Symbol 2840 Series Technisches Dokument

Supported Equipment Manual

for the 2840 device manufactured by Symbol Technologies

prior written permission of Connect Inc., 7125 Janes Avenue, Suite 100, Woodridge, IL 60517.

Connect, Inc. makes no representation or warranties with respect to the contents of this

document and specifically disclaims any implied warranties of merchantability or fitness

for any particular purpose. Further, Connect, Inc. reserves the right to revise this

publication and to make changes to it from time to time without obligation to notify any

person or organization of such revision or changes.

Trademarks

PowerNet IX™, PowerNet for Windows™, PowerNet AirLinc™, PowerNet Twin

Client™, PowerNet OpenAir™, PowerNet Enterprise™, and PowerNet Vision™ are

trademarks of Connect, Inc.

Other product names mentioned in this manual may be trademarks or registered

trademarks of their respective companies and are hereby acknowledged.

Production

This manual was written, edited, and produced by

Connect, Inc.

7125 Janes Avenue, Suite 100

Woodridge, IL 60517

www.connectrf.com

Printed in the U.S.A.

Supported Equipment Manual

•

March, 2003 iii

Table of Contents

Chapter 1 • Introduction.............................................................................................1-1

2840 Description………….......................................................................................... 1-1

2840 Picture……………….. ........................................................................................ 1-1

Requirements……………… ....................................................................................... 1-2

Setup Requirements ........................................................................................ 1-2

Accessories...................................................................................................... 1-2

Synchronization Tools...................................................................................... 1-2

Chapter 2 • Terminal Setup........................................................................................2-1

Downloading from the WEB...................................................................................... 2-1

Running Setup from a Download File ...................................................................... 2-1

Installation…………………......................................................................................... 2-2

Running the Manager……......................................................................................... 2-7

Quick Start…………………......................................................................................... 2-8

Configuring the Manager.................................................................................. 2-8

Cold Booting the Terminal.............................................................................. 2-15

Configuring the 2840 Terminal for Download ................................................. 2-16

Starting a Telnet Session ............................................................................... 2-17

Standard Setup…………… ...................................................................................... 2-17

Setup Using Twin Client Manager.................................................................. 2-17

Importing Custom Configurations................................................................... 2-24

Terminal Setup Using Twin Client Menus....................................................... 2-24

Authorizing PowerNet..................................................................................... 2-26

Software Management…… ..................................................................................... 2-29

Auto-Configuration ......................................................................................... 2-29

AirLoad Configuration .................................................................................... 2-34

Sending Program and Configuration Files to the Terminal............................. 2-34

Chapter 3 • Keypad Configuration ............................................................................3-1

Keypad Figures…………… ........................................................................................ 3-1

Keypad Table……………… ...................................................................................... 3-10

Chapter 4 • Error Message Resolution Guide ..........................................................4-1

Supported Equipment Manual

•

March, 2003

1-1

Chapter 1 • Introduction

2840 Description

The features of the PPT 2800 Series include real-time wireless communication options,

extensive Internet browsing capabilities, WLAN or WWAN communication, and a high

resolution 1/4 VGA display. The PPT 2800 Series offers fully integrated bar code

scanning and Pocket PC functionality. Its rigorous drop, sealing and temperature

specifications meet the needs of many industrial environments. The PPT 2800 also

features conveniently-placed scan triggers and an ergonomic design.

The PPT 2800 Series runs at 206 MHz, has 32 MB RAM and 32 MB ROM and uses the

Intel®StrongARM SA 1110 processor. It provides the standard PIM software and

synchronization capabilities of the Pocket PC platform, compatible with 32-bit

application development tools from Microsoft and third parties. An application-

programming interface (API) makes it easy to integrate bar code data capture and

wireless communication into new or existing applications. To learn more about the PPT

2800 Series, visit www.symbol.com/mobile.

2840 Picture

Introduction

Supported Equipment Manual •March, 2003

1-2

Requirements

Setup Requirements

Installation of PowerNet Twin Client requires, at a minimum, the following:

•=A Pentium-class processor

•=32 MB of RAM

•=10 MB of free hard disk space available

•=Microsoft Windows CE operating system

ActiveSync needs to be installed on the PC before downloading files to the terminal.

For instructions, go to www.MSDN.Microsoft.com.

Accessories

In addition to a Lithium Ion battery, accessories for the 2840 terminal include:

•=Synchronization Charging Cable synchronizes the PPT 2800 with a desktop

computer, and can also be used to charge the terminal using an external power

supply.

•=Single-Slot Charging Cradle (CRD 2700-1000S) can be used to charge the

terminal.

•=4-Slot Charging Cradle (CHX 2700-4000C) can also be used to charge the

terminal.

•=4-Slot Ethernet Cradle (CRD 2700-4000E) charges the PPT 2800 and

synchronizes the terminal with a desktop computer.

•=Vehicle Cradle (VCD X700-R000) powers the terminal and charges its battery,

and can be used to communicate with other devices such as printers.

•=Snap-On Modem Module (MDM 3003) allows dial-up connections of the PPT

2800 terminal to a remote host computer, while maintaining the portability of the

terminal.

•=Auto Charging Adapter (VCA 3000) connects to the cigarette lighter in a vehicle

to charge the terminal.

•=Trigger Handle (TRG 3000) adds a trigger in scanning gun form to the PPT

2800, increasing comfort when using the terminal in scan-intensive applications

for extended periods of time.

•=Magstripe Reader Attachment (MSR 3006) snaps on to the PPT 2800 to add

magstripe capabilities.

Synchronization Tools

Pocket PC devices require at least version 3.1 of ActiveSync for desktop synchronization

and communication. ActiveSync 3.1 is freely downloadable from the Microsoft web

site, at www.microsoft.com/pocketpc/downloads/activesync.asp.

Supported Equipment Manual

•

March, 2003

2-1

Chapter 2 • Terminal Setup

Downloading from the WEB

The PowerNet Twin Client software package can be downloaded from the Connect web

site at http://www.connectrf.com. Click on Partner Services and then click on Software

Downloads. Select the file named PowerNet Twin Client for Symbol.

Running Setup from a Download File

The downloaded file is a compressed archive. After extraction using a utility such as

WinZip or PKWARE, folders are created on the hard disk as shown in the following

figure.

Click on the Disk1 folder to view the files as shown in the following figure.

Terminal Setup

Supported Equipment Manual •March, 2003

2-2

Click on the Setup application and proceed to the following section entitled Installation

for further instructions.

Installation

The InstallShield wizard runs and presents the following screen.

Click on Next to begin the installation process.

Installation

Supported Equipment Manual

•

March, 2003

2-3

To change the default Destination Location, click on Browse and select a location. Then

click on Next.

The default folder is PowerNet. This default may be changed either by selecting an

existing program group or by typing in a new name at the prompt. Then click on Next.

Terminal Setup

Supported Equipment Manual •March, 2003

2-4

When the installation is complete, reboot the system to initialize the Twin Client

software.

a. To reboot the system immediately, click on Finish.

b. To reboot later, click on the option to restart the computer later, and click on

Finish.

To run the Twin Client Configuration Wizard, click on Start, Programs, PowerNet, and

Twin Client Manager. From the File menu, choose Wizard, as shown below.

The Twin Client Configuration Wizard runs and presents the following screen.

Inhaltsverzeichnis

Andere Symbol Touch-Terminal Handbücher

Symbol

Symbol PPT 8800 Bedienungsanleitung

Symbol

Symbol PPT 4300 Series Bedienungsanleitung

Symbol

Symbol PPT 2800 Series Bedienungsanleitung

Symbol

Symbol PDT 1100 Bedienungsanleitung

Symbol

Symbol MC9090 Betriebsanleitung

Symbol

Symbol VRC 5000 Bedienungsanleitung

Symbol

Symbol SPT 1700 Series Bedienungsanleitung

Symbol

Symbol PDT 7500 Series Installations- und Betriebshandbuch

Symbol

Symbol PD8500 Bedienungsanleitung

Symbol

Symbol VRC 6940 Installations- und Betriebshandbuch

Symbol

Symbol MC9190 Bedienungsanleitung

Symbol

Symbol VRC 6940 Bedienungsanleitung

Symbol

Symbol PPT 4300-S0E Bedienungsanleitung

Symbol

Symbol PPT 2700 Series Bedienungsanleitung

Symbol

Symbol MC70 Bedienungsanleitung

Symbol

Symbol PTC-960SL-III Bedienungsanleitung

Symbol

Symbol PDT8138 Bedienungsanleitung

Symbol

Symbol VRC 89XX Installations- und Betriebshandbuch

Symbol

Symbol PDT 7500 Serie Bedienungsanleitung

Symbol

Symbol MC9000-K/S Installations- und Betriebshandbuch

Symbol

Symbol PDT 7500 Series Installations- und Betriebshandbuch

Symbol

Symbol PDT 8056 Bedienungsanleitung

Symbol

Symbol SPT 1800 Series Bedienungsanleitung

Symbol

Symbol PPT 41 Series Bedienungsanleitung

Beliebte Touch-Terminal Handbücher anderer Marken

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Bedienungsanleitung

Ingenico

Ingenico AXIUM EX4000 Bedienungsanleitung

Heisei Electronics

Heisei Electronics Q-POS 815 Bedienungsanleitung

Amano

Amano MTX-15 Bedienungsanleitung

FLOWBIRD

FLOWBIRD CWT Compact Touch Bedienungsanleitung

Demco

Demco SP7 Bedienungsanleitung

Lathem

Lathem PC600 Series Bedienungsanleitung

Partner

Partner MF-2352 Bedienungsanleitung

NCR

NCR RealPOS 7460-2 Handbuch

Simrad

Simrad MS50 Montageanleitung

Unitech

Unitech MR350 MKII Kurzanleitung

Jungheinrich

Jungheinrich WMT 210 Bedienungsanleitung

Motorola

Motorola MTP850 Bedienungsanleitung

YASKAWA

YASKAWA 62H-MDC0 Bedienungsanleitung

MVG industries

MVG industries NeptuLink Bedienungsanleitung

Price Industries Limited

Price Industries Limited FDC Gebrauchsanweisung

Honeywell

Honeywell TemaKey Bedienungsanleitung

EBN

EBN BPC65-B-A16G Bedienungsanleitung