Swann RedAlert Single Channel Digital Security... Bedienungsanleitung

RedAlert™

If this device does not work when you first plug it

in, do not take it back to the store.

Contact the Swann Helpdesk using our fast e-mail service

[email protected] or call us on one of the Toll-Free

numbers shown on the back cover of this booklet.

Most problems can be quickly and easily fixed with a simple

e-mail or a quick chat with one of our friendly technical staff.

(Toll-Free available in the US and Australia only)

Installation Guide

Wireless Security Kit

Single Channel Digital Security Recorder

Swann Technical Support

All Countries E-mail: [email protected]

Telephone Helpdesk

UNITED STATES toll free

1-800-627-2799

1-877-274-3695

(Su, 2pm-10pm US PT)

USA Exchange & Repairs

562-777-2551

(M-F, 9am-5pm US PT)

AUSTRALIA toll free

1300 138 324

(M 9am-5pm AUS ET)

(Tu-F 1am-5pm AUS ET)

(Sa 1am-9am AUS ET)

New Zealand toll free

0800 479 266

International

+61 3 8412 4610

See http://www.worldtimeserver.com for information on different time zones

and the time in Melbourne Australia compare to your local time.

(M-Th, 6am-10pm US PT)

(F 6am-2pm US PT)

Swann warrants this product against defects in workmanship and material for a

period of one (1) year from it’s original purchase date. You must present your

receipt as proof of date of purchase for warranty validation. Any unit which proves

defective during the stated period will be repaired without charge for parts or

labour or replaced at the sole discretion of Swann. The repair or replacement will

be warranted for either ninety days or the remainder of the original one year

warranty period, whichever is longer. The end user is responsible for all freight

charges incurred to send the to Swann’s repair centres.

shipping from and to any country

other than the country of origin. The warranty does not cover any incidental,

accidental or consequential damages arising from the use of or the inability to use

this . Any costs associated with the fitting or removal of this product by a

tradesman or other person or any other costs associated with its use are the

responsibility of the end user. This warranty applies to the original purchaser of the

only and is not transferrable to any third party.

Unauthorised end user or third party modifications to any component or evidence

of misuse or abuse of the device will render all warranties void.

product The end user is

responsible for all shipping costs incurred when

product

Help Desk / Support Details

Warranty Information

www.swannsecurity.com

English

FCC WARNING

STATE MENT

This device complies

with Part 15 of FCC Rules.

Operation is subject to the

following two conditions:

(1) This device may not

cause harmful interference

and

(2) this device must

accept any interference

received, including

interference that may

cause undesired operation

WARNING: IMPORTANT

NOTICE ABOUT CORRECT

USE OF POWER ADAPTER

The correct orientation

for the enclosed power

adapter is in a vertical

or floor mount position.

L’orientation correcte pour

L’adapteur secteur fourni

est dans une position

verticale ou plancher-

monte.

La orientacion correcta para

el adaptador electrico incluido

es en posicion vertical o instalado

en el suelo.

RedAlert Digital Video Recorder Manual RedAlert Digital Video Recorder ManualRedAlert Digital Video Recorder Manual

Table of Contents

215

Table of Contents

Package Contents

Using the SD Card Slot

Connecting the Camera Power Supply

Changing the Camera Channels

Changing the Wireless Camera Channel on the DVR

Changing Cameras and Viewing 2 Cameras PIP (Picture-in-Picture)

Motion Detection Setup

Choosing Video or Photo Recording

TV Mode and Picture Quality Settings

Advanced Motion Detection Setup

Viewing and Deleting Saved Images

Changing Folders

Connecting additional wireless cameras

Achieving the best wireless signal

RedAlert Specifications

Wireless Outdoor Camera Specifications

Tips and Troubleshooting

5-6

8-10

13 Wireless Outdoor Camera Specifications

RedAlert DVR Specifications

1 Video Output

1 Video Input

Built in 4 CH Wireless Receiver (DVR records only 1 camera at a time)

Operating Power: 5V DC

Preset to NTSC or PAL Depending on Region (manually adjustable)

16MB internal memory

Output Format - AVI, JPEG

Maximum SD Capacity - 2GB

Recording Format: AVI Video 10s

JPEG images

Recording Resolution: JPEG 640 X 480

AVI 320 X 240

Wireless Channel Frequencies: 2414, 2432, 2450 & 2468MHz

Using the SD Card Slot

Insert an SD card with label facing up into the RedAlert DVR. The DVR can handle SD

cards up to 2GB. Once the card is inserted the DVR will save recordings to the SD card.

You can playback images on a monitor directly from the RedAlert or insert the card into a

card reader on your computer to view recordings. Recordings are saved as AVI for videos

and JPEG for still images.

Package Contents

- RedAlert DVR

- Antenna

- DVR Power Supply

- Instruction Manual

- Easy Setup Guide

- Wireless Outdoor Camera (WOC)

- WOC Power Supply

- SD Card

- Video Out Cable

- Video In Cable

Channels: 2414, 2432, 2450 & 2468MHz

Operating Power: 8/9V DC

Power Consumption: 65-110mA

1 7

Size: 54 x 43mm (2 / ” x 1 / ”)

8 10

Antenna: Omni-directional

Transmitting Range: 20-30m (conditions may limit)

Weight: 7 / oz (220 grams)

Operating Temperature: 32° - 122°F ~ (0° - 50°C)

Sensor: 1/3”(8.5mm) Color CMOS

Horizontal Resolution: 380 TV lines

Minimum Illumination: 1 Lux@ f1.2

Lens: (5.6mm) 60 degrees

NOTE:

All jurisdictions have specific laws and regulations relating to the use of

cameras. Before using any camera for any purpose, it is the buyer’s

responsibility to be aware of all applicable laws and regulations that prohibit

or limit the use of cameras and to comply with the applicable laws and

regulations.

The legality of watching people other than yourself changes from country to

country and even state to state. Contact your local government's privacy

information body or your local Police for more information on what if any

restrictions you may face.

If onboard memory or SD memory is full, the DVR will automatically overwrite the oldest

images or video first ensuring the DVR keeps recording.

Note: When an SD card is

inserted, an icon appears

showing it is detected by the

RedAlert. All images will now

be recorded to the SD card.

SDSD

Camera Power Adaptor (8V)

Night Hawk Camera with Stand

Troubleshooting Your Wireless Outdoor Camera

Poor Picture:

Realign antennas until image quality improves, slightly adjust the position of the Camera or

Receiver. Change the location of the Camera, or use a different height or angle to see if the

image improves. In some cases interference may be caused by another device on a similar

frequency to the channel you are using.

Lines only - no clear picture:

Check to confirm there is no microwave oven or other 2.4GHz equipment operating close by

ie; Cordless Telephones, Wireless Baby Monitors, Wireless LAN equipment etc . Make sure

the Receiver is on the correct channel.

Picture ghosting or interference:

Some home appliances such as Wireless LANs, 2.4GHz portable telephones and

Microwave ovens operate on or near the 2.4GHz frequency. If you receive interference from

such an appliance, try moving the Camera or Receiver to location further away from the

appliance or in the event of interference from a Wireless LAN device, try changing the

Wireless LAN to a different channel to improve the signal quality.

No picture:

Check the receiver to confirm it is turned ON and make sure the A/V connection of the

Receiver is not plugged into the Audio Out socket. Make sure the Receiver is on the correct

channel. Check to ensure the camera is plugged in and has power. Check that the channel

on the receiver is the set to Channel x.

Red haze over picture:

In some cases where the sun shines into the front of the camera a faint red glow can be

seen. Move the camera to a shaded location, or fit a hood to stop sunlight entering the

camera lens directly.

Foreground is dark while background is too bright:

If the camera is looking from a dark area towards a light area in some cases the automatic

exposure can find it difficult to balance the image correctly. Change the location of the

camera so that the point of greatest interest has the largest area of the image.(if you want to

see the bright area, move the camera so that almost all of the screen shows this area. If you

want to see the darker area, move the camera so that most of the image shows this area.

Fig. (1)

Unscrew front case at the seam

anti-clockwise to remove

Frequency Channel Settings

Connecting the Camera Power Supply

Changing the Camera Channels

Changing the Wireless Camera Channel on Your DVR

To change wireless channels on your DVR, push the SET button on the front casing. The

light indicates the current wireless channel i.e. CH1, CH2, CH3, CH4. Push the display

button (DISP) to change views between your wired and wireless cameras.

Fig. (2)

1 2

Channel 1

Both switches up

2414MHz

Channel 2

Left up & Right down

2432MHz

Channel 3

Left down & Right up

2450MHz

Channel 4

Both switches down

2468MHz

Front view of lens with switches

in top left, note the numbers 1 &

2 indicated at the bottom of the

switch

Changing these switch settings changes the frequency that

the camera transmits on. Once you have set the channel on

the camera, select the same channel on your RedAlert. If you

experience interference try different channels. Make sure

multiple cameras are set to different frequencies so you can

use them in the same area with the DVR.

RedAlert Digital Video Recorder ManualRedAlert Digital Video Recorder Manual

Changing Cameras and Viewing 2 Cameras PIP (Picture-in-Picture)

The RedAlert DVR can display a wired and wireless camera in PIP mode. Note when

viewing PIP only the main full screen image will be recorded.

To switch cameras and view PIP

1. Press the Display button once to switch camera views between your wired and wireless

cameras.

Tips and Shortcuts

The RedAlert unit has 16MB of memory installed for viewing saved images on your monitor

only. For additional storage an SD card is strongly recommended. The unit will accept

standard SD cards up to 2GB in size.

Transfer your images from the SD card to your computer via a card reader (not included).

Video files are saved as AVI files and photos are saved as JPEG files which can be read by

the most computers.

The DVR can record 1 camera at a time, i.e. 1 wired camera or 1 wireless camera.

If motion detection does not appear to detect your subject, lower the sensitivity or Target

Value as described on page 8 and try expanding the region of motion or bounding box size

as described on page 6.

Use the Up Arrow to quickly turn motion detection on or off when viewing a live image.

Use the Down Arrow to switch between photo and video recording when viewing a live

image.

Consult the Easy Setup Guide for information on camera connections.

For assistance with this product contact Swann Technical Support on 1-800-627-2799 in

USA or 1300 13 8324 in Australia. Alternatively, email us at [email protected]

2. Press the Display button again to view both cameras in PIP mode.

3. Press the Display button again to swap camera views.

Motion Detection Setup

1. Press the Menu button to enter menu interface.

2. Press Left/Right to highlight the Motion Detection On/Off option.

RedAlert Digital Video Recorder Manual

413

Connecting additional wireless cameras

The RedAlert DVR is capable of receiving up to 4 wireless cameras. Note only the

displayed camera can be recorded. The DVR operates on the following frequencies: CH1 -

2414MHz, CH2 - 2432MHz, CH3 - 2450MHz, CH4 - 2468MHz.

Push the Set button on the front of the RedAlert to change wireless camera channels. The

light indicators show the active wireless channel. Push the display button (DISP) to switch

between wired and wireless camera mode.

Achieving the best wireless signal

Depending on local conditions wireless signals may vary. A clear line of sight from the DVR

to the camera will achieve the best image. Walls, metals and other wireless devices may

impact the quality of an image. If too much interference occurs on any channel, move the

camera or DVR to another location or change camera channels.

3. Press OK to toggle Motion Detection ON or OFF.

4. Press Left/Right to highlight the desired option (Delete One, Delete All, Format, Exit)

and then press OK to confirm the selection.

5. Press Left/Right to select Confirm (check) or Cancel (X) option, and then press OK to

select.

4. Press the Left/Right buttons to highlight Exit and then press OK to exit the menu.

SHORTCUT: When viewing your camera press the UP arrow to quickly toggle Motion

Detection ON/OFF.

Choosing Video or Photo Recording

1. Press the Menu button to enter menu interface.

RedAlert Digital Video Recorder Manual RedAlert Digital Video Recorder Manual

Changing Folders

1. While in playback mode press the Display button to bring up the folder listing.

2. Press Up/Down to choose the folder you want to see, and then press OK to confirm.

5. Press Mode to exit playback and return to live view.

2. Press the Left/Right buttons to highlight Capture Format Photo/AVI (Video). 11. Press Left/Right to highlight the Exit option and then press OK to return menu

interface.

SHORTCUT: To exit or go to previous menus press the Menu button on the DVR

3. To delete an image, in playback mode press Menu to bring up the delete menu.

Viewing and Deleting Saved Images

1. When viewing a live image press Mode to enter playback mode and view saved images.

3. Press OK to toggle Photo or AVI (video) recording.

4. Press the Left/Right buttons to highlight Exit and then press OK to exit the menu.

SHORTCUT: When viewing your camera press the DOWN arrow to quickly toggle between

Photo or Video.

RedAlert Digital Video Recorder Manual RedAlert Digital Video Recorder Manual

6 11

2. Press Left/Right to switch between images.

RedAlert Digital Video Recorder Manual RedAlert Digital Video Recorder Manual

TV Mode and Picture Quality Settings

1. Press the Menu button to enter menu interface.

2. Press Left/Right to highlight Setup and then press OK.

8. Press Left/Right in the Setup menu and highlight Motion Detect Sensitivity and press

OK.

9. This screen shows the bounding box where motion will be detected.

Current Value is the level of motion that is currently being detected on a scale of 0~99

where 0 is no motion and 99 is the highest level of motion.

Target Value is the level of motion required to set off motion detection. For motion to be

detected the Current Value must be higher than the Target Value.

10. Press Left/Right to set the Target Value (or sensitivity) between 0~99. Adjust the

sensitivity to the level needed for your conditions. Press OK to return to the Setup menu.

Note: In our example above, Target Value is set to 10. Motion will only be recorded when the level of motion (Current

Value) in the bounding box reaches 10 or more.

3. Press OK to toggle TV mode from PAL/NTSC.

NOTE: The default setting is NTSC in North America and PAL for Europe/Australasia

4. Press Left/Right to highlight the picture Quality option.

RedAlert Digital Video Recorder Manual RedAlert Digital Video Recorder Manual

Advanced Motion Detection Setup

1. From the Setup menu, press the Left/Right buttons to highlight Motion Detection Area

and press OK.

2. Press Left/Right to change the size of the area of detection (Large, Medium or Small

Box) and then press OK. Motion will be detected only within the box selected.

3. Press Up/Down/Left/Right to move detection box to a region you would like to detect

motion and then press OK to confirm and return to the Setup menu.

5. Press OK to change the Motion Detect Count. This value can be set to 1, 3 or 5 photos

taken per motion detection event.

6. Next, press Left/Right to highlight Motion Detect Interval. This setting indicates the

pause in seconds between two separate motion events.

7. Press OK to change the pause or delay to 1, 3 or 5 seconds between motion events.

4. Press Left/Right to highlight Motion Detect Count in the Setup menu. Motion Detect

Count indicates how many photos will be taken per motion detection.

Note: This feature applies to photo recording only

5. Press OK to toggle High/Low image quality. If you are trying to conserve memory space

use Low otherwise the High setting is recommended.

Andere Handbücher für RedAlert Single Channel Digital Security...

Andere Swann Sicherheitssystem Handbücher

Swann

Swann One Bedienungsanleitung

Swann

Swann 4 Channel DVR4-2000 Bedienungsanleitung

Swann

Swann DVR16-8600 Combo Bedienungsanleitung

Swann

Swann GuardianEye Bedienungsanleitung

Swann

Swann Alert DVR Camera Kit Bedienungsanleitung

Swann

Swann DVR4-2500 Bedienungsanleitung

Swann

Swann SW343-DP2 Bedienungsanleitung

Swann

Swann HD Pro-Series Bedienungsanleitung

Swann

Swann SW351-WSA Bedienungsanleitung

Swann

Swann DVR4-5500 Bedienungsanleitung

Swann

Swann MICROCAM II SW-P-MC2A Bedienungsanleitung

Swann

Swann RedAlert SW244-WDW Bedienungsanleitung

Swann

Swann MDRIVE2260214E Bedienungsanleitung

Swann

Swann NVR Bedienungsanleitung

Swann

Swann SwannSecure Bedienungsanleitung

Swann

Swann DEFEND & DETER SWA43-D12C16 Bedienungsanleitung

Swann

Swann DVR4-1200 Bedienungsanleitung

Swann

Swann REDALERT SW242-WDV Bedienungsanleitung

Swann

Swann alpha Series Bedienungsanleitung

Swann

Swann DVR8-1425 Bedienungsanleitung

Swann

Swann SW347-WAK Bedienungsanleitung

Swann

Swann SW344-DPS Bedienungsanleitung

Swann

Swann One Outdoor Siren Bedienungsanleitung

Swann

Swann DVR4-8600 Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung

DSC

DSC PC 4010 Betriebsanleitung