Switel DF1101 Bedienungsanleitung

Cordless DECT/GAP telephone

Operating Instructions

DF1101

Safety Information

1 Safety Information

Please read this operating instruction manual thoroughly.

Intended use

The telephone is suitable for telephoning within a public telephone network system. Any other use is

considered unintended use. Unauthorised modification or reconstruction is not permitted. Under no

circumstances open the device or complete any repair work yourself.

Installation location

Prevent excessive exposure to smoke, dust, vibration, chemicals, moisture, heat and direct sunlight.

Do not use the handset in potentially explosive areas.

Power adapter plug

Attention: Only use the power adapter plug supplied because other power supplies could damage

the telephone. Ensure access to the power adapter plug is not obstructed by furniture or such.

Rechargeable batteries

Attention: Never throw batteries into a fire. Only use batteries of the same type. Pay attention to

correct polarity. Incorrect polarity of the batteries represents a risk of explosion during charging.

Power failure

The telephone cannot be used to make calls in the event of a power failure. Always keep a wired telephone

which operates without an external power supply available in case of emergency situations.

Medical equipment

Attention: Never use the telephone in the vicinity of medical equipment. Effects on such equipment

cannot be fully ruled out.

DECT1telephones can cause an unpleasant humming sound in hearing aids.

Disposal

In order to dispose of your device, take it to a collection point provided by your local public waste

authorities (e.g. recycling centre). The adjacent symbol indicates that the device must not be

disposed of in normal domestic waste! According to laws on the disposal of electronic and electrical

devices, owners are obliged to dispose of old electronic and electrical devices in a separate waste

container.

Batteries must be disposed of at the point of sale or at the appropriate

collection points provided by the public waste authorities.

Packaging materials must be disposed of according to local regulations.

2 Preparing the Telephone

Safety information

Attention: It is essential to read the Safety Information in Chapter 1 before starting up.

1DECT: Digital Enhanced Cordless Telecommunication = Standard for cordless telephones.

Preparing the Telephone

Checking the package contents

The package contains:

Content Model DF110x

1101 110221103211042

Base station with power adapter plug 1111

Charging station with power adapter plug − 1 2 3

Handset 1 2 3 4

Telephone connection line 1111

Batteries 2 4 6 8

Operating instructions 1111

Connecting the base station

Attention: Position the base station at least 1 m away from other electronic devices, otherwise there

is a risk of mutual disturbance.

Connect the base station as illustrated in the diagram. For reasons of safety, only use the power adapter plug

and telephone connection line supplied.

Mains power outlet

Telephone line socket

For the base station, use the power adapter plug labelled with No. SW−075030EU and output data 7.5

V DC, 300mA.

Your phone’s base station is supplied with an energy−efficient switching power supply SW−075030EU

(Input 100~240 VAC, Output 7.5 VDC, 300 mA). The adaptor input power without load is approx. 0.2

W. The average efficiency is approx. 67 %.

The electrical consumption of the base is:

− in operation mode (idle/call): approx. 1.8 W

− during charging of the handset: approx. 2.7 W

The charger(s) delivered with a telephone set is/are supplied with an energy−efficient switching power

supply SW−075020EU (Input 100~240 VAC, Output 7.5 VDC, 150 mA). The adaptor input power

without load is approx. 0.2 W.

The average efficiency is approx. 66 %.

The electrical consumption of the charger is:

− without handset charging: approx. 0.2 W

− during charging of the handset: approx. 1.2 W

Inserting the batteries

Insert the batteries in the open battery compartment. Only use

batteries of the type AAA NiMH 1.2 V. Pay attention to correct

polarity. Close the battery compartment.

2Visit www.switel.com to find out whether the telephone/telephone set is already available.

Preparing the Telephone

Charging the batteries

Before the handset is used for the first time, insert it in the base/charging station for at least 24 hours.

When the handset is inserted in the base/charging station properly, you will hear an acoustic confirmation

signal and the charge control lamp lights up. The handset warms up during the charging process. This is

normal and does not represent a risk. Do not charge the handset with charging units from other

manufacturers.

The current battery charge status is indicated in the display:

Full Half empty Low Empty

Setting the display language

Select a language (cf. "Menu Structure"):

Menü > Einstellungen > Mobilteil−Einst. > Sprache >... ( Menu > Settings > Set Handset > Language >...)

Setting the time and date on the handset

The time and date are set via the menu. Refer to Page 13 for the sequence of menu option selections.

Automatic answering

If this function is activated, an incoming call is taken when the handset is removed from the base station. This

function can be activated or deactivated via the menu. Refer to Page 14 for the sequence of menu option

selections.

Private branch exchanges

The information on Page 15 explains how to install your telephone in a private branch exchange.

Low−radiation (ECO mode) (single pack only)

When the handset is in the base station, the level of radiation is considerably lower than that

of standard DECT cordless telephones when in Standby mode. In talk mode, radiation is reduced

(depending on the distance between the handset and base station).

Default setting = ECO Mode →Off

The telephone can be set up so that the radiation frequency is reduced; Page 14.

If necessary, you can increase the range of the telephone system by switching ECO mode off;

Page 14 (ECO Mode →Off).

Operating Elements

3 Operating Elements

The buttons in this operating manual are subsequently depicted with a uniform contour. Therefore, slight

deviations in the appearance of the symbols on the telephone buttons compared to those depicted here are

possible.

Handset

1 Loudspeaker

2 LC display

3 Up / Redial / Pause button

4 Softkey, right

5 On−hook button / Standby mode

6 Digit keys

7 # button

Key lock

Upper / lower case

8 Internal call

9 Microphone

10 R−button

11 * button

12 Down / Phone book button

13 Call button / handsfree

14 Softkey, left

15 Handset On / Off

Base station

16 Charging contact

17 Paging button

18 Mood light

To turn the mood light on / off

5 sec. PMood light on / off

4 Preliminary Information

This chapter provides basic information on using the operating instruction manual and the telephone.

Description of operating sequences in the manual

Display Description

1Displays the contour of buttons

*Press the button depicted briefly

3 sec. #Press the button depicted for 3 seconds

Enter digits or letters

{}Handset rings

Remove the handset from the base station

Place the handset in the base station

Preliminary Information

Texts which appear in the display

Names Press the softkey

Icons and texts in the handset display

Icon Description

On: Indicates the battery charge status.

Flashing: The batteries must be charged.

Run−through segments: The batteries are being charged Page 4.

Menu Displays the main menu Page 11.

Names Displays the phone book Page 7.

New calls have been registered in the call log. Page 8.

New SMS messages have been recorded Page 14.

The key lock function is activated; Page 11.

The ringing tone has been switched off Page 14.

The handsfree facility is activated; Page 11.

On: The alarm function is on Page 13.

Flashing: The alarm clock is ringing Page 13.

Secrecy On The microphone is deactivated (muted); Page 11.

On: The connection to the base station is good.

Flashing: The connection to the base station is interrupted. Move nearer to the base station.

Standby mode

All descriptions in this operating manual assume that the handset is in Standby mode which is the case when

you are not talking on the phone and if a menu is not open. Press the +button (red), as necessary, to enable

the Standby mode.

Energy−save mode

When the handset has been in Standby mode for some time, it automatically switches to energy−save mode.

The buttons and display no longer light up.

Navigating in the menu

All the functions can be accessed via the various menus. Refer to the Menu Structure Page 11 for

information on how to access each respective function.

-(left) Displays the main menu

(/ )Selects a submenu

-(left) Displays the submenu

(/ )Selects a function

-(left) Runs the function

(/ )Selects a setting

Use the keypad to enter figures or letters as necessary

-(left) Confirms your input

-(right) One level back / deletes one character

+(red) Aborts all programming and saving and returns the handset to

Standby mode

Phone Book

Every process is automatically cancelled if there is no input within 15 seconds.

Creating phone book entries − example

The way in which to navigate through the menus and select settings is explained by means of the example

Creating phone book entries. Proceed as in this example for all the settings.

Names Open the phone book

(/ )Add Entry , Select Select menu and confirm

, OK Enter the name (max. 12 characters) and confirm it

, Save Enter the number (max. 24digits) and confirm it

(/ ), Select Select the melody and confirm it

+(red) Quit saving and return to Standby mode

5 Phone Book

You can use the phone book to store up to 100 phone numbers together with the associated names.

Always enter the area access code with the phone numbers so that incoming local calls can also be

assigned to a phone book entry.

When the memory capacity is used up, the message PhonebookMemory Full ! appears when an

attempt is made to store another number. To create space, an existing entry must first be deleted.

The phone book entries are arranged alphabetically. To access the required phone book entry

directly, press the first letters of the corresponding name.

Entering names

Letters are also imprinted on the digit keys. Letters, digits and special characters are entered by pressing the

relevant key the respective number of times.

0Enter a space

Clear Delete

(/ )Move the cursor

To enter the same letter twice, press the button to enter the letter. Wait until the cursor skips one

position forward. Enter the letter again.

Creating phone book entries

Refer to the example; Page 6.

Editing phone book entries

)Open the phone book

(/ )Select an entry

Options Open the menu

(/ )Edit Entry , Select Select the submenu and confirm it

, OK Change the name and confirm it

, Save Change the number and confirm it

(/ ), Select Change the group and confirm it

Deleting phone book entries

Deleting an entry

)Open the phone book

(/ )Select an entry

Calls List

Options Open the menu

(/ )Delete Entry , Select Select the submenu and confirm it

Delete? , Yes or No Confirm or cancel deleting

Deleting all entries

Names Open the phone book

(/ )Delete Phonebook , Select

Select menu and confirm

DeleteAll Entries ? ,Yes or No Confirm or cancel deleting

Exchanging the phone book

In order to exchange the phone book, several DF110x handsets or handsets from the same series

(HS1, HS2, ...) need to be registered to the base station.

HS1: Names Open the phone book

(/ )Copy Phonebook , Select

Select menu and confirm

(/ )Select handset (destination)

Select Initiate the copy process

HS2: CopyPhonebook? , Yes or No

Start or reject copying

HS1 and HS2: EntriesCopied Transfer complete

6 Calls List

A total of 30 phone numbers are stored in a calls list.

The caller number display (CLIP1) is a supplementary service offered by your telephone network

provider. The caller’s number appears in the display if the service is offered by your telephone network

provider. Contact your network provider for further information.

Displaying numbers in the calls list

Menu Open the main menu

(/ )Calls Lists , Select Displays the calls lists

(/ )Missed Calls , Received Calls or Dialled Calls , Select

Open the calls list required

(/ )Browse the calls list

Saving a phone number from the calls list to the phone book

A phone number in the calls list can be stored in the phone book directly.

Display the calls list you want and select an entry, see above.

Options Open the menu

(/ )Save Number , Select Select menu and confirm

, OK Enter the name (max. 12 characters) and confirm it

, Save Change the phone number as necessary (max. 24 digits) and confirm

1CLIP: Calling Line Identification Presentation = Displays the caller’s phone number.

Telephoning

(/ ), Select Select the melody and confirm it

As soon as the phone number in the phone book has been saved together with a name, the name

entered appears in the calls list.

Deleting individual phone numbers

Display the calls list you want and select an entry, see above.

Options Open the menu

(/ )Delete Call , Select Choose to delete and confirm

Deleting all phone numbers

Menu Open the main menu

(/ )Calls Lists , Select Displays the calls lists

(/ )Delete Calls , Select Select menu and confirm

(/ ), Select Select calls list and confirm

DeleteAll Calls ? , Yes or No Confirm or cancel deleting

7 Telephoning

Taking a call

+(green) or Take the call

Ending a call

+(red) or End the call

Making a call

Enter the phone number (max. 32 digits)

Clear Delete the last digit if incorrect

+(green) Dial the phone number

Redialling

The telephone stores the last 20 numbers dialled in a redialling list.

(, (/ )Display the redialling list and select an entry

+(green) Connect

Editing phone numbers in the redialling list is identical to editing phone numbers in the calls list; (Chapter

6).

Calling back calls received

The telephone stores the numbers of the last 30 calls received in a call log.

Menu Open the main menu

(/ )Calls Lists , Select Displays the calls lists

(/ )Missed Calls or Received Calls , Select

Open the calls list required

(/ )Select an entry

+(green) Connect

Dialling numbers from the phone book

Phone numbers must have been stored in the phone book for this function;Page 7.

Telephoning

), (/ )Open the phone book and select an entry

+(green) Connect

Internal calls1

Making internal calls

There must be two or more handsets (HS1, HS2, ...) registered on your base station in order to make internal

calls free of charge.

HS1: I, e.g. 2, OK Dial the internal call number of the handset required

HS2: +(green) Take the internal call on the other handset

HS1 / HS2: +(red) End the internal call

Forwarding external calls internally

HS1: I, e.g. 2, OK Dial the internal call number during the conversation with the external

caller

HS2: +(green) Take the internal call on the other handset

HS1: +(red) Forward the call

If the handset called does not answer, take the external call back by pressing softkey End.

Holding a call / brokering

While a call is in progress, it is possible to dial another handset in order to consult with someone. The external

caller is put on hold while you converse with the second, internal person called. You can repeat this procedure

as often as required.

HS1: I, e.g. 2, OK Dial the internal call number during the conversation with the external

caller

HS2: +(green) Take the internal call on the other handset

HS1: ISwitch between the callers

Making conference calls

An external call can be transferred to another internal handset for a conference call.

HS1: I, e.g. 2, OK Dial the internal call number during the conversation with the external

caller

HS2: +(green) Take the internal call on the other handset

HS1: Join Start the conference

HS1 / HS2: +(red) End the conference

Setting the receiver volume

The volume can be adjusted to one of 8 settings during a call.

(/ )Set a volume

Displaying the duration of a call

The duration of the call you are making is shown on the display.

1Internal calls are only possible when at least two handsets are registered in the system Checking the

contents of the package" on Page 3.

Inhaltsverzeichnis

Andere switel Schnurloses Telefon Handbücher

switel

switel DC 44 Bedienungsanleitung

switel

switel CD7738 Bedienungsanleitung

switel

switel DET077 series Bedienungsanleitung

switel

switel DC41 Series Bedienungsanleitung

switel

switel D7210 Bedienungsanleitung

switel

switel D7000 Vita Plus Bedienungsanleitung

switel

switel DE14 Bedienungsanleitung

switel

switel DET 10371 Bedienungsanleitung

switel

switel DC68x Bedienungsanleitung

switel

switel DE341 Technisches Handbuch

switel

switel DET1174 Bedienungsanleitung

switel

switel BC-207 Bedienungsanleitung

switel

switel DE201 Bedienungsanleitung

switel

switel D6005 Bedienungsanleitung

switel

switel DC 58 Series Bedienungsanleitung

switel

switel DET157 Series Bedienungsanleitung

switel

switel DE34 Series Bedienungsanleitung

switel

switel DFT7072 Bedienungsanleitung

switel

switel DC651 Bedienungsanleitung

switel

switel DE38 Series Bedienungsanleitung

switel

switel DF73X Bedienungsanleitung

switel

switel DF 87 series Bedienungsanleitung

switel

switel DCT 707X Bedienungsanleitung

switel

switel DE122 Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung

switel DF1101 Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken