAL

KRAL EET 32 Bedienungsanleitung

dixell

dixell XR420C Verdrahtungsschema