Suzuki AZ1801 Bedienungsanleitung

User Manual

AZ1801

5-19

OTHER CONTROLS AND EQUIPMENT

69RH0-74E

Installation of radio frequency

transmitters

We recommend that you always ask a

SUZUKI dealer or a qualified workshop

about frequency band, max output power,

antenna position at vehicle and specific

conditions for installation and/or use before

installing a radio transmitter in your vehi-

cle. Such equipments may cause the elec-

tronic control system to malfunction if they

are incorrectly installed or they are not

suited for the vehicle.

Audio system (if equipped)

Safety information

Open source definition

This Product includes following open

source software.

mbedtls version 2.5.1

SPDX-License-Identifier: Apache-2.0

Licensed under the Apache License, Ver-

sion 2.0 (the “License”); you may not use

this file except in compliance with the

License.

You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-

2.0

Unless required by applicable law or

agreed to in writing, software distributed

under the License is on an “AS IS” BASIS,

WITHOUT WARRANTIES OR CONDI-

TIONS OF ANY KIND, either express or

implied.

See the License for specific language gov-

erning permissions and limitations under

the License.

This file is part of mbed TLS (https://

tls.mbed.org)

Please be noted that a portion of this soft-

ware is made by changing or modifying

original source files.

WARNING

If you pay too much attention to

operating the audio system or view-

ing the audio system display while

driving, an accident can occur. If

you set the sound volume too loud,

it could prevent you from being

aware of road and traffic conditions.

• Keep your eyes on the road and

your mind on the drive. Avoid pay-

ing too much attention to operat-

ing the audio system or viewing

the audio system display.

• Familiarize yourself with the audio

system controls and operation of

the audio system before driving.

• Preset your favorite radio stations

before driving so that you can

quickly tune to them using the

presets.

• Set the sound volume to a level

that will allow you to continue to

be aware of road and traffic condi-

tions while driving.

• Set the smartphone dock on to the

Audio system at a comfortable

viewing angle and familize your-

self with the smartphone applica-

tion controls.

User Manual

AZ1801

5-20

OTHER CONTROLS AND EQUIPMENT

69RH0-74E

Basic operations

69RM05001

(1) “VOL/PWR” knob

(2) “MODE” button

(3) MICROPHONE (for handsfree)

(4) “DISP/BACK” button

(5) “MENU” button

(6) “TUNE/FLD” knob

(7) USB/AUX

(8) SMARTPHONE DOCK CAP

(9) “SEEK UP” button

(10) “SEEK DOWN” button

TUNE

FLD VOL

PWR

AUX

MODEDISP/

(5) (4)(6) (2)

(10)

(9)

(7)

(8)

(1)(3)

Turning on/off power

Press “VOL/PWR” knob (1) to turn on the

power. The unit starts to operate in the pre-

vious mode that the power was turned off.

• To turn off the power, press “VOL/PWR”

knob (1) for about 1 second.

Adjusting the volume

Turn “VOL/PWR” knob (1).

• Turning it clockwise increases the vol-

ume.

• Turning it counterclockwise decreases

the volume.

Mute

• Press “VOL/PWR” knob(1) to mute the

sound.

• To cancel mute, press any button.

NOTE:

For the purpose of safe driving, adjust the

audio volume to a level that allows you to

hear sounds outside of the vehicle includ-

ing car horns and particularly emergency

vehicle sirens.

5-21

OTHER CONTROLS AND EQUIPMENT

69RH0-74E

Sound settings

1) Press “MENU” button (5). Setup menu

will be displayed.

2) Turn “TUNE/FLD” knob (6) to select

“Sound Settings”, and press the knob

(6) to determine the selection.

3) Turn “TUNE/FLD” knob (6) to select

one of the settings as follows, and

press the knob (6) to determine the

selection.

Equalizer

The equalizer can set various types of

sounds depending on the type of music.

1) Turn “TUNE/FLD” knob (6) to select

“Equalizer”, and press the knob (6) to

determine the selection.

2) Turn “TUNE/FLD” knob (6) to select

one of the settings as follows, and

press the knob (6) to determine the

selection.

NOTE:

• When you select “Custom”, the sound

curve can be adjusted as your prefer-

ence. Turn “TUNE/FLD” knob (6) to

adjust values of sound, and press the

knob (6) to determine the selection.

• “>> <<” mark appears at both left and

right ends of the currently selected

equalizer.

Adjusting bass/treble/balance/fader

1) Turn “TUNE/FLD” knob (6) to select

“Bass”, “Treble”, “Balance” or “Fader”,

and press the knob (6) to determine the

selection.

2) Turn “TUNE/FLD” knob (6) to adjust the

sound, and press the knob (6) to deter-

mine the selection.

• “Bass” / “Treble”:

– Can be adjusted in levels -6 to 0 to +6.

– Turn “TUNE/FLD” knob (6) clockwise

to adjust the low or high frequency and

turn the knob (6) counterclockwise to

quiet.

• “Balance”:

– Can be adjusted in 9 level left to right.

– Turn “TUNE/FLD” knob (6) clockwise

to emphasize the right speaker, and

turn the knob (6) counterclockwise to

emphasize the left speaker.

• “Fader”:

– Can be adjusted in 9 level back to

front.

– Turn “TUNE/FLD” knob (6) clockwise

to emphasize the front speaker, and

turn the knob (6) counterclockwise to

emphasize the rear speaker (if

equipped).

NOTE:

When you adjust to emphasize the rear

speakers, sound output may fade out com-

pletely in case vehicle is not equipped with

rear speakers.

Equalizer

Bass

Treble

Balance

Fader

AVC

Speaker Configuration

Flat

Classic

Jazz

Rock

Hip-Hop

Pop

Custom

5-22

OTHER CONTROLS AND EQUIPMENT

69RH0-74E

Adjusting the AVC (Auto volume con-

trol)

The Auto Volume Control (AVC) function

automatically adjusts (increases/

decreases) the sound volume in accor-

dance with vehicle speed. The AVC control

is provided with four selectable levels

(LEVEL OFF, 1, 2, 3). The level of volume

adjustment increases together with the

LEVEL number.

1) Turn “TUNE/FLD” knob (6) to select

“AVC”, and press the knob (6) to deter-

mine the selection.

2) Turn “TUNE/FLD” knob (6) to adjust the

level, and press the knob (6) to deter-

mine the selection.

Adjusting the sound parameters as per

speaker configuration

1) Turn “TUNE/FLD” knob (6) to select

“Speaker Configuration”, and press the

knob (6) to determine the selection.

2) Turn “TUNE/FLD” knob (6) to select

“2SPK” or “4SPK”, and press the knob

(6) to determine the selection.

• “2SPK”:

Sound is generated from the front

speakers.

• “4SPK” (if equipped):

Sound is generated from the all speak-

ers.

NOTE:

For optimal sound experience, ensure that

speaker configuration is selected as per

the actual speakers present in the vehicle.

System settings

1) Press “MENU” button (5). Setup menu

will be displayed.

2) Turn “TUNE/FLD” knob (6) to select

“System Settings”, and press the knob

(6) to determine the selection.

3) Turn “TUNE/FLD” knob (6) to select

one of the settings as follows, and

press the knob (6) to determine the

selection.

Beep on/off

Beep sound is activated when error mes-

sage is displayed or during operations of

few button.

Beep setting can be turned on or off

through the following steps:

1) Turn “TUNE/FLD” knob (6) to select

“Beep”.

2) Press “TUNE/FLD” knob (6) to select

“ON” or “OFF”.

Security setting

Refer to “Anti-theft feature” later in this

section.

Initialize setting

You can delete the registered Bluetooth®

device information.

1) Turn “TUNE/FLD” knob (6) to select

“Initialize”, and press the knob (6) to

determine the selection.

2) Turn “TUNE/FLD” knob (6) to select

“Reset BT”, and press the knob (6) to

determine the selection.

3) Turn “TUNE/FLD” knob (6) to select

“YES”, and press the knob (6) to deter-

mine the selection.

Beep

Security

Initialize

Vehicle Alerts

Reverse Warning Priority

Auto Scroll

RDS

SmartPhone APP

5-23

OTHER CONTROLS AND EQUIPMENT

69RH0-74E

Vehicle alerts setting

You can turn on or off the warning indica-

tions related to vehicle system using this

setting. By default, this setting is ON for all

alerts.

1) Turn “TUNE/FLD” knob (6) to select

“Vehicle Alerts”, and press the knob (6)

to determine the selection.

2) Turn “TUNE/FLD” knob (6) to select

one of the settings as follows, and

press the knob (6) to determine the

selection.

3) Press “TUNE/FLD” knob (6) to select

“ON” or “OFF”.

4) Following are the warning display

related to vehicle system:

• “Parking Brake Engaged”:

Parking brake is engaged.

• “Seat Belt Open”:

Seat belt(s) is (are) remaining unbuck-

led.

• “Door Open”:

Doors are not completely closed.

• “Low Fuel”:

Fuel is low.

NOTE:

If you push “DISP/BACK” button (4) while

the warning and indicator messages is dis-

played, the indication will disappear.

Reverse warning priority setting

On applying reverse, volume of audio sys-

tem gets lowered. By default, this setting is

ON. This setting can be turned on or off

through the following steps:

1) Turn “TUNE/FLD” knob (6) to select

“Reverse Warning Priority”, and press

the knob (6) to determine the selection.

2) Turn “TUNE/FLD” knob (6) to select

“No” or “Yes”, and press the knob (6) to

determine the selection.

Auto scroll setting

Auto scroll setting is ON by default.

If the text contains more characters, “>”

mark will appear at the right end and the

display changes to the next set of charac-

ters automatically.

1) Turn “TUNE/FLD” knob (6) to select

“Auto Scroll”.

2) Press “TUNE/FLD” knob (6) to select

“ON” or “OFF”.

RDS (Radio Data System) setting

Enabling this setting displays the mes-

sages transmitted by FM station. This set-

ting is ON by default. You can choose to

turn ON/OFF this setting through the fol-

lowing steps:

1) Turn “TUNE/FLD” knob (6) to select

“RDS”.

2) Press “TUNE/FLD” knob (6) to select

“ON” or “OFF”.

NOTE:

• Messages are displayed only when RDS

signal is included in FM radio waves.

• The messages are displayed program

service name only.

Smartphone app setting

Refer to section 5-52 for details about

smartphone application.

Smartphone app can be used only when

app setting is enabled as ON.

Refer to “Suzuki Smartplay Dock applica-

tion” later in this section for details.

1) Turn “TUNE/FLD” knob (6) to select

“SmartPhone APP”.

2) Press “TUNE/FLD” knob (6) to select

“ON” or “OFF”.

NOTE:

An Apple device can be connected in

either Bluetooth®or iPod mode. Blue-

tooth®mode has higher priority over iPod

Mode. In case, you want to connect the

Apple device on iPod mode instead, use

the above setting and change Smartphone

app setting to “OFF”

Parking Brake Engaged

Seat Belt Open

Door Open

Low Fuel

5-24

OTHER CONTROLS AND EQUIPMENT

69RH0-74E

Listening to the radio

69RH145

Display

69RM05002

TUNE

FLD VOL

PWR

AUX

MODEDISP/

(4) (3)

(1)

(2)

(D)

(B) (C) (A)

(1) UP button

(2) DOWN button

(3) “MODE” button

(4) “TUNE/FLD” knob

(A) Frequency

(B) Band

(D) RDS data

NOTE:

Radio Reception

Radio reception can be affected by envi-

ronment, atmospheric conditions, or radio

signal’s power and distance from the sta-

tion.

Nearby mountains and buildings may inter-

fere or deflect radio reception, causing

poor reception. Poor reception or radio

static can also be caused by electric cur-

rent from overhead wires or high voltage

power lines.

5-25

OTHER CONTROLS AND EQUIPMENT

69RH0-74E

Selecting the band

1) Press and hold “MODE” button (3) to

change to the list of available modes.

2) Turn “TUNE/FLD” knob (4) to select

“FM” or “AM”, and press the knob (4) to

determine the selection.

NOTE:

You can also switch the display in

sequence by short pressing the “MODE”

button (3).

Seek tuning

Press and hold UP button (1) or DOWN

button (2) to start searching.

The unit stops searching for a station at a

frequency where a broadcast station is

available.

Manual tuning

Turn “TUNE/FLD” knob (4).

The frequency being received is displayed.

Preset memory

1) Tune to the desired station.

2) Press “TUNE/FLD” knob (4) to change

the display to the preset channel list.

3) To store the station, turn “TUNE/FLD”

knob (4) to select one of the channels,

and press and hold the knob (4) to

determine the selection.

4) To select station from the preset chan-

nel list, press “TUNE/FLD” knob (4) to

change the display to the preset chan-

nel list.

Turn “TUNE/FLD” knob (4) to select

one of the channels, and press the

knob (4) to determine the selection.

NOTE:

12 stations can be stored for FM, and 6

stations can be stored for AM.

In case a station is stored over an existing

preset station, previous data will be overid-

den.

Auto store

1) Press and hold “TUNE/FLD” knob (4) to

start searching when in FM/AM mode.

Some stations in good reception will

automatically be stored to preset chan-

nel list in order, starting from a station

whose frequency is the lowest.

2) To select station from the preset chan-

nel list, press “TUNE/FLD” knob (4) to

change the display to the preset chan-

nel list while auto store mode indication

NOTE:

• Auto Store can be cancelled by pressing

the “DISP/BACK” button.

• When the auto store is performed, the

station previously stored in the memory

at the position is overwritten.

• 6 stations can be preset for FM-AS, and

6 stations can be preset for AM-AS in

auto store mode.

5-26

OTHER CONTROLS AND EQUIPMENT

69RH0-74E

Listening to files stored in a USB device

69RH146

Display

69RM05003

TUNE

FLD VOL

PWR

AUX

MODEDISP/

(6) (5) (4) (3)

(1)

(2)

(C)

(B)

(A) (D)

(1) “UP” button

(2) “DOWN” button

(3) “MODE” button

(4) “DISP/BACK” button

(5) “MENU” button

(6) “TUNE/FLD” knob

(A) Track number

(B) Play time

(if supported by audio device)

(D) Repeat/Random status Indication

NOTICE

Do not connect any USB device other

than a USB memory or a USB audio

player. Do not connect multiple USB

devices to the USB connector using a

USB hub, etc. Supplying power to

multiple USB devices from the con-

nector could cause overheating,

smoke and permanent damage to

audio system.

Inhaltsverzeichnis

Andere Suzuki Autoempfänger Handbücher

Suzuki

Suzuki ACROSS Bedienungsanleitung

Beliebte Autoempfänger Handbücher anderer Marken

Motorola

Motorola VWA63 Bedienungsanleitung

Nextar

Nextar D3201 Bedienungsanleitung

Alpine

Alpine CDE-163BT Bedienungsanleitung

Pioneer

Pioneer DEH-P645R Bedienungsanleitung

Axxera

Axxera XDMA7600 Betriebsanleitung

XM OnyX Bedienungsanleitung

Sound Storm

Sound Storm STM93R Bedienungsanleitung

Soundstream

Soundstream VIR-5000 Bedienungsanleitung

Avson

Avson MKT Platform Bedienungsanleitung

Sony

Sony MEX-1HD - Audio Library System Bedienungsanleitung

Pioneer

Pioneer DVH-P500UB Bedienungsanleitung

JVC

JVC KD-AHD69 Bedienungsanleitung

Blaupunkt

Blaupunkt SANTIAGO CR 87 Bedienungsanleitung

Sony

Sony CDX-4160 - Cd Receiver Bedienungsanleitung

XFIRE AUDIO

XFIRE AUDIO BMW42S Bedienungsanleitung

VDO

VDO CD 2253 Bedienungsanleitung

Volvo

Volvo 13 84 580 Bedienungsanleitung

ZENEC

ZENEC ZE-160DVD Bedienungsanleitung