Sven Combat Bedienungsanleitung

OPERATION

MANUAL

Wireless Gamepad

www.sven.ѵ

combaT

ENG

Operation Manual combaT

CONTENTS

1. DESCRIPTION ..................................................................................

2. SAFETY PRECAUTIONS ......................................................................

3. PACKAGE CONTENTS .......................................................................

4. SPECIAL FEATURES ...........................................................................

5. SYSTEM REQUIREMENTS ....................................................................

6. DESCRIPTION OF THE ǅONSTRUCTION ....................................................

7. CONNECTION AND INSTALLATION ........................................................

8. TROUBLESHOOTING .......................................................................

Technical support is on www.sven.Н

Congratulations on your purchase of the Sven gamepad!

Please read this Operation Manual before using the unit and retain this Operation Manual in a safe

place for future reference.

TRADEMARKS

All trademarks are the property of their legal holders.

NOTICE OF RESPONSIBILITY RESTRICTION

Despite the exerted eԚorts to make this Manual more exact, some discrepancies may occur. The

information of this Manual is given on “as is” terms. The author and the publisher do not bear any

liability to a person or an organization for loss or damage which has arisen from the information

contained in this Manual.

UNPACKING

Unpack the device carefully. Make sure there are no accessories left in the box. Check up the device

for damage; if the product was damaged during transportation, address the ԛrm which carried out

the delivery; if the product functions incorrectly, address the dealer at once.

ENG

Wireless Gamepad

1. DESCRIPTION

COMBAT Wireless Gamepad can be used in diԚerent games such as simulators, arcades, shooter

games, etc. Vibration feedback imparts a feeling of realistic experience during games. Ergonomic

construction of COMBAT enhances accuracy of its operation during games.

2. SAFETY PRECAUTIONS

• Do not disassemble or repair the device on your own. Maintenance and repairs should be carried out

by qualiԛed service center staԚonly.

• Protect the device from direct impact of high humidity, dust, strong magnetic ԛelds, vibrations, high

temperatures, toxic liquids and gases.

• Instructions for device maintenance: please clean the case of the device with clean soft cloth. Do

not use such solvents as gasoline or spirit for cleaning, since they can damage the surface of the

device.

• Do not drop the device to avoid damaging it.

3. PACKAGE CONTENTS

•

Gamepad — 1 pc

• 2.4 GHz receiver — 1 pc

• ƴƴƴ type battery

—

4 pcs

•

Setup CD disk —1 pc

•

Operation manual — 1 pc

•

Warranty card — 1 pc

4. SPECIAL FEATURES

• Ergonomic design

• Supports DirectX 7.0 and up, Windows XP/Vista/7/8

• USB Interface

• 2.4 GHz receiver with coverage range up to 7 m

• Vibration feedback function for higher realistic eԚect

• Turbo function for continuous ԛring

• 4 axes, D-Pad, 2 joysticks and 12 buttons

• FC button for connecting the gamepad to the receiver

• 4 ƴƴƴ type batteries included

• 2 modes: digital mode and analog mode

5. SYSTEM REQUIREMENTS

•USB port available

•Windows XP/Vista/7/8 OS

•DirectX 7.0 Version and up

ENG

Operation Manual combaT

abcdefg

hij

6. DESCRIPTION OF THE CONCTRUCTION

aD-pad

bTURBO: turbo mode

on/oԚswitch

cButton 9

dMACRO: reprogramming

of buttons

eButton10

fFC: button for connecting

the gamepad to the receiver

gButtons 1–4

hLeft joystick (button 11)

iMode LED

jMODE: mode switch button

kRight joystick (button 12)

lButton 6

mButton 8

nButton 5

oButton 7

pPOWER: power on/oԚswitch

qBatteries

rBattery compartment

sVIBRATION: vibration

on/oԚswitch

tBattery compartment cover

uUSB cable

vFC: button for connecting

the gamepad to the receiver

wConnection LED

Fig. 1. Top view

Fig. 2. Rear view

ENG

Wireless Gamepad

pqrs

Fig. 3. Bottom view

Fig. 4. Receiver

Installing batteries

• Open the cover tof the battery compart-

ment r.

• Install AAA type batteries qinto the battery

compartment following their polarity.

• Close the cover of the battery compartment.

Note! Always install a set of the same new

batteries. Incorrect installation of batteries

may damage the gamepad!

7. CONNECTION AND INSTALLATION

ϜAfter installation of batteries 2connect the 2.4GHz receiver via the USB cable 6to an available

USB port of your PC. After connecting to your PC, the device is automatically detected as a game

controller and is fully ready for use. However, for Vibration Feedback function it is necessary to

install drivers. Calibration of the second joystick is also impossible without the installation of drivers.

ϜShift the POWER ON/OFF switch 1into the ON position. To connect the gamepad to the receiver

for the ԛrst time, press the FC button on the receiver 7, its LED 8will light up, then press the FC

button 'on the gamepad. There is also another way to connect the gamepad to the receiver: press

the FC button on the receiver, then press the combination of buttons 9+11 simultaneously on the

gamepad and hold these buttons for 15 seconds. Pay attention: the receiver and the gamepad will

be disconnected if the gamer presses one of 9+11 buttons after the connection has been made.

ϜInsert Software CD disk into your PC CD Rom and start setup.exe to install the drivers. To test the

gamepad and make adjustments, choose a Control Panel -> Devices and Printers (Control Panel ->

Devices and Printers), click the right mouse button on the icon of Gamepad and clickl at Parameters.

Properties (Fig. 5) window will open up on your desktop.

ϜClick Function Test (Fig. 5) to test axes and buttons.

Fig. 5

ENG

Operation Manual combaT

ENG

Wireless Gamepad

• Enter Calibration Function (Fig. 6) to calibrate all four axes.

• Enter Vibration Test (see Fig. 7) to test and set Vibration Feedback function:

• increase or reduce vibration strength by moving the cursor. For example: vibration strength is

85% in Fig. 7;

• test Vibration Feedback function on the left or/and right motors by pressing Left force, Both force

and Right force;

• after setting and testing, press ǂƾ (conԛrm) at the bottom of the window.

Notice! Vibration Feedback function is switched ON or OFF with the VIBRATION ON/OFF

switch s.

Fig. 6

ENG

Operation Manual combaT

• Switching between modes

The device can work in the analog and digital modes. The modes are switched with the MODE

buttonj. In the analog mode (red LED) all 4 axes and 12 buttons are accessible, in the digital mode

(LED is oԚ) 2 axes and 10 buttons are accessible.

Switch on the Macro mode with the button dto reprogram buttons or analog joysticks to other

functions. LED will be green or orange (if the analog mode is on). Then press a button, the function

of which should be changed, then press a button or buttons, to which functions the programmed

button should be changed, and press Macro again to quit the program mode. Press Macro and the

button, which has been programmed, to switch oԚ. Everything being reprogrammed will store in the

Gamepad memory, and when the device is oԚthe settings are not reset.

Fig. 7

ENG

Wireless Gamepad

If none of the above mentioned solutions removes the problem, please consult your nearest

authorized service center. Never try to repair the device on your own.

7. TROUBLESHOOTING

Problem

The gamepad does not work

normally after installation of

drivers on the PC.

Drivers can’t be installed on the

PC.

Some analog axis goes into

eԚect automatically.

After the gamepad is con-

nected, its driving program

can’t be found.

After entering the game,

vibration feedback function

operates automatically.

During the game vibration

feedback is insuԝcient.

Solution

ƴ. Check whether the gamepad is connected properly to

your PC.

B. Make sure that all the settings in Game Controller are

installed and conԛrmed.

C. Check whether the settings of the gamepad are in conԜict

with other peripherals.

D. Restart your PC if the device still does not work normally.

Install DirectX 7.0 or higher.

The gamepad hasn’t been calibrated or the calibration

hasn’t been conԛrmed.

Enter My computer оProperties оHardware оDevice

manager and delete the corresponding equipment with «!»

mark and reconnect the gamepad to the PC. Then your PC

will ԛnd the driving system.

Enter Force Feedback and calibrate it.

Enter Force Feedback and set the force of feedback.

• TURBO function (continuous shooting)

The Turbo function is designed to imitate multiple pressing with one-time pressing and holding of

any button. Press any button from 1 to 12 to activate the function, then, hold it and press the TURBO

button b. Now the button will function in the TURBO mode. Fulԛll the similar actions as for

activation to cancel the TURBO function: press the button which works in the TURBO mode, hold it

and press the TURBO button b.

ǀǢǘǙǟǰ:

COMBAT

ƼǠǣǢǤǦǙǤ ǖǄǢǥǥǜǜ: ǂǂǂ «ǅƾƴǁƸƼǆǄƹƿ», 111024,

Ǆǈ, Ǘ. ǀǢǥǞǖǔ, ǧǟ. ƴǖǜǔǠǢǦǢǤǡǔǳ, ǘ. 65, ǥǦǤ. 1.

ǇǣǢǟǡǢǠǢǫǙǡǡǔǳ ǢǤǗǔǡǜǛǔǪǜǳ ǖǄǢǥǥǜǜ:

ǂǂǂ «Ǆǆ-ǈ», 105082, Ǘ. ǀǢǥǞǖǔ, ǧǟ. ǈǤǜǘǤǜǩǔ

ǑǡǗǙǟǰǥǔ, ǘ. 75, ǥǦǤ. 5.

ǇǥǟǢǖǜǳ ǗǔǤǔǡǦǜǝǡǢǗǢ ǢǕǥǟǧǚǜǖǔǡǜǳ ǥǠǢǦǤǜǦǙ

ǖǗǔǤǔǡǦǜǝǡǢǠ ǦǔǟǢǡǙ ǜǟǜ ǡǔ ǥǔǝǦǙ www.sven.ѵ.

ƷǔǤǔǡǦǜǝǡǯǝ ǥǤǢǞ: 12 ǠǙǥ. ǅǤǢǞ ǥǟǧǚǕǯ: 2 ǗǢǘǔ.

ǃǤǢǜǛǖǢǘǜǦǙǟǰ: «ǅƶƹǁ ǃǆƹ. ƿǜǠǜǦǙǘ»,

176 Ƹǚǧ ǋǜǔǦ ǄǢǧǘ, д02-02, ǅǜǡǗǔǣǧǤ, 427447.

ǃǤǢǜǛǖǙǘǙǡǢ ǣǢǘ ǞǢǡǦǤǢǟǙǠ «ǅǖǙǡ ǅǞǔǡǘǜǡǔǖǜǳ

ƿǜǠǜǦǙǘ», 48310, ǈǜǡǟǳǡǘǜǳ, ƾǢǦǞǔ,

ƾǢǦǢǟǔǩǘǙǡǦǜǙ, 15. ǅǘǙǟǔǡǢ ǖƾǜǦǔǙ.

Manufacturer: SVEN PTE. LTD, 176 Joo Chiat Road,

д02-02, Singapore, 427447. Produced under the

control of Oy Sven Scandinavia Ltd. 15, Kotolahdentie,

Kotka, Finland, 48310. Made in China.

® Registered Trademark of Oy SVEN

Scandinavia Ltd. Finland. combaT

Wireless Gamepad

Inhaltsverzeichnis

Andere Sven Videospiel-Controller Handbücher

Sven

Sven SCOUT Bedienungsanleitung

Sven

Sven GC-W700 Bedienungsanleitung

Sven

Sven GC-3050 Bedienungsanleitung

Sven

Sven GC-250 Bedienungsanleitung

Sven

Sven GC-W600 Bedienungsanleitung

Sven

Sven GC-W700 Bedienungsanleitung

Sven

Sven GC-3050 Bedienungsanleitung

Sven

Sven GC-W500 Bedienungsanleitung

Sven

Sven Aggressor Bedienungsanleitung

Sven

Sven GC-W400 Bedienungsanleitung

Sven

Sven DRIFT Bedienungsanleitung

Sven

Sven GC-400 Bedienungsanleitung

Sven

Sven GC-400 Bedienungsanleitung

Sven

Sven GC-3050 Bedienungsanleitung

Sven

Sven GC-400 Bedienungsanleitung

Sven

Sven GC-W800 Bedienungsanleitung

Sven

Sven Driver Bedienungsanleitung

Sven

Sven SPEEDY Bedienungsanleitung

Sven

Sven GC-5070 Bedienungsanleitung

Sven

Sven GC-5070 Bedienungsanleitung

Sven

Sven GC-W600 Bedienungsanleitung

Sven

Sven GC-W750 Bedienungsanleitung

Sven

Sven GC-150 Bedienungsanleitung

Sven

Sven X-PAD AERO Bedienungsanleitung

Beliebte Videospiel-Controller Handbücher anderer Marken

Wasp

Wasp SL-6610 Bedienungsanleitung

JKG

JKG JKG2022A Bedienungsanleitung

Marvo

Marvo MG08 Bedienungsanleitung

Belkin

Belkin F8GBPC001 Bedienungsanleitung

GameSir

GameSir Z2 Bedienungsanleitung

Laser

Laser PCO-AGAMEC-BK Bedienungsanleitung

Cortex

Cortex VEXnet Bedienungsanleitung

Gioteck

Gioteck HF-1 Bedienungsanleitung

Nacon

Nacon DAIJA ARCADE STICK Bedienungsanleitung

Thrustmaster

Thrustmaster dual trigger Bedienungsanleitung

SHAKS

SHAKS S1+ Bedienungsanleitung

YCCTEAM

YCCTEAM Joy Con Bedienungsanleitung

Hyperkin

Hyperkin Smartboy Bedienungsanleitung

Nerf

Nerf DuraGrip Bedienungsanleitung

MoveMaster

MoveMaster MoveMaster Bedienungsanleitung

WinWing

WinWing Super Libra J1 Bedienungsanleitung

ECCI

ECCI Trackstar 6000 Series Bedienungsanleitung

Logitech

Logitech 963291-0403 - Attack 3 Joystick Bedienungsanleitung

Sven combat Bedienungsanleitung

Beliebte Videospiel-Controller Handbücher anderer Marken