Surefire XVL2-IRC Bedienungsanleitung

WWW.SUREFIRE.COM

USER MANUAL

THESE COMMODITIES, TECHNICAL DATA AND/OR SOFTWARE ARE SUBJECT TO EXPORT CONTROLS ADMINISTERED BY THE U.S. GOVERNMENT.

EXPORT AND/OR RELEASE TO FOREIGN ENTITIES MUST COMPLY WITH THE APPROPRIATE U.S. GOVERNMENT REGULATIONS.

XVL2-IRC

XVL2-TN-IRC

PISTOL & CARBINE LIGHT / LASER MODULE SYSTEM

CLEARED

For Open Publication

Department of Defense

OFFICE OF PREPUBLICATION AND SECURITY REVIEW

Jul 09, 2021

WWW.SUREFIRE.COM

2 3

SWITCH

POSITION

LASER

OUTPUT

LASER

CLASSIFICATION

ILLUMINATOR

OUTPUT EYE SAFE

0OFF N/A OFF -

1OFF N/A WHITE -

2520nm <5mW CLASS IIIa OFF YES

3520nm <5mW CLASS IIIa WHITE YES

4OFF N/A OFF -

5850nm <0.7mW CLASS I INFRARED YES

6850nm <0.7mW CLASS I OFF YES

7OFF N/A INFRARED -

GN: 520nm at <5mW

IR: 850nm at <0.7mW

CLASS IIIa LASER PRODUCT

CLASS I LASER PRODUCT

LASER SAFETY

A laser produces a very narrow beam of light, which may cause physical harm to a human being.

Subsequently, all lasers are regulated by the Federal Government. Lasers are classiﬁed by the intensity of the

light they emit. Operational safety requirements are set by the Food & Drug Administration (FDA) and the

Center for Devices & Radiological Health (CDRH) in accordance with the potential hazard to the user.

Always follow the following guidelines:

1. Never look directly into the laser beam or stare at it at close range.

2. Never shine the laser in a person’s eye at close range.

3. Do not direct the beam at anyone operating a vehicle, boat, or aircraft, as the beam appears very bright

(especially at night) in a person’s eyes, even at great distances.

4. Be aware that beam can be reﬂected off of mirrors or shiny surfaces.

5. Use the laser sight only for its intended purpose.

TECHNICAL SPECIFICATIONS VISIBLE

ILLUMINATOR

INFRARED (IR)

ILLUMINATOR VISIBLE LASER INFRARED (IR) LASER

LASER BEAM COLOR White N/A Green No Color

LASER WAVELENGTH (NM) N/A 850 nm 520 nm 850 nm

OUTPUT POWER (MW) 400 Lumens 300 mW <5 mW (Class IIIa) <0.7 mW (Class I)

BEAM DIAMETER AT 25M (MM) N/A N/A 29.7 mm 29.4 mm

BEAM DIVERGENCE (MRAD) N/A N/A 1 mrad 1 mrad

NOMINAL OCULAR HAZARD

DISTANCE (NOHD) UNAIDED, (M)* N/A N/A 36.2 m (Class IIIa) 11.2 m (Class I)

NOMINAL OCULAR HAZARD

DISTANCE (NOHD) 5 CM AIDED, (M)* N/A N/A 232 m (Class IIIa) 56 m (Class I)

NOMINAL OCULAR HAZARD

DISTANCE (NOHD) 8 CM AIDED, (M)* N/A N/A 372 m (Class IIIa) 90 m (Class I)

NOMINAL OCULAR HAZARD

DISTANCE (NOHD) 12 CM AIDED, (M)* N/A N/A 558 m (Class IIIa) 134 m (Class I)

LASER CERTIFICATION N/A N/A Class IIIa (Training) Class I (Training)

EFFECTIVE RANGE IN DARKNESS (M) 54 meters 100 meters 200 meters 300 meters

EFFECTIVE RANGE IN DAYLIGHT (M) N/A N/A 50 meters N/A

OPERATING TEMPERATURE -10°C to 75°C -10°C to 75°C -10°C to 75°C -10°C to 75°C

* Based on calculation derived from ANSI Z136.1-2007 (asuming 90% optical efficiency for visible light and

70% optical efficiency for infrared laser)

WWW.SUREFIRE.COM

4 5

MODE SELECTION

SWITCH

POSITION

LASER

OUTPUT

LASER

CLASSIFICATION

ILLUMINATOR

OUTPUT EYE SAFE

0OFF N/A OFF -

1OFF N/A WHITE -

2520nm <5mW CLASS IIIa OFF YES

3520nm <5mW CLASS IIIa WHITE YES

4OFF N/A OFF -

5850nm <0.7mW CLASS I INFRARED YES

6850nm <0.7mW CLASS I OFF YES

7OFF N/A INFRARED -

INFRARED ACTIVATION

INDICATOR LED

Figure 1.

MOMENTARY & CONSTANT ON OPERATION

For momentary-on light operation, press and hold either the

right or left side of tailcap toggle switch; release to turn light off.

For constant-on operation, rotate tailcap toggle switch up or

down; rotate to turn light off.

REMOTE SWITCH INSTALLATION (OPTIONAL)

1. Use a 5/64” hex wrench to remove plate cover. Store for future use.

2. Align remote pistol switch pin contacts with contact

pads and screw holes on top of the weaponlight body.

3. Replace socket head screws into holes and screw into

body using a 5/64” hex wrench.

Tactical Modes are not eye safe and can lead to vision impairment.

Note: A low-signature green LED (Figure 1) will illuminate when either

infrared emitter is activated. When illuminated the LED provides a visual

indicator to determine if the infrared LED and/or laser have been left on

and when night vision is not available to detect any infrared emissions.

SAFETY SCREW

Note: If a torque wrench is not available use the supplied

5/64” hex key and hand tighten with light pressure until

the screw stops rotating.

WWW.SUREFIRE.COM

6 7

INSTALLING AND INTERCHANGING THE CROSS BLOCK OR T-SLOT RAIL

WITH INTEGRATED CROSS BLOCK

1. Loosen Rail-Adjustment Bolt by turning counterclockwise until Cross Block is fully exposed.

2. Remove Cross Block by lifting it out.

3. Place Cross Block into slot ensuring that the “P” or “U” letter on front edge of Cross Block is

facing forward (toward bezel).

4. Push Cross Block all the way forward and, while holding Cross Block in place, tighten Rail-Adjustment

Bolt by turning clockwise until T-Slot Rail overlaps Cross Block, locking it securely in place.

M17/P320

T-SLOT RAIL

UNIVERSAL

CROSS BLOCK

PICATINNY

CROSS BLOCK

Figure 1.

Note: The Picatinny or Universal Cross Blocks are not

necessary when installing the M17/P320 T-Slot Rail.

Store standard T-Slot, Picatinny and Universal

Cross Blocks for future use.

SIG SAUER P320 INSTALLATION

1. Using the supplied 7/64” hex key,

loosen Rail-Adjustment Bolt by turning

counterclockwise until T-Slot Rail is

removed completely from weapon light.

2. Remove the Rail Adjustment Bolt and

Lock Washer from the T-Slot Rail.

3. Install Rail Adjustment Bolt and Lock Washer into

M17/P320 T-Slot Rail (Figure 1), align with T-slot cut

in body and rotate Rail Adjustment Bolt with supplied

7/64” hex key clockwise until it engages in body.

ATTACHING TO HOST WEAPON RAIL

1. Using the supplied 7/64” hex key, adjust gap between stationary and T-Slot Rail by turning

Rail-Adjustment Bolt clockwise or counterclockwise until gap is sufﬁciently wide to ﬁt over

weapon accessory rail.

2. Align Fixed Rail with weapon’s accessory rail and hinge XVL2-IRC over the cross slot of host weapon

3. Mate Cross Block with corresponding cross slot in weapon’s accessory rail.

4. Secure by turning Rail-Adjustment Bolt clockwise until the XVL2-IRC ﬁts snugly onto host weapon rail.

Using a torque wrench and a 7/64” hex key, tighten to 8 in-lb onto a polymer pistol rail and to 8-9 in-lb

on a metal pistol rail. Do NOT overtighten! The Rail Adjustment Bolt will break if excessive force is

applied with a tool.

Note: If a torque wrench is not available, use the supplied 7/64” hex key

and hand tighten with light pressure until the screw stops rotating.

Note: The appropriate Cross Block MUST be installed to attach XVL2 to host weapon rail. Some pistols with a MIL-STD-1913

rail may require the Universal Cross Block to properly interface with the location of the front trigger guard surface. For Sig

Sauer M17/P320, use only supplied T-Slot Rail with integrated Cross Block with no additional Cross Block.

WWW.SUREFIRE.COM

8 9

ELEVATION KNOB

WINDAGE KNOB

ZEROING INSTRUCTIONS

1. While aiming with host weapon sights at the desired range, determine which direction(s) laser needs to

be adjusted for green dot’s position to match weapon’s point of impact (POI).

2. Make the necessary adjustments using a common tool to adjust the Windage and Elevation knobs per

instructions below, based on mounting position (from shooter’s perspective) and visible or infrared

laser dot’s relation to weapon’s point of impact (POI).

Note: Each click value for the Windage and Elevation knobs is 1 mil. If gross adjustment is required to zero the laser,

alternate between adjustment knobs while making incremental adjustments to prevent the laser module from binding.

Excessive tightening of the adjustment knobs can cause damage to the laser assembly.

If mounted at 6 o’clock position and POI is…

a. …left of point of aim, rotate Windage knob clockwise (CW).

b. …right of point of aim, rotate Windage knob counterclockwise (CCW).

c. …above point of aim, rotate Elevation knob counterclockwise (CCW).

d. …below point of aim, rotate Elevation knob clockwise (CW).

If mounted at 3 o’clock position (long guns only) and POI is…

a. …left of point of aim, rotate Elevation knob counterclockwise (CCW).

b. …right of point of aim, rotate Elevation knob clockwise (CW).

c. …above point of aim, rotate Windage knob counterclockwise (CCW).

d. …below point of aim, rotate Windage knob clockwise (CW).

If mounted at 9 o’clock position (long guns only) and POI is…

a. …left of point of aim, rotate Elevation knob clockwise (CW).

b. …right of point of aim, rotate Elevation knob counterclockwise (CCW).

c. …above point of aim, rotate Windage knob clockwise (CW).

d. …below point of aim, rotate Windage knob counterclockwise (CCW).

Note: SureFire recommends zeroing the laser sight at 25 yards, against a target, to coincide with point-of-aim of

the host weapon’s factory sights. Any discrepancy in point-of-aim (POA) versus point-of-impact (POI) at target

distances between 10 and 25 yards is negligible. Laser sight may require re-zeroing after the ﬁrst 10-50 rounds,

as the adjustment apparatus may settle into position.

Laser should be zeroed every time XVL2 is reattached to host weapon.

WWW.SUREFIRE.COM

10 11

LED MODUL

INDICATOR DOT

UNLOCKED

POSITION

LOCKED

BATTERY INSTALLATION / REPLACEMENT

1. Rotate by hand and align indicator dot with unlock symbol and gently pull forward on the LED Module.

2. Remove and appropriately discard depleted battery.

3. Insert fresh battery into the body with the positive (+) terminal facing forward as shown.

4. Align indicator dot on head with unlock symbol.

5. Insert LED Module into body and rotate by hand until dot is aligned with the lock indicator.

MAINTENANCE

Use supplied microﬁber cloth to wipe away dirt and debris from the LED windows and laser lenses.

If the microﬁber cloth is not available, use a clean soft tissue or cloth towel.

To remove more stubborn debris, spray affected area using supplied cleaning solution and let it sit for

10 seconds. A soft, nylon bristle brush can be used to break up the debris. Wipe debris away with a clean

soft tissue or cloth towel.

Always rinse XVL2 off with fresh water after being exposed to salt water or if exposed to salt spray.

Salt build up will affect the sealing mechanisms potentially causing water ingress failure.

Avoid using petroleum based cleaning products to prevent damage to seals and O-rings.

ALWAYS conﬁrm weapon is unloaded and on SAFE before attempting installation, service or adjustment of the XVL2-IRC.

BATTERY INFORMATION & WARNINGBATTERY INFORMATION & WARNING

Before replacing batteries, read the enclosed BATTERY INFORMATION/WARNING insert in your original packaging.

For additional battery safety, handling, and product information, visit www.sureﬁre.com/batteries.

WWW.SUREFIRE.COM

12 13

TOGGLE SWITCH

COMPONENT DIAGRAMS

TOGGLE SWITCH

WHITE LIGHT LED

INFRARED

LASER 850nM

VISIBLE LASER,

GREEN 520nM

INFRARED LED

MODE SELECTORWINDAGE KNOB

OFF / DISABLE

TOGGLE SWITCH

P320 T-SLOT RAIL

123A BATTERY

GREEN LASER

SAFETY SCREW

REMOTE SWITCH

(optional)

CROSS BLOCK O-RING GASKET

SWITCH PLATE SCREWS

MODE SELECTOR

SWITCH PLATE

WINDAGE KNOB

T-SLOT RAIL

(see Figure 1)

LED MODULE

INFRARED

LASER

Figure 1.

CROSS BLOCK

INFRARED ACTIVATION

INDICATOR LED

SWITCH PLATE

COVER

WWW.SUREFIRE.COM

14 15

PART DESCRIPTION COMMON PARTS Z88 Z88-TN

T-SLOT RAIL -24493-1 24493-11

RAIL ADJUSTMENT BOLT 12-02-138 - -

SPLIT RING WASHER 25-01-027 - -

SWITCH COVER -24670-1 24670-11

SWITCH COVER SCREW (2 ea) 12-02-124 - -

SWITCH COVER O-RING GASKET 19-01-215 - -

CROSS BLOCK, UNIVERSAL - 24616-1 24616-11

CROSS BLOCK, PICATINNY - 24669-1 24669-11

SIG SAUER P320 T-SLOT RAIL -24851-1 24851-11

SAFETY SCREW 12-02-136 - -

RAIL SCREW KEY, 7/64” 70-03-001 - -

SAFETY SCREW KEY, 5/64” 70-03-004 - -

SPARE PARTS KITS

PART DESCRIPTION COMMON PARTS BLACK TAN

LED MODULE -KM5-A-BK KM5-A-TN

REMOTE SWITCH, PISTOL, GLOCK (GEN3/

GEN4/GEN5 FRAMES) RSP-01 - -

REMOTE SWITCH, PISTOL, H&K P30/VP9

SERIES RSP-02 - -

REMOTE SWITCH, PISTOL, X-CARRY, X5

FULL-SIZE, X-VTAC AND P226R RSP-04 - -

REMOTE SWITCH, RIFLE, 7” SWITCH,

MOMENTARY ON PRESSURE PAD ONLY RSR-07 - -

RAIL GRABBER REMOTE SWITCH, RIFLE,

FOR XVL2, 7” SWITCH WITH MOMENTARY/

CONSTANT ON PRESSURE PAD RSR-SR07 - -

XVL2 ACCESSORIES

XVL2-IRC

LIGHT OUTPUT WH: 400 lumens IR: 300mW

LASER OUTPUT GN Laser: <5 mW (520 nm) IR: <0.7mW (850 nm)

RUNTIME 1.5 hours

PEAK BEAM INTENSITY 820 candela

DISTANCE 54 meters

CONSTRUCTION Aluminum

FINISH Hard Anodized (MIL-A-8625 Type III, Class 2)

WEIGHT (w/batteries) 5 oz (142 g)

LENGTH 3.0 in (7.62 cm)

BEZEL DIAMETER 1.06 in (2.7 cm)

BATTERIES One 123A lithium (incl.)

SWITCHING Ambidextrous push/toggle

LIQUID INGRESS

PROTECTION IPX8 (66 feet, 2 hours)

All performance claims tested to ANSI/NEMA FL1-2019 Standard.

SPECIFICATIONS

Revision C 6-2021

71-01-1093

XVL2-IRC

XVL2-TN-IRC

18300 MT. BALDY CIRCLE

FOUNTAIN VALLEY, CA 92708-6122

WWW.SUREFIRE.COM

WARRANTY

We’ll do what it takes to keep your SureFire gear running smoothly. SureFire warrants that if you — our customer — purchase one of our products,

and we determine that it is defective in material and/or workmanship during your lifetime, we will repair or replace it — no hassle!

Our warranty does not cover consumables or normal wear-and-tear — things like batteries draining, headbands and headpads wearing out,

ink cartridges running out, and switches wearing out — or damage resulting from abuse, alterations, unauthorized repairs, or use contrary to

SureFire’s user manuals.

Should you need a replacement product, SureFire reserves the right to replace an obsolete product with a current production, like model. In the event

that any issue with a SureFire product is not covered under this warranty SureFire can arrange to have the product repaired for a reasonable fee.

STANDARD DISCLAIMER

Except as speciﬁed above or prohibited by applicable law: all express or implied conditions and warranties, including, without limitation, any

implied warranty or condition of merchantability or ﬁtness for a particular purpose, or accuracy of any informational content, are hereby excluded

and disclaimed by SureFire; and in no event will SureFire be liable for any special, direct, indirect, consequential, incidental or punitive damages

howsoever arising and regardless of the theory of liability, even if advised of the possibility of such damages. Products, prices, availability,

speciﬁcations, and offers are subject to change or cancellation at any time without notice.

WARRANTY CLAIMS

For repair or replacement contact Customer Service at 714-545-9444 and obtain a Return Merchandise Authorization number (RMA#).

Then package the unit carefully and return (no CODs please) to:

SureFire, LLC.

Repairs Department, RMA#____

17680 Newhope Street, Suite B

Fountain Valley, CA 92708

SureFire will pay any reasonable shipping costs to return the unit to you.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Surefire Taschenlampe Handbücher

Surefire

Surefire G2X LE Bedienungsanleitung

Surefire

Surefire FURY-DFT Bedienungsanleitung

Surefire

Surefire FURY INTELLIBEAM Bedienungsanleitung

Surefire

Surefire AVIATOR-RD Bedienungsanleitung

Surefire

Surefire M2 Bedienungsanleitung

Surefire

Surefire UDR DOMINATOR Bedienungsanleitung

Surefire

Surefire Powerselect 9AN Commander Bedienungsanleitung

Surefire

Surefire C2 Centurion Bedienungsanleitung

Surefire

Surefire A2-HA-xx Bedienungsanleitung

Surefire

Surefire G2ZX COMBATLIGHT Bedienungsanleitung

Surefire

Surefire 6PX TACTICAL Bedienungsanleitung

Surefire

Surefire LumaMax L2 Bedienungsanleitung

Surefire

Surefire LumaMax L5 Bedienungsanleitung

Surefire

Surefire EB1C-A-BK Bedienungsanleitung

Surefire

Surefire Stiletto PLR-A Bedienungsanleitung

Surefire

Surefire M1 Bedienungsanleitung

Surefire

Surefire TITAN PLUS Bedienungsanleitung

Surefire

Surefire LumaMax L6 Bedienungsanleitung

Surefire

Surefire STILETTO PLR-A Bedienungsanleitung

Surefire

Surefire M2 Bedienungsanleitung

Surefire

Surefire G2Z MV COMBATLIGHT Bedienungsanleitung

Surefire

Surefire E2T-MV TACTICIAN Bedienungsanleitung

Surefire

Surefire LumaMax L4 Bedienungsanleitung

Surefire

Surefire FURY-DFT Bedienungsanleitung

Beliebte Taschenlampe Handbücher anderer Marken

StreamLight

StreamLight PROPOLYMER 2AA Bedienungsanleitung

StreamLight

StreamLight Stinger Bedienungsanleitung

Silverline

Silverline 994024 Bedienungsanleitung

Gama Sonic

Gama Sonic 23i60065 Bedienungsanleitung

Ryobi

Ryobi RFL180M Bedienungsanleitung

RIB

RIB SPARK ACG7061 Bedienungsanleitung

Abicor Binzel

Abicor Binzel MB EVO PRO Series Bedienungsanleitung

PELI

PELI 7610 Bedienungsanleitung

Black & Decker

Black & Decker FSL18 Bedienungsanleitung

Black & Decker

Black & Decker 9506 Bedienungsanleitung

Berner

Berner 341709 Bedienungsanleitung

PELI

PELI 3415 Zone 0 Bedienungsanleitung

ADC

ADC Adlite Pro Wartungshandbuch

Fervi

Fervi 0338 Bedienungsanleitung

Milwaukee

Milwaukee M18 IL Bedienungsanleitung

Spectronics

Spectronics Spectroline LeakTracker SPI-LT Bedienungsanleitung

Larson Electronics

Larson Electronics SLEDB-110V-M Bedienungsanleitung

vulta

vulta hurricane 262 lumen fg-e15 Bedienungsanleitung