SurePoint SENTINEL Bedienungsanleitung

396-5477Y1

Installation Guide

Operator’s Manual

SurePoint Ag Systems

Table Of Contents

Introduction

• Safety ..............................................................................................................2-3

Components - Modules, Wiring, Mounting

• Parts and Fittings ............................................................................................ 4-5

• Harness Overview / Layout.............................................................................. 6-7

• Row Control Valve Interface Module ............................................................... 8

• Sentinel Module and Valve Mounting Options............................................................... 9-14

• Harness Drawings - 5022 - Rate Control /Row Monitoring............................... 15-20

• Connector Pinouts - 5022................................................................................ 21

• CAN Trunklines, Front ISO Extension ............................................................. 22-23

• Mounting PumpRight pump, Hydraulic and Plumbing Connections ................. 24-29

Setup & Operation

• Getting Sentinel on VT................................................................................... 30-31

• Sentinel Icons ................................................................................................ 32

•

• Sentinel Row Control & Row Monitoring Setup................................33-49

• Setup Overview ............................................................................................. 34-35

• Settings - Product - Device Setup .................................................................. 36

• Sections, Rows, Tolerance, Rates, Smoothing .............................................. 36-37

• Implement, Speed , Hardware (Foot switch, Height switch), Task Control ..... 38

• Rate Setup, Smoothing, Flow Adjustment, 2 product setup............................ 39(37)

• Flow Module Addressing and Valve Module Addressing................................ 40

• Customizing Scans and Alarms, Flow Module Diagnostics ........................... 41

• Setup Settings for Row Control - Control Speed, Flow Cal, PWM Max ......... 42

• Valve Setup and Row Detail Screen .............................................................. 43

• Software Version, Auxiliary Settings, Feature Unlock Code ........................... 44

• Customizable Toolbar, Totalizer Counters ..................................................... 45

• Row Control Run Screen and Operation and Setup Summary....................... 46-48

• Nozzle Test - Test with Simulated Speed and Rate ....................................... 49

•

• Manual Section Valve Operation.................................................................... 50

• Manual Pump Operation ................................................................................ 50

• Auto Test - Run with simulated speed and rate.............................................. 50

• Troubleshooting........................................................................................... 50-53

• Winterization, Pump Oil Change .................................................................... 54

• Replacing Valves and Diaphragms ................................................................ 54

• Pre-season Service........................................................................................ 55

• Pump Assembly and Part Breakdowns .......................................................... 56-58

• PWM Valve and Motor Parts.......................................................................... 59

Specifications and features may change and may be different from what is shown here.

Setup for any particular system may be different from what is described here.

SurePoint Ag Systems

Safety A

TAKE NOTE! THIS SAFETY ALERT SYMBOL FOUND THROUGHOUT THIS MANUAL IS USED TO CALL YOUR

ATTENTION TO INSTRUCTIONS INVOLVING YOUR PERSONAL SAFETY AND THE SAFETY OF OTHERS.

FAILURE TO FOLLOW THESE INSTRUCTIONS CAN RESULT IN INJURY OR DEATH.

THIS SYMBOL MEANS

ATTENTION!

BECOME ALERT!

YOUR SAFETY IS INVOLVED!

Note the use of the signal words DANGER, WARNING and CAUTION with the safety messages. The appropriate

signal word for each has been selected using the following guidelines:

DANGER: Indicates an imminently hazardous situation that, if not avoided, will result in death or se-

rious injury. This signal word is to be limited to the most extreme situations typically for machine

components which, for functional purposes, cannot be guarded.

WARNING: Indicates a potentially hazardous situation that, if not avoided, could result in death or

serious injury, and includes hazards that are exposed when guards are removed. It may also be

used to alert against unsafe practices.

CAUTION: Indicates a potentially hazardous situation that, if not avoided, may result in minor or

moderate injury. It may also be used to alert against unsafe practices.

NOTICE is used to address safety practices not related to personal safety.

SurePoint Ag Systems

Hydraulic Fluid and Equipment Safety

This system uses hydraulic equipment with hydraulic fluid under extremely high pressure.

Hydraulic fluid escaping under pressure can have sufficient force to penetrate the skin causing serious injury.

Keep all hoses and connections in good serviceable condition. Failure to heed may result in serious personal

injury or death. Avoid the hazard by relieving the pressure before disconnecting lines or performing work on

the system.

Make sure hydraulic fluid connections are tight and all hydraulic hoses and lines are in good condition before

applying pressure to the system. Use a piece of paper or cardboard, NOT BODY PARTS, to check for sus-

pected leaks. Wear protective gloves and safety glasses or goggles when working with hydraulic systems.

DO NOT DELAY!

Check hydraulic hoses and fittings frequently. Loose, broken, and missing hardware can cause equipment to

not perform properly and can result in serious injury or death.

Hydraulic systems can be hot and cause burns. Before working on any system, wait until the fluid has

cooled.

If an accident occurs, see a doctor familiar with this type of injury immediately. Any fluid injected into the skin

or eyes must be treated within a few hours or gangrene may result.

A Word to the Operator

It is YOUR responsibility to read and understand the safety messages in this manual. YOU are the key to

safety.

SAFETY IS YOUR RESPONSIBILITY.

SurePoint Ag Systems

Introduction

Components

ITEM NO. PART NUMBER DESCRIPTION

1204-01-4625AAGB1B1 Sentinel™ Flowmeter Module

2120-T3MT3F-4XT1M T3 Male/Female Manifold w/ (4)T1 Male Outlets

3124-02-010003 T3 Fork

4120-T3FTEE T3 Tee

5120-T3MPLUG T3 Male FC Plug

6124-02-010004 T4 Fork

7120-T4FT3FRC T4 Female x T3 Female FC Reducer Coupling

8120-T4MT3MRN T4 Male x T3 Male FC Reducer Nipple

9121-T3M075-90 T3 Male FC x 3/4" HB - 90 degree

10 121-T3F075 T3 Female x 3/4” HB

11 124-01-G11056-VViton O-Ring for T1 fittings

12 124-01-G11058-VViton O-Ring for T3 fittings

13 124-01-G11054-VViton O-Ring for T4 fittings

See next page for a list of T1 ngs

Parts and Fittings

SurePoint Ag Systems

Parts and Fittings

for

Isolated Rows

Introduction

Components

Part Number Descripon

113-12-038038 Stem Elbow—3/8” Stem x 3/8” QC

113-05-025 Plug - 1/4” QC

13-05-038 Plug - 3/8” QC

Part Number Descripon

120-T1M038QC T1 Male x 3/8” QC

120-T1M025QC T1 Male x 1/4” QC

121-T1M038 T1 Male x 3/8” HB

121-T1M050 T1 Male x 1/2” HB

124-01-G11056-VViton O-ring for T1 Fings

Part Number Descripon

204-01-4625AAGB1B1 4-Row Sennel ow meter

124-02-010001 T1 Fork

374-4024Y1 4-Pin Amp Superseal dust plug

384-1105 Hardware Kit - mounng bolts

T1 Fings

Commonly used Quick-Connect (QC) Fings

Sennel Flow Meter

SurePoint Ag Systems

The SurePoint Sentinel module communicates with the Sentinel ECU through a proprie-

tary communication network (CAN). The Sentinel ECU then, using the ISOBUS commu-

nication protocol, relays the flow information through the tractor ISOBUS and generates

the user interface on the in-cab display. A series of connections are required to form this

communication network.

SurePoint Harness Layout for ISO Sentinel

Tractor Connection

Designed to integrate with any imple-

ment, in some cases, connecting the

Sentinel starts at the tractor’s ISOBUS

connection. Power and information is

relayed to the Sentinel ECU using a

SurePoint Front ISO Extension which

includes power and CAN bus connec-

tions. Already using the tractor ISOBUS?

No Problem. SurePoint carries ISOBUS-

Y harnesses to split the ISO connection

at the tractor.

Service Connections

The Terminating Resistor, Programming

and RS232 connectors are for service

only and should not be used. Bus Connections

2 Bus connections are provided for convenience so that

each side of the implement can plug into the ECU har-

ness without the need for a long, continuous chain of

connections.

Implement Height and

Speed Input

Not used in all configurations, the imple-

ment height and speed input connections

provide additional input options in situa-

tions that require advanced alarm control

and an auxiliary speed source. These

conditions generally exist only in hybrid

systems, utilizing multi-branded compo-

nents.

In-Cab Display

(user-provided)

CAN Bus and Power-

Out Connectors

(Terminator)

Implement Switch

Meter Meter

Front ISO Extension

(oponal)

Tractor

ISOBUS

Sennel ECU

Speed Input

Term. Resistor

Programing

LS Controller Prod 2

LS Controller Prod1

RS232

Components

SurePoint Ag Systems

Wiring & Elec.

SurePoint Harness Layout for ISO Sentinel C

Components

CAN/Power in CAN/Power out

(terminate or connect

to other ISO device))

Meter Bus 1

Meter Bus 2

Communicaon

Dust Plug

Terminate or connect

addional trunklines

Terminate or connect

addional trunklines

The Sentinel flowmeter module is chained together

with other modules using the provided trunklines and

then later assigned an implement location within the

display (module addressing). The CANBUS

trunkline is connected to the Sentinel module

through the port labeled +12Vdc while the remaining

port is plugged. CAN connections cannot be left

open. When a terminator is removed to plug in a

trunkline, the terminator must be moved to the end of

the trunkline. It is not required to utilize both Bus

connections on the main harness. If Meter Bus 2 is

not used, plug a terminator in to that connector.

Add 4-pin

Extension where needed

206-04-XXXX

CAN trunkline

208-06-XXXX

Add 4-pin

Extension where

needed

206-04-XXXX

Sentinel Row Control Valve Interface

226-01-4211Y1

Sentinel Flowmeter Module

204-01-4625AAGB_B_

When doing the Module Addressing pro-

cess, rst plug in all the Sennel Flowmeter

modules, then go to Valve Module Diag-

noscs and plug in all the Sennel Row

Control Valve Interface Modules.

SurePoint Ag Systems

Sentinel Row Control Valve Interface 226-01-4211Y1

CANBUS - Connect to

Trunkline (CANBUS

Device connector) dur-

ing Module addressing

process

VALVE A -B -C -D

Connect to the correct

row control valve

(match A - B - C - D

with the Sentinel

Flowmeter module

plumbing for each

row)

Sentinel Row Control Valve Interface

226-01-4211Y1

Sentinel Flowmeter Module

204-01-4625AAGB_B_

CANBUS - Connect to Trunkline

during Module addressing process

Connect to Valves A & B

Connect to Valves C & D

Individual Row Control Valve

SurePoint Ag Systems

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung