General Operating Information
Before First Use
1. Remove all packaging materials.
2. Remove any stickers or labels from the appliance except the rating plate.
3. Clean the basket and frying tray thoroughly with warm water, some washing-up liquid and a non-abrasive
sponge. Note: These parts can also be cleaned in the dishwasher.
4. Wipe the inside and outside of the appliance with a damp cloth.
Preparing for Use
1. Place the appliance on a flat, stable, heat resistant work surface and away from water.
2. Place the basket in the frying tray correctly.
3. Do not fill the frying pan with oil or any other liquid.
4. Do not place anything on the appliance. This disrupts the airflow and affects the hot air baking result.
Using the Appliance
1. Power on
- Connect the power cord to a wall outlet. It beeps and lights up for 1 second and then it goes into standby
mode. All function lights turn off except the power button.
2. Menu Selection, Temperature, Time
- After the power is connected, it will be in standby mode. Press the On/Off button. The default temperature
and time of the program are 180°C and 15 minutes respectively. At this point the time and temperature can be
adjusted using the "Time + / -" and "Temperature + / -" buttons.
- You can also press a pre-set program button to cook different types of food. When you press the pre-set
program button, the indicator light will flash, then press the Start/Pause button to start working. Each pre-set
program has its own default time and temperature (as shown in Table 1: Menu table). The time and
temperature can be adjusted using the "Time + / -" and "Temperature + / -" buttons.
(1) The set temperature range is 50 - 200°C. Each time you press the + / - button, the temperature increases
or decreases by 10°C. Pressing the "+" button at 200°C will return to 50°C and pressing the "-" button
at 50°C will return to 200°C. After the desired temperature has been selected, the temperature indicator
will flash 3 times (it will stop flashing during operation) to indicate that the temperature has been set;
(2) The setting time range is 1 - 60 minutes. Each time you press the + / - button, the time will increase or
decrease by 1 minute. If you press the "+" button after 60 minutes, you will go back to 1 minute, and if
you press the "-" button after 1 minute, you will go back to 60 minutes. After choosing the desired timer,
the timer indicator will flash 3 times (it will stop flashing during operation) to indicate that the timer
has been set.
3. On / Off, Start / Pause
- After you have done all the settings, press the Start / Pause button. It will start flashing and the airfryer will
start working after a beep. During use, press the Start / Pause button followed by a beep. The airfryer stops
working and the Start / Pause button stops flashing: During use, press the on / off button followed by a beep.
The air fryer stops working and returns to standby mode.
- Note:
(1) During the cooking process, the air fryer stops working when the frying pan is pulled out to check the
cooking result or to add more food. Push the baking tray back into the air fryer to continue cooking.
(2) If the power is interrupted or the plug is removed from the socket during use, the air fryer will stop
working and all lights will go out. It will continue to work on the program when the power is on or
reconnected.
(3) During operation, the frying indicator light flashes one by one, which means the heating element is
working. When the temperature reaches the set temperature, the heating element will stop working and
the frying indicator lights will stop flashing.
