SwiftCam G3S Benutzerhandbuch
STARTUP GUIDE
3-axis handheld stabilizer for GoPro
*Compatible with Hero 3, Hero 3+ & Hero 4
winner
SAVOUR THE MOVING MOMENT
Contents
1. Overview 1
1.1. Specications 1
1.2. Package contents 2,3
2. Basics 4
2.1. Set up 4
2.1.1. Insert batteries 4
2.1.2. Mount GoPro 4
2.1.3. Put on balancing weight 4
2.1.4. Normal Calibration 5
2.1.5. Switch on the gimbal 6
2.2. Switch shooting modes 6
2.3. Power indicator & shooting mode indicator 7
2.4. Operating angles 7
2.5. Vibration 7
3. Free rmware upgrade through PC 8
4. Advance Calibration 9,10
5. Q&A 11
6. Warranty information 12
6.1. How to obtain warranty service 12
6.2. Limitations and exclusions 12
1.1.Specications
Handheld Gimbal
3-axis handheld stabilizer for GoPro
1. Overview
P.1
Name G3s
Model SC-HG-G3S
Operating Angles Pan axis: 360
Pitch axis: 0 - 270
Roll axis: +/- 50
Weight
(Battery Included)
374g
Battery Type AAA alkaline battery 1.5V x 4 - LR03 / UM4
AAA rechargeable battery 1.2V x 4 - HR03 / UM4
Operating Temperature -10 to 40C
Folded Dimensions 309H x 80W x 47D (mm)
Expanded Dimensions 276H x 96W x 81D (mm)
Package Weight 731g
Package Dimensions 285L x 15W x 70H (mm)
Shooting Mode
Mode \ Axis Pan axis Pitch axis Roll axis
Full Follow Mode Follow Follow Lock
Pan Follow Mode Follow Lock Lock
Full Lock Mode Lock Lock Lock
Includes:
1.G3s x1
2.U Mount x1
3.Bottom cap x1
4.Screw x1
5.Balancing weight x1
6.USB data link cable x1
7.Flannel bag x1
8.Startup guide x1
U Mount
Bottom cap
Arm
Joystick
USB cable port
Shooting mode indicator
1.2.Package contents
P.2
Screw
Magnet
Magnetic Position Locking System
The arm structure can be magnetically held
in its desirable position when unused to
ensure convenience in storage and travel.
Power button
Power indicator
Balancing weight
USB data link cable Balancing weight
Flannel bag
P.3
3-axis handheld stabilizer for GoPro
2.1.2. Mount GoPro
1. Loosen the screw.
2. Turn the arm 270 anticlockwise. The logo“G3s”is facing
the front.
3. Turn the mount anticlockwise and the screw hole is at the
bottom.
2.1.1. Insert batteries
G3s supports AAA battery power system.
Insert batteries in correct polarity and
tighten the bottom cap.
2. Basics
2.1.Set up
2.1.3. Put on balancing weight
For Hero 4, it is recommended to put on the balancing
weight for the optimized balancing point.
Simply stick on the arm as shown.
4. Put the GoPro into the mount and hold it rmly.
5. Mount a bit the hook of the U Mount to the
mortise.
6. Adjust the screw hole at the bottom and the hook.
7. Turn the GoPro clockwise and the screw hole is
facing up. Tighten the screw.
8. Turn the GoPro anticlockwise so that the screw is at
the bottom. Turn on GoPro.
P.4
45° VIEW
2
3
4 5
Normal Calibration procedure:
1. Power o G3s.
2. Push joystick upward, press and hold it in the up
position.
3. Keep holding the joystick and then press power
button once to switch on the gimbal.
4. The shooting mode indicators will blink for 2s.
Hold until both blue and green indicator lights
turn on together, then release the joystick.
5. Lay down G3s on a at surface within 10s. G3s will
power o after around 40s.
6. Gyro calibration completes.
2.1.4. Gyro Calibration
Before use, follow the below procedure to do Gyro calibration for best
performance. Gyro Calibration can also be performed whenever the following
occurs:
2
3
4
1. The GoPro holder appears slanting downward when the gimbal is held
upright.
2. The GoPro holder drifts slowly despite the gimbal is held still.
3. In the process of Factory Parameter Reset
P.5
3-axis handheld stabilizer for GoPro
2.1.5. Switch on the gimbal
1. Hold G3s in an upright position with thumb
on joystick.
2. Horizontally turn the camera facing outwards.
Hold the GoPro in a horizontal position.
3. Press the power button once and the power
indicator will light on.
4. Press the joystick for 2s to switch on.
Release the arm when it automatically
adjusts to balancing point.
Press
once
Press
for 2s
2.2.Switch shooting modes
1. Hold G3s in an upright position.
2. Press joystick once to switch shooting modes.
Mode 1: Full Follow
(Blue mode indicator light on.)
GoPro follows but smoothens
pitch (tilt up, tilt down) and
pan movements (pan left, pan right).
Mode 2: Pan Follow
(Green mode indicator light on.)
GoPro locks on tilt up/down axis but
follows and smoothens
pan movements (pan left, pan right).
Mode 3: Full Lock
(Amber mode indicator light on.)
GoPro locks on all axis including
tilting up/down and panning left/right.
Pan Follow
Full Follow Full Lock
Important note
Do not switch on when G3s is not in upright position.
Do not shake G3s.
Important note
Do not switch shooting mode when
G3s is not in upright position.
P.6
(SwiftCam G3s - How to start up?)
Watch more on YouTube:
Watch more on YouTube:
(SwiftCam G3s - How to switch the shooting modes?)
2.3. Power indicator & shooting mode indicator
2.4.Operating angles
2.5.Vibration
Vibration is the signal of improper usage.
To stop the vibration,
1. Hold G3s in upright position and press joystick for 2s.
2. The arm will get balanced automatically. Adjust the
camera angles by joystick when the arm stops.
Shooting mode indicator
Blue light on
Shooting mode: Full Follow
Green light on
Shooting mode: Pan Follow
Amber light on
Shooting mode: Full Lock
Blue light blinks
G3s is not in proper usage.
All light blink together
Low battery.
P.7
Watch more on YouTube:
(SwiftCam G3s - Proper Usage)
Power indicator
Blinks three times.
G3s is in normal operation.
Blinks rapidly.
Low battery.
3-axis handheld stabilizer for GoPro
Important note
Do not exceed the operating angles of each axis.
Important note
Do not adjust G3s by hand.
Pitch axis: 0 - 270
270°
Roll axis: +/- 50
+50° -50°
Pan axis: 360
360°
3. Free rmware upgrade through PC
1. Power o G3s. Plug the provided USB data link cable in the
USB port on G3s.Connect with a PC running on Windows 7/8.
Driver will be installed automatically.
2. When installation nishes, right click“Start Menu” and select
“Device Manager”.
3. Select “Ports (COM & LPT)”. Check the COM port number of
“Prolic USB-to-Serial Comm Port” If the COM port number is
out of 1-29, reset the COM port number.
3.1. Right click“Prolic USB-to-Serial Comm Port”.
3.2. Select“Properties”.
3.3. Select“Port Settings”.
3.4. Select“Advanced”.
3.5. Select“COM Port Number”and reset COM Port Number
(COM1-29).
4. Download the rmware package“Version 0.18 (ZIP)”from the
ocial SwiftCam website.
5. Unzip "swiftcam_g3s_rmware_v_0_18.zip".
6. Open folder "swiftcam_g3s_rmware_v_0_18".
7. Open program“swiftcam_g3s_rmware_loader_v_0_18.exe”.
8. Select the corresponding COM port number.
9. Select rmware le“swiftcam_g3s_rmware_v_0_18.bin”.
10. Click“Load and Connect”.
11. Lay down G3s on a at surface. Power on G3s to start update.
Wait until rmware update is 100% completed.
12. Click“OK” and close the loader.
13. Power o G3s and unplug the USB data link cable.
Important note
Do not stop the program or power o G3s or unplug USB data link cable until it is 100% updated.
P.8
Firmware Package
“Version 0.18 (ZIP)”
Inhaltsverzeichnis
Andere SwiftCam Kamerazubehör Handbücher
