Sycreader W91 Bedienungsanleitung
W91
Instructions
Description of the structure
①Scan the window
①OLED display
①Scan key / back key
①Page it up
①Page down / enter
①power supply
①Read key / confirmation key
①Type-c interface
①Wireless receiver
①Battery compartment
Product overview
The animal tag reader is an RFID wireless reader that supports electronic tags in EMID, FDX-B
(ISO1784/85) and conventional barcode/two-dimensional code scanning formats. The product
uses a high-brightness OLED display, which can be clearly displayed in indoor and outdoor strong
light conditions. With its own storage function, it can store up to 6000 tags, which can be uploaded
to the computer via USB data cable, wireless, and Bluetooth.
The product performance is stable, the operation is simple, and it is suitable for small animal
management, traceability management, warehousing inventory, and material management.
PROJECT
PARAMETER
MODEL
W91
WORKING FREQUENCY
134.2Khz/125Khz
LABEL FORMAT
EMID、FDX-B(ISO11784/85)
READING DISTANCE
2 to12mm glass tube label >15cm
30mm animal ear tags >25cm(related to label performance).
STANDARD
ISO11784/85
READING TIME
＜100ms
SCAN MODE
CMOS
SUPPORT CODE SYSTEM
1D: EAN13, EAN 8, UPC-A, UPC-E0, UPC-E1, Code128, Code39,
Code93, Interleaved 2 of 5, Industrial 25, Matrix 2 of 5, Code11,
CodeBar, MSI, RSS-14, RSS- Ltd, RSS- Exp, Standard 2 of 5, Plessey,
ChinaPost 25, GS1 Composite
2D: QR Code, Data Matrix (DM), PDF417, Han Xin, Micro PDF417,
Micro QRCode, MaxiCode, Aztec Code, Code16K
SIGNAL INDICATION
128 x 64 high-brightness OLED screen, buzzer
POWER SUPPLY
3.7V (rechargeable lithium battery).
STORAGE CAPACITY
6000 messages
CONNECTION METHOD
USB2.0, Wireless HID (optional), Bluetooth (optional).
LANGUAGE
English (can be customized according to customer requirements)
OPERATING TEMPERATURE
-10℃~50℃
STORAGE TEMPERATURE
-30℃~70℃
PACKAGE SIZE
267mm×148mm×38mm
WEIGHT
500g
Instructions for operation
1. Click the button to turn on, and the startup interface will be
displayed on the screen after self-checking:
2. Press the "SCAN" button to enter the scan code mode, and then
press "SACN" button to start scanning, the screen displays the
scanning result:
3. Press the "READER" button to enter the card reading mode. When
the screen displays "((((((0)))))", move the machine close to the card.
After the reading is successful, the card number will be displayed on
the screen, and the label type card number will be displayed above
the label; if the label reading is unsuccessful, Will show "No Tag"
4. Press ◄ or ► on the startup interface to enter the setting
interface, then press ◄ or ► to move the cursor, select the item to
be set, press the "READER" button to confirm, and press the "SCAN"
button to return
5. Card reading mode settings
After entering the setting interface, select "Reader Mode" and press
the "READER" button to enter. There are three card reading modes,
namely key trigger/read once/continuous. After selecting the mode
to be set, press the read/write key to confirm, and the
corresponding mode is displayed [Y]
6. Data query
Select “Data Query” in the setting interface, press "READER" button
to enter, you can view the recorded data, including data number, data
type, data content, press ◄ or ► to switch
7. Storage method
Select "Storage Mode" in the setting interface, and press the
“READER” button to switch the mode switch. When [Y] is displayed
in the back, the storage mode is turned on, and the scanned data
will be stored in the device memory; when [N] is displayed in the
back, the storage mode is closed and the scanned data will not be
saved
8. Transfer method
Select "Transfer Mode" in the setting interface, and press the
“READER” button to enter the setting. There are three transmission
modes, 2.4G wireless/Bluetooth/USB port. [+] means it is turned on,
and the data will be transferred to the connected device; [-] means
closed, data will not be transmitted through this connection, press
the READER key to switch the switch
9. Data upload
Select "Data Upload" in the setting interface and press the “READER”
button to upload the data stored on the device to the connected
external device. After the upload is successful, the screen displays
"Upload OK!"
10. Data deletion
Select "Data Delete" in the setting interface and press the “READER”
button to delete the data stored on the device. After the deletion is
completed, the screen displays "Delete OK!"
11. Wireless matching
When the wireless receiver is unsuccessful or needs to be paired
again, select "wireless match" in the setting interface, press the
“READER” button to enter the pairing, "Pls Plug Dongle!" appears on
the screen, plug the wireless receiver into the USB port and wait 2
seconds, when "Dongle pair OK!" appears on the screen, it means the
pairing is successful
12. Language setting
Select "Language Set" in the setting interface, press the READER key
to enter the language setting,
Press ◄ or ► to switch language, press “SCAN” button to return
13. Buzzer settings
Select "Buzzer Sound" in the setting interface, press the “READER”
button to switch the sound switch, [Y] means on, [N] means off
14. Bluetooth settings
Select "Bluetooth" in the setting interface and press the “READER”
button to enter the Bluetooth settings. There are three transmission
methods: HID transmission, SPP transmission, and BLE transmission.
Press ◄ or ► to switch, press “READER” button to select
15. Sleeping time
Select "Sleep Time" in the setting interface, press the “READER”
button to enter the setting, press ◄ or ► to switch the time, press
the “READER” button to confirm after selection, the screen displays
"Setup OK!" Indicating that the setting is successful
16. Clock setting
Select "Clock Setting" in the setting interface, press the “READER”
button to enter the setting, press ◄ or ► to adjust, press the
“READER” button to confirm after the setting is completed, the
screen displays "Setup OK!" Indicating that the setting is successful
17. Reset
Select " Factory Reset " in the setting interface, press the “READER”
button to confirm the reset
18. View version information
Select "version information" in the setting interface, press “READER”
button to view the device version information, "SW version"
represents the software version; "HW Version" represents the
hardware version
Inhaltsverzeichnis
Andere Sycreader Kartenleser Handbücher
Beliebte Kartenleser Handbücher anderer Marken
Rosslare
Rosslare DR-6255 Bedienungsanleitung
Lindy
Lindy 51541 Bedienungsanleitung
Diapro T?bbi Ürünler
Diapro T?bbi Ürünler Across System Bedienungsanleitung
Johnson Controls
Johnson Controls Kantech tyco ioSmart Bedienungsanleitung
ACS
ACS ACR122L Bedienungsanleitung
Secukey
Secukey S2-MF Bedienungsanleitung
