Swingline STACK-AND-SHRED 500X Bedienungsanleitung

SHREDDERS

STACK-AND-SHRED500X&500M™

start here

démarrez ici

empieza aquí

comece aqui

min

SHREDDERS

English instruction manual 6

Francais manuel d’utilisation 14

Español manual de instrucciones 22

Português manual de instruções 30

STACK-AND-SHRED500X&500M™

6register this product online at www.accobrands.com

To guard against injury, the following basic safety precautions must be observed in the set-up of this

product.

• Ensure the machine is plugged into an easily accessible power outlet, and ensure the cable is not

likely to trip up a passer by.

• Any attempt to repair this unit by unqualied personnel will invalidate the warranty. Please return to

supplier.

• Unplug your shredder before moving it or when it is not in use for an extended period of time.

• Do NOT operate with a damaged power supply cord or plug, after it malfunctions, or after it has

been damaged in any manner.

• Do NOT overload electrical outlets beyond capacity as this can result in re or electrical shock.

• The socket-outlet should be near the equipment and should be easily accessible.

• Do NOT alter the attachment plug. The plug is congured for the appropriate electrical supply.

• Do NOT use near water.

• Do NOT use aerosol dusters or cleaners.

• Do NOT spray anything into the shredder.

• Do NOT load the auto-feed chamber with unopened junk mail, magazines, bound documents etc.

Although this shredder has been designed to comply with UL 60950-1 EN 60950-1 safety standards

including the “probe accessibility tests”, do not operate the shredder near children or pets.

autofeed technology

The Stack and Shred 500X and 500M has been designed to automatically shred up to 500 sheets

from the auto-feed chamber and up to 9/10 sheets through the manual feed slot. The auto-feed

mechanism has been designed to handle paper fastened with staples and paper clips and to only

pull a few sheets of paper into the cutting mechanism to minimise the risk of paper jams.

English

STACK-AND-SHRED 500X&500M™SHREDDERS 7

control panel and indicators

Jam Free indicator – This alerts

the user when too much paper is

fed into the manual feed slot (see

section on Jam Free Technology).

Paper Loading Door/Bin Door

Open or Bin Full indicator –

This means either:

• Loading door is open

• Bin is open

• Bin is full

Lock indicator – This means the

paper loading door is locked (during

shredding).

Oil level indicator

Oiling in Operation indicator

Paper jam indicator – This means

there is a paper jam in the auto feed

chamber.

If this symbol is ashing the

shredder is attempting to clear a

paper jam automatically.

If this symbol is permanently

illuminated red please follow the

instructions under ‘Rare Occasion

of Jamming’.

Continuous Jam Boost

Auto

Reverse

Loading Door Locking

Mechanism – PIN Password

Buttons – Enter a four digit code

to lock the loading door during

shredding.

warning symbols

Sheet capacity of manual feed

entry slot.

This means no aerosols.

This means keep children away

from shredder.

This means you should be careful

because long hair can become

entangled in the cutting head.

This means don’t reach into the

feed opening of the cutting head.

This means be careful of loose

jewellery which could become

entangeld in the cutting head.

This means no oil lubrication,

use Rexel oil sheets only.

This means be careful of ties and

other loose clothing which could

become entangled in the cutting

head.

This means the shredder can

accept small paperclips.

This means the shredder can

accept small staples.

Safety First

English

8register this product online at www.accobrands.com

Stack and Shred 500X/500M shredding capability

Stack and Shred 500X/500M CAN shred the following:

• 500 sheets

• Stapled paper, 25mm within the corner

• 26/6 and 24/6 or smaller staples

• Small sized paper loaded centrally

• 500 sheets

• Paper clip paper, 25mm within the corner (500X through manual feed slot ONLY)

• Capable of shredding small/medium paper clips (max. wire thickness = 0.9 mm)

• >80/100gsm paper (through manual feed slot ONLY)

• A3 folded in half max. 2 sheets

• 500 sheets

• 80 gsm paper

- Letter and Legal

- A3 single sheet folded in half to make A4

Stack and Shred 500X/500M CAN shred (through the manual feed slot):

Thick paper or

card.

Multiple folded

sheets (e.g. A3

sheets folded in

half).

Unopened mail

(e.g. junk mail).

Glossy paper or

a sheet covered

with print on both

sides.

Stack and Shred 500X/500M CANNOT shred the following:

Large clips.

Check the length

of the paperclip

is not longer than

32mm.

Heavy duty

staples. Check

the staple leg

length is not

greater than

6mm.

Bound

documents

Bulldog clips

Magazines or

other documents

bound by multiple

staples or clips.

Adhesive labels.

Plastic sheets,

laminated

documents,

plastic folders.

English

STACK-AND-SHRED 500X&500M™SHREDDERS 9

1. initial setup

The shredder is designed to automatically lubricate the cutting mechanism as required to ensure

the product continues to work to its maximum performance and to extend the product life. Please

follow the operation instruction before turning on the shredder for the rst time. The 60ml bottle

of oil* is sucient to allow the shredder to start for the rst time and to operate continuously for

about one hours shredding before the reservoir will need relling. When the ‘Oil Rell’ indicator is

illuminated ( ), ip up the oil reservoir cap and rell the oil reservoir using a bottle of standard

Rexel oil (1760049)*. The automatic oiling operation ( ) last approximately two seconds and

you will hear the distribution pump during this time. Auto-oiling operates after 15 minutes of

shredding time.

bin or loading door open safety function

As a safety precaution, if the bin or loading door is opened during shredding, the shredder will stop

and the bin full indicator will illuminate ( ).

intelligent help

1 In the unlikely event of the shredder jamming, the Stack and Shred 500X and 500M will stop

shredding, and the jam icon will blink in orange.

2 The shredder will illuminate the FWD ( ) and REV ( ) buttons in the sequence necessary

to clear the jam.

3If the jam cannot be intelligentally cleared, the jam icon ( ) will illuminate in red. At this point

open the auto feed chamber to clear any jammed material.

* ACCO Brands Europe accepts no liability for product performance or safety when other types or brands of lubricants are used on

any part(s) of this machine.

automatic jam clearance

Intelligent Jam Clearance: In the unlikely event of the shredder jamming, the Stack and Shred 500X

and 500M will automatically reverse and forward the engine three times to clear a jam. During this

operation the Paper Jam indicator will ash ( ).

English

self-cleaning cutters

After emptying and replacing a full bin, the shredder will run in forward for 4 seconds, stop for

2 seconds and then reverse for 4 seconds to clear away any remaining paper from the cutter

mechanism.This unique ‘self-cleaning’ mechanism is additional jam prevention technology

from Rexel.

lubrication of the shredder

Only use oil sheets to lubricate. ACCO Brands accepts no liability for product performance or

safety when other types of lubricants are used on any part(s) of this machine. Insert the oil sheet

into the manual feed slot and NOT in the auto-feed chamber. Using an oil sheet in the auto-feed

chamber will contaminate the feed rollers preventing the auto-feed mechanism shredding. Follow

the maintenance instructions if the rollers become contaminated. Do not directly oil the shredder.

10 register this product online at www.accobrands.com

2. operation

1After unpacking the product pull out the shredder bag frame and remove the CD shard tray,

which sits on top of the bag frame. Store this tray on the product as shown and use when you

shred CDs.

2 Lift up the loading door and open oil ap.

3 Remove oil cap and ll up the reservoir using the 60ml bottle of oil provided. Replace the cap.

4Connect the shredder to mains supply.

5 Check that the on/o switch at the back of the machine is switched to the ‘ON’ position.

6 Press and hold down the Auto button ( ) for 5 seconds to start the pump and prime the

system. Only required when the product is used for the rst time.

7To load the shredder, simply lift the loading door handle to open the loading door and insert

documents. You can open the door further to 90 degrees for easier access if required Load up to

500 sheets at a time into the feed chamber.

Do not ll above the MAX level, this could damage the shredder.

8 The shredder will start the shredding cycle automatically ONLY after closing the loading door.

If there is paper in the Autofeed chamber after rst attempt, open and re-close the paper loading

door a second time.

Attention: If required you can now lock the loading door by entering a 4 digit code (see Locking

the Paper Loading Door section).

9 If you only have up to 9/10 sheets to shred, you can use the manual feed slot, provided the auto

feed chamber is empty.

10 Insert paper to be shredded into the feed area.The shredder will detect the paper and start

automatically.

11 If the shredder is left in auto mode for more than 2 minutes without being used, the shredder will

automatically turn back to sleep mode in order to save power.

12 The shredder will automatically ‘wake up’ from sleep mode when paper is inserted into the

shred mouth or you open the loading door. There is no need to press the Auto button ( ).

3. reverse function

1Should you wish to reverse paper out whilst shredding, a reverse button ( ) has been tted for

your convenience.

2 Reverse the paper out then turn the machine o using the ON/OFF switch at the rear of the

shredder. Remove the paper from the manual feed slot (if being used) or open the loading door,

remove the remaining stack of paper, then pull the jammed paper free of the cutting mechanism.

3 To resume shredding, turn the shredder on using the ON/OFF switch at the rear of the shredder.

Return the switch to the auto position ( ).

English

Andere Handbücher für STACK-AND-SHRED 500X

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Swingline Aktenvernichter Handbücher

Swingline

Swingline DS22-13 Bedienungsanleitung

Swingline

Swingline CM15-30 Bedienungsanleitung

Swingline

Swingline STACK-AND-SHRED200X&200XL 60X Bedienungsanleitung

Swingline

Swingline Stack-and-Shred 250X60x Bedienungsanleitung

Swingline

Swingline EX10-06 Bedienungsanleitung

Swingline

Swingline STACK-AND-SHRED 300X Bedienungsanleitung

Swingline

Swingline EX10-05 Bedienungsanleitung

Swingline

Swingline Stack-and-Shred Bedienungsanleitung

Swingline

Swingline Stack-and-Shred 175X Bedienungsanleitung

Swingline

Swingline Stack-and-Shred 230X Bedienungsanleitung

Swingline

Swingline LS32-30 Bedienungsanleitung

Swingline

Swingline Stack-and Shred 100M Bedienungsanleitung

Swingline

Swingline Style+ Bedienungsanleitung

Swingline

Swingline Stack-and-Shred 80X Bedienungsanleitung

Swingline

Swingline Stack-and-Shred 750X Bedienungsanleitung

Swingline

Swingline Stack-and-Shred 80X Bedienungsanleitung

Swingline

Swingline EX10-05 Bedienungsanleitung

Swingline

Swingline DS22-13 Bedienungsanleitung

Swingline

Swingline STACK-AND-SHRED750X Bedienungsanleitung

Swingline

Swingline Stack-and-Shred 250X Bedienungsanleitung

Swingline

Swingline EX12-05 Bedienungsanleitung

Swingline

Swingline STACK-AND-SHRED 230XL Bedienungsanleitung

Swingline

Swingline Stack-and-Shred 250X Bedienungsanleitung

Swingline

Swingline STACK-AND-SHRED 500X Bedienungsanleitung

Beliebte Aktenvernichter Handbücher anderer Marken

GBC

GBC ShredMaster CC055 Bedienungsanleitung

UNITED OFFICE

UNITED OFFICE UAV 190 A1 Bedienungsanleitung

UNITED OFFICE

UNITED OFFICE UAV 190 A1 Bedienungsanleitung

Rexel

Rexel Optimum AutoFeed+ 45X Bedienungsanleitung

Martin Yale

Martin Yale 227284S1 Bedienungsanleitung

Bonsaii

Bonsaii DocShred C223-A Bedienungsanleitung

HSM

HSM Pure 740 max Bedienungsanleitung

TRU RED

TRU RED TR-BMC20A Bedienungsanleitung

Fellowes

Fellowes 50S Bedienungsanleitung

GBC

GBC SHREDMASTER 1236SE Bedienungsanleitung

Gude

Gude GH 2600 P Bedienungsanleitung

Ativa

Ativa DQ80M Bedienungsanleitung

Q-Connect

Q-Connect Q8CC Bedienungsanleitung

Fellowes

Fellowes POWERSHRED C-325CI Bedienungsanleitung

Olivetti

Olivetti Privacy 5000C Kurzanleitung

UNITED OFFICE

UNITED OFFICE UAV 190 A1 Bedienungsanleitung

Dahle

Dahle paperSAFE 22022 Bedienungsanleitung

Formax

Formax OnSite FD 87 Bedienungsanleitung