SYNC DRS-24V30W1NZ Bedienungsanleitung

TECHNICAL DATASHEET

Sync DIN Rail Power

Supply

24V 30W 1

Phase (NEC Class 2)

/ DRS-24V30W1NZ

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (January 2016, Rev. 00)

Highlights & Features

– Ultra compact size

– Full power from -10°C to +55°C operation

– Universal AC input voltage

– Up to 88.0% efficiency @ 230Vac

– Extreme low temperature cold start at -40°C

– NEC Class 2 / Limited Power Source (LPS) certified

– Overvoltage / Overcurrent / Over Temperature Protections

Safety Standards

CB Certified for worldwide use

Model Number: DRS-24V30W1NZ

Unit Weight:0.11 kg (0.24 lb)

Dimensions (L x W x D): 75 x 21 x 89.5 mm

(2.95 x 0.83 x 3.52 inch)

General Description

The ultra-compact and competitively priced Delta Sync DIN rail power supply series is designed for industrial applications requiring

highly reliable power supply within a tight space. The Sync series operates with universal AC input range and offers full power up to

55°C. The output is adjustable from 24-28 volts, and can support up to 3000 microfarads of load capacitance. A green LED indicates

output is present. All models in the series are certified according to IEC/EN/UL 60950-1 Information Technology Equipment (ITE) and

UL 508 Industrial Control Equipment (ICE). The series is also fully compliant with RoHS Directive 2011/65/EU for environmental

protection. NEC Class 2 and Limited Power Source (LPS) approvals are available for this product.

Model Information

Sync DIN Rail Power Supply

Model

Number

Input Voltage Range Rated Output

oltage

Rated Output Curr

ent

DRS-24V30W1NZ 85-264Vac (120-375Vdc) 24Vdc 1.25A

Model Numbering

DR S – 24V30W 1NZ

DIN Rail Product Series

S – Sync Series Output Voltage Output Power Single Phase NEC Class 2Without DC OK

Relay Contact

TECHNICAL DATASHEET

Sync DIN Rail Power

Supply

24V 30W 1

Phase (NEC Class 2)

/ DRS-24V30W1NZ

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (January 2016, Rev. 00)

Specifications

Input Ratings / Characteristics

Nominal Input Voltage 100-240Vac

Input Voltage Range 85-264Vac

Nominal Input Frequency 50-60Hz

Input Frequency Range 47-63Hz

DC Input Voltage Range* 120-375Vdc

Input Current < 0.55A @115Vac, < 0.35A @ 230Vac

Efficiency at 100% Load > 87.5% @ 115Vac, > 88.0% @ 230Vac

Max Power Dissipation 0% load

100% load < 0.5W @ 115Vac & 230Vac

< 4.5W @ 115Vac & 230Vac

Max Inrush Current (Cold Start) < 20A @ 115Vac, < 40A @ 230Vac

Leakage Current

(Neutral to PE terminal) < 0.5mA @ 264Vac

*Fulfills test conditions for DC input. Safety approval for DC input can be obtained upon request.

Output Ratings / Characteristics**

Nominal Output Voltage 24Vdc

Factory Set Point Tolerance 24Vdc ± 2%

Output Voltage Adjustment Range 24-28Vdc

Output Current 1.25A (30W max.)

Output Power 30W

Line Regulation < 0.5% (@ 85-264Vac, 100% load)

Load Regulation < 1.0% (@ 85-264Vac, 0-100% load)

PARD*** (20MHz) < 75mVpp @ > 0°C to 70°C

< 150mVpp @ 0°C to -20°C

Rise Time < 30ms @ nominal input (100% load)

Start-up Time < 2,500ms @ 115Vac (100% load)

< 1,000ms @ 230Vac (100% load)

Hold-up Time > 20ms @ 115Vac (100% load)

> 100ms @ 230Vac (100% load)

Dynamic Response (Overshoot & Undershoot O/P Voltage) ± 5% @ 85-264Vac input, 0-100% load

(Slew Rate: 0.1A/μS, 50% duty cycle @ 5Hz to 1KHz)

Start-up with Capacitive Loads 3,000µF Max

**For power de-rating from < -10°C to -20°C, and 55°C to 70°C, see power de-rating on page 3.

***PARD is measured with an AC coupling mode, 5cm wires, and in parallel with 0.1μF ceramic capacitor & 47μF electrolytic capacitor.

TECHNICAL DATASHEET

Sync DIN Rail Power

Supply

24V 30W 1

Phase (NEC Class 2)

/ DRS-24V30W1NZ

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (January 2016, Rev. 00)

Mechanical

Case Cover / Chassis Plastic

Dimensions (L x W x D) 75 x 21 x 89.5 mm (2.95 x 0.83 x 3.52 inch)

Unit Weight 0.11 kg (0.24 lb)

Indicator Green LED (DC OK)

Cooling System Convection

Terminal Input 3 Pins (Rated 300V/16A)

Output 2 Pins (Rated 300V/16A)

Wire Input / Output AWG 22-12 / AWG 20-12

Mounting Rail Standard TS35 DIN Rail in accordance with EN 60715

Noise (1 Meter from power supply) Sound Pressure Level (SPL) < 25dBA

Environment

Surrounding Air Temperature Operating -20°C to +70°C (Cold start at -40°C @ 40% load)

Storage -40°C to +85°C

Power De-rating -10°C to -20°C de-rate power by 2% / °C

> 55°C de-rate power by 3.33% / °C

Operating Humidity 5 to 95% RH (Non-Condensing)

Operating Altitude 0 to 2,000 Meters (6,560 ft.)

Shock Test Non-Operating IEC60068-2-27, Half Sine Wave: 50G for a duration of 11ms;

3 times per direction, 9 times in total

Operating IEC 60068-2-27, Half Sine Wave: 10G for a duration of 11ms;

1 time in X axis

Vibration Non-Operating IEC 60068-2-6, Random: 5-500Hz; 2.09Grms, 20 min per axis

for all X, Y, Z directions

Operating IEC 60068-2-6, Sine Wave: 10-500Hz; 2G peak; displacement

of 0.35mm; 1 octave per min; 60 min per axis for all X, Y, Z

directions

Pollution Degree 2

Protections

Overvoltage < 34.8V, SELV Output, Latch Mode

Overload / Overcurrent 105~160% of rated load current, Hiccup Mode,

Non-Latching (Auto-Recovery)

Over Temperature < 75°C Surrounding Air Temperature @ 100% load,

Latch Mode

Short Circuit Hiccup Mode, Non-Latching

(Auto-recovery when the fault is removed)

Internal Fuse T3.15A

Degree of Protection IP20

Protection Against Shock Class I with PE* connection

*PE: Primary Earth

TECHNICAL DATASHEET

Sync DIN Rail Power

Supply

24V 30W 1

Phase (NEC Class 2)

/ DRS-24V30W1NZ

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (January 2016, Rev. 00)

Reliability Data

MTBF Telcordia SR-332 > 700,000 hrs I/P: 115Vac & 230Vac,

O/P: 100% load, Ta: 25°C

MIL-HDBK-217F 260,000 hrs I/P: 115Vac & 230Vac,

O/P: 100% load, Ta: 25°C

Expected Cap Life Time 10 years (115ac & 230Vac, 50% load @ 40°C)

Safety Standards / Directives

Safety Entry Low Voltage SELV (EN 60950)

Electrical Safety TUV Bauart

UL/cUL recognized

CB Scheme

EN 60950-1

UL 60950-1, CSA C22.2 No. 60950-1 (File No. E191395)

IEC 60950-1, Limited Power Source (LPS)

Industrial Control Equipment UL/cUL listed UL 508 and CSA C22.2 No. 107.1-01 (File No. E315335)

Class 2 Power Supply UL/cUL recognized UL 60950-1, CSA C22.2 No. 60950-1(File No. E191395)

CE In conformance with EMC Directive 2004/108/EC and Low

Voltage Directive 2006/95/EC

Material and Parts RoHS Directive 2011/65/EU Compliant

Galvanic Isolation Input to Output 3.0KVac

Input to Ground 3.0KVac

Output to Ground 0.5KVac

TECHNICAL DATASHEET

Sync DIN Rail Power

Supply

24V 30W 1

Phase (NEC Class 2)

/ DRS-24V30W1NZ

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (January 2016, Rev. 00)

EMC

EMC / Emissions Generic Standards: EN 61000-6-3, EN 61000-6-4

CISPR 22, EN 55022 EN 55011, FCC Title 47: Class B

Component Power Supply for General Use EN 61204-3

Immunity to Generic Standards: EN 55024, EN 61000-6-1, EN 61000-6-2

Electrostatic Discharge IEC 61000-4-2 Level 3 Criteria A1)

Air Discharge: 8kV

Contact Discharge: 6kV

Radiated Field IEC 61000-4-3 Level 3 Criteria A1)

80MHz-1GHz, 10V/M with 1kHz tone / 80% modulation

1.4GHz-2GHz, 3V/M with 1kHz tone / 80% modulation

2GHz-2.7GHz, 1V/M with 1kHz tone / 80% modulation

Electrical Fast Transient / Burst IEC 61000-4-4 Level 3 Criteria A1)

2kV

Surge IEC 61000-4-5 Level 3 Criteria A1)

Common Mode3): 2kV

Differential Mode4): 1kV

Conducted IEC 61000-4-6 Level 3 Criteria A1)

150kHz-80MHz, 10Vrms

Power Frequency Magnetic Fields IEC 61000-4-8 Criteria A1)

30A/Meter

Voltage Dips and Interruptions IEC 61000-4-11 0% of 100Vac, 20ms

30% of 100Vac, 10ms

30% of 100Vac, 500ms

60% of 100Vac, 100ms

70% of 100Vac, 500ms

0% of 240Vac, 20ms

30% of 240Vac, 500ms

60% of 240Vac, 100ms

70% of 240Vac, 500ms

Criteria A1)

Criteria B2)

Criteria A1)

Low Energy Pulse Test (Ring Wave) IEC 61000-4-12 Level 3 Criteria A1)

Common Mode3): 2kV

Differential Mode4): 1kV

Harmonic Current Emission IEC/EN 61000-3-2, Class A

Voltage Fluctuation and Flicker IEC/EN 61000-3-3

1) Criteria A: Normal performance within the specification limits

2) Criteria B: Temporary degradation or loss of function which is self-recoverable

3) Asymmetrical: Common mode (Line to earth)

4) Symmetrical: Differential mode (Line to line)

TECHNICAL DATASHEET

Sync DIN Rail Power

Supply

24V 30W 1

Phase (NEC Class 2)

/ DRS-24V30W1NZ

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (January 2016, Rev. 00)

Block Diagram

Device Description

1) Input terminal block connector

2) Output terminal block connector

3) DC voltage adjustment potentiometer

4) DC OK LED (Green)

5) Universal mounting system

TECHNICAL DATASHEET

Sync DIN Rail Power

Supply

24V 30W 1

Phase (NEC Class 2)

/ DRS-24V30W1NZ

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (January 2016, Rev. 00)

Dimensions

L x W x D: 75 x 21 x 89.5 mm [2.95 x 0.83 x 3.52 inch]

Engineering Data

Output Load De-rating VS Surrounding Air Temperature

Note

1. Power supply components may degrade, or

be damaged, when the power supply is

continuously used outside the shaded region,

refer to the graph shown in Fig. 1.

2. If the output capacity is not reduced when the

surrounding air temperature >55

°C, the

device will run into Over Temperature

Protection. When activated, power supply will

latch off, until the surrounding air temperature

is lowered or the load is reduced as far as

necessary to keep the device in working

condition, and require removal/re-application

of input AC voltage in order to restart.

3. In order for the device to function in the

manner intended, it is also necessary to keep

a safety distance of 80mm (3.14 inch) above

and below the device as well as a lateral

distance of 25mm (0.98 inch) to other units

while the device is in operation.

Depending on the surrounding air

temperature and output load delivered by the

power supply, the device can be very hot!

5. If the device has to be mounted in any other

orientation, please contact

[email protected] for more details.

Fig. 1 De-rating for Vertical Mounting Orientation

-10°C to -20°C de-rate power by 2% / °C

> 55°C de-rate power by 3.33% / °C

TECHNICAL DATASHEET

Sync DIN Rail Power

Supply

24V 30W 1

Phase (NEC Class 2)

/ DRS-24V30W1NZ

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (January 2016, Rev. 00)

Output Load De-rating VS Input Voltage

Assembly & Installation

The power supply unit (PSU) can be mounted on 35mm DIN rails in accordance with EN60715. The device should be installed with

input terminal block at the bottom.

Each device is delivered ready to install.

Mounting



No output power de-rating across the entire

input voltage range

Dismounting

Fig. 2.1 Mounting

Snap on the DIN rail as shown in Fig. 2.1:

1. Tilt the unit slightly upwards and put it onto the DIN rail.

2. Push downwards until stopped.

3. Press against the bottom front side for locking.

4. Shake the unit slightly to ensure that it is secured.

Fig. 2.2 Dismounting

To uninstall, pull or slide down the latch with screw driver as

shown in Fig. 2.2. Then slide the power supply unit (PSU) in

the opposite direction, release the latch and pull out the power

supply unit (PSU) from the rail.

TECHNICAL DATASHEET

Sync DIN Rail Power

Supply

24V 30W 1

Phase (NEC Class 2)

/ DRS-24V30W1NZ

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (January 2016, Rev. 00)

Safety Instructions

– ALWAYS switch mains of input power OFF before connecting and

disconnecting the input voltage to the device. If mains are not turned OFF,

there is risk of explosion / severe damage.

– To guarantee sufficient convection cooling, keep a distance of 80mm

(3.14 inch) above and below the device as well as a lateral distance of

25mm (0.98 inch) to other units.

– Note that the enclosure of the device can become very hot depending on

the surrounding air temperature and output load connected to the device.

Risk of burns!

– The main power must be turned off before connecting or disconnecting the

wires to the terminals!

– DO NOT insert any objects into the device.

– Dangerous voltages present for at least 5 minutes after disconnecting all

sources of power.

– The power supplies unit should be installed in minimum IP54 rated

enclosure.

– The power supplies are built in units and must be installed in a cabinet or

room (condensation free environment and indoor location) that is relatively

free of conductive contaminants.

TECHNICAL DATASHEET

Sync DIN Rail Power

Supply

24V 30W 1

Phase (NEC Class 2)

/ DRS-24V30W1NZ

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (January 2016, Rev. 00)

Functions

■Graph illustrating the Start-up Time, Rise Time, and Hold-up Time

Start-up Time

The time required for the output voltage to reach 90% of its final steady state set value, after the input voltage is applied.

Rise Time

The time required for the output voltage to change from 10% to 90% of its final steady state set value.

Hold-up Time

Time between the collapse of the AC input voltage, and the output falling to 95% of its steady state set value.

Inrush Current

Inrush current is the peak, instantaneous, input current measured

and, occurs when the input voltage is first applied. For AC input

voltages, the maximum peak value of inrush current will occur

during the first half cycle of the applied AC voltage. This peak

value decreases exponentially during subsequent cycles of AC

voltage.

Dynamic Response

The power supply output voltage will remains within ±5% of its

steady state value, when subjected to a dynamic load from 0% to

100% of its rated current.



50% duty cycle / 5Hz to 1KHz

Andere SYNC Stromversorgung Handbücher

SYNC

SYNC DRS-24V50W1NZ Bedienungsanleitung

Beliebte Stromversorgung Handbücher anderer Marken

Monacor

Monacor PS-12CCD Bedienungsanleitung

VOLTIMA

VOLTIMA MagicBox 15 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6032A Bedienungsanleitung

Miller

Miller Auto Deltaweld 452 Bedienungsanleitung

BCP

BCP PUOUBK Merkblatt

HC 2210 Bedienungsanleitung

Puls

Puls CT5.241 Bedienungsanleitung

OCZ

OCZ ZX1250W Bedienungsanleitung

iseg

iseg ECH 238 Bedienungsanleitung

Power

Power XXL A Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6631B Bedienungsanleitung

Renogy

Renogy PHOENIX 300 Bedienungsanleitung

HP 6200B Service-Handbuch

Epson

Epson Stylus Scan 2500 Betriebsanleitung

Pulsar

Pulsar GREEN POWER CCTV PoE POE044816 Bedienungsanleitung

Puls

Puls MiniLine ML50.100 Bedienungsanleitung

Puls

Puls AS-Interface SLA4.100 Bedienungsanleitung

Kenwood

Kenwood PS-60 Bedienungsanleitung