Synergy Global Technology RAC141 Bedienungsanleitung

Toll Free: 1-888-865-6888

Tel: 510-226-8368 Fax: 510-226-8968

Email: [email protected]

EnhanceRAID R4 User Manual

RAC141

ULTRA 320 SCSI to SATA

Disk Subsystem

User Manual

Version 1.0 (Oct. 2006)

www.RackmountMart.com

email : [email protected] SYNERGY GLOBAL TECHNOLOGY INC 1-888-865-6888

Enhance |Technology, Inc.

EnhanceRAID R4 User Manual

Preface

About this Manual

This manual is designed and written for users of the RAC141 . Users

should ideally be familiar and have some experience with RAID planning and

data storage operations. However, this manual will provide instructions and

education for those who have little or no experience in RAID to install and setup

the RAC141 .

Notice

Product features and specifications described in this manual are subject to

change without notice.

The manufacturer shall not be liable for any damage, or for the loss of

information resulting from the performance or use of the information contained

herein.

EnhanceRAID R4 User Manual

www.RackmountMart.com

email : [email protected] SYNERGY GLOBAL TECHNOLOGY INC 1-888-865-6888

Thank you for using

Synergy Global Technology Inc.

products; if you have

any question, please e-mail to

“[email protected]”

. We will answer

your question as soon as possible.

Enhance |

EnhanceRAID R4 User Manual

Table of Contents

Chapter 1 Product Overview .......................................................... 5

1.1 Features........................................................................... 5

1.2 Specifications................................................................... 6

Chapter 2 Environment Setup........................................................ 7

2.1 Before installation ............................................................ 7

2.2 Product overview ............................................................. 9

2.3 Install SATA disks............................................................ 9

2.4 Connect cables.............................................................. 10

Chapter 3 GUI Connection

3.1 GUI – http....................................................................... 11

3.2 RS-232 serial port.......................................................... 11

3.3 Remote control – secure shell ....................................... 11

3.4 LCM ............................................................................... 12

Chapter 4 GUI operation ............................................................... 13

4.1 RAC141 Menu................................................................ 13

4.2 Login.............................................................................. 14

4.3 Quick install.................................................................... 15

4.4 System config ................................................................ 16

4.4.1 IP address................................................................17

4.4.2 Password................................................................. 17

4.4.3 Date.........................................................................17

4.4.4 Mail..........................................................................18

4.4.5 SNMP ......................................................................18

4.4.6 Event log.................................................................. 19

4.5 Volume config................................................................ 19

4.5.1 Physical disk............................................................ 20

4.5.2 Volume group ..........................................................22

4.5.3 User data group....................................................... 23

4.5.4 Cache volume..........................................................25

4.5.5 Logical unit...............................................................26

4.6 Enclosure management................................................. 27

4.6.1 SAF-TE config .........................................................27

4.6.2 Voltage & Temperature............................................27

4.6.3 SMART....................................................................28

4.7 Maintenance .................................................................. 28

4.7.1 Upgrade...................................................................29

EnhanceRAID R4 User Manual

www.RackmountMart.com

email : [email protected] SYNERGY GLOBAL TECHNOLOGY INC 1-888-865-6888

Enhance |Technology, Inc.

EnhanceRAID R4 User Manual

4.7.2 Info...........................................................................29

4.7.3 Shutdown................................................................. 30

4.8 Logout............................................................................ 30

Chapter 5 Advanced operation .................................................... 31

5.1 Create volume group ..................................................... 31

5.2 Create user data volume................................................ 32

5.3 Attach and detach Bus ID, SCSI ID, and LUN............... 33

5.3.1 Attach LUN to UDV..................................................33

5.3.2 Detach Bus ID, SCSI ID and LUN from UDV........... 34

5.4 Create dedicated cache................................................. 35

5.5 Set global spare and dedicated spare disks .................. 36

5.6 Migration / Expansion .................................................... 37

5.7 Snapshot........................................................................ 38

5.8 Auto snapshot................................................................ 39

Chapter 6 Formatting and Partitioning the R4……….....43

6.1 Windows Users…………………………………………………..43

6.2Formatting drive over 2TB capacity on Windows Vista………46

Appendix 48

A.1 Glossary......................................................................... 46

A.2 RAID Explained.............................................................. 48

EnhanceRAID R4 User Manual

www.RackmountMart.com

email : [email protected] SYNERGY GLOBAL TECHNOLOGY INC 1-888-865-6888

Enhance

- 5 -

Chapter 1 Product Overview

1.1 Features

RAC 141 Subsystem is a high-performance RAID subsystem built

around EnhanceRAID controller with the features listed below:

•Single channel performance is over 240MB/sec

•Snapshot-on-the-box without relying on host software

•SATA II drive interface (Backward-compatible)

•Configurable N-way mirror for high data protection

•On-line volume expansion with no system down-time

•Extensible APIs for host server integration

When properly configured, RAC 141 provides non-stop data storage

service with a high degree of fault tolerance through the use of RAID technology

and advanced array management features.

RAC 141 connects to the host system through an U320 SCSI interface

for optimized performance in speed. It can be configured to any RAID level to

provide the most reliable data protection and fastest data transfer rates as

required by user applications.

RAC 141 is designed with a new level of polynomial technology to

implement the RAID 6 function. RAID 6 arrays allow up to two simultaneous HDD

failures without impact on the existing data, making the RAC 141 the

most reliable RAID system.

RAC 141 has SNAPSHOT feature that can perform an online speedy

logical data backup on the controller level without affecting the performance of

the server host.

RAC 141 offers array migration and expansion technology to give users

the flexibility to change RAID levels and increase array capacity for increased

performance or data security to meet the changing demands of applications.

RAC 141 is the most cost-effective disk array subsystem with

completely integrated high-performance and data-protection capabilities that

meet or exceed the highest industry standards.

EnhanceRAID R4 User Manual

www.RackmountMart.com

email : [email protected] SYNERGY GLOBAL TECHNOLOGY INC 1-888-865-6888

Enhance |Technology, Inc.

EnhanceRAID R4 User Manual - 6 -

1.2 Specifications

Model Specifications

RAID Engine EnhanceRAID 320

Storage Processor Intel IOP80331 500Mhz

Hybrid Technology SCSI to SATA

Supported RAID Levels 0, 1, 0+1, 3, 5, 6 & JBOD

Memory 256MB DDR333 DIMM (Max. up to 1GB)

Max. HDD Supported 4 x SATA I/II HDDs

Max. HDD Capacity 750GB

Max. System Capacity up to 4.0TB

Host Connection 1- Ultra320 SCSI Port

Host Connection 2- Multi-lane Port

Remote management via 1-Ethernet Port

RAID management Web browser & SNMP

OS Independent & Transparent Yes

Enclosure Specification

Hot-Swappability 4 x Removable HDD Tray

Drive Failure LED indicator for each HDD

System Fan 4 x 4cm fan (Middle)

Power Supply Single PS2 150Watt

Temperature built-in thermal & fan sensor

Dimensions(H x W x D) 31 " x 24 " x 7.5"

Weight (without disk) 30 Lbs

Power Supply (150W)

Input Range 100 to 240 VAC. 10%

Voltage +5V/25A +12V/10A 47-63Hz

Agency Approval EMI/RFI, CE, FCC B, BSMI

Safety UL, CUL, CB, TUV, CCC

Physical & Environment

Operating Temperature 0°C ~ 40°C

Non-Operating Temperature -10°C ~ 50°C

Relative Humidity 5% to 95% non-condensing

Supported Operating System

Windows 95, 98/98SE, NT, 2000, Millennium, XP, 2003

Mac 9.1 and above, including OSX, OSX Server, XSERVE

Mac 8.6-9.04 support possible with ATTO SCSI HBA.

Linux (all latest builds) which support SCSI.

And all other systems supporting SCSI protocol

Optional Features

•Snapshot on the Box

•N-Way Mirror

•Battery Backup

•System Handle

Manufacturer Warranty

System Warranty 3 Years

Advanced Replacement 90 Days

EnhanceRAID R4 User Manual

www.RackmountMart.com

email : [email protected] SYNERGY GLOBAL TECHNOLOGY INC 1-888-865-6888

Enhance |

EnhanceRAID R4 User Manual

Chapter 2 Environment Setup

2.1 Before installation

Requirement:

Prepare a host system with a SCSI HBA card. For optimized performance, a

SCSI Ultra 320 HBA is recommended. The host system should have one free

COM port to be used for the initial setup. The management and configuration

web GUI can be accessed remotely after proper setup.

Package contents

•1 pcs 4x3.5'' SATA-II HDDs Rackmount RAID Storage Enclosure

•4 pcs Hot-Swap Removable HDD Tray (Installed)

•4 pcs Cooling Fan Module (Installed)

•One 150 Watt Power Supply (Installed)

•One SCSI Cable and One SCSI Terminator

•Heavy Duty Foam Protection

•Accessory Box:

oScrews for Mounting Hard Drives

oOne Standard Power Cord

R4 Rackmount RAID Storage

Enclosure 4 pcs Hot-Swap Removable HDD Tray Accessory Box

(Screws, Power Cord)

SCSI Cable and Terminator Heavy Duty Foam Protection

EnhanceRAID R4 User Manual

www.RackmountMart.com

email : [email protected] SYNERGY GLOBAL TECHNOLOGY INC 1-888-865-6888

Enhance |Technology, Inc.

EnhanceRAID R4 User Manual - 8 -

Optional Items

Model Number:

AC-ETR-TRAY

Description:

Additional Hot-Swap Removable HDD Tray

Model Number:

Upgrade-MT512

Description:

Memory upgrade from 256MB to 512MB

Model Number:

Upgrade-MT1G

Description:

Memory upgrade from 512MB to 1G

Caution

•Before starting any type of hardware installation, please ensure that all

power switches have been turned off and all power cords have

been disconnected to prevent personal injury and damage to the

hardware.

To avoid overheating, RAC 141 should be operated in a well-

ventilated area and in such a way that sufficient airflow is

maintained across the controller chips.

•Static electricity can damage electronic components. To guard against

such damage:

1. Work in a static-free environment

2. Wear a grounded anti-static wrist strap

3. Store uninstalled components in anti-static bags

4. Handle PCBs by their edges and avoid touching chips and

connectors.

•Environmental requirements:

Temperature: 0°C to 40°C (32°F to 104°F)

Humidity: 5% to 95%, non-condensing

EnhanceRAID R4 User Manual

www.RackmountMart.com

email : [email protected] SYNERGY GLOBAL TECHNOLOGY INC 1-888-865-6888

Enhance |

EnhanceRAID R4 User Manual - 9 -

2.2 Product overview

Front view

Figure 2.2.1

Rear view

Figure 2.2.2

2.3 Install SATA disks

If the hard drives do not come with the RAID system, please follow the

instructions for installation below.

•Press the release button and pull the handle to remove the disk tray. The

trays may have to be unlocked first using the key provided. (Figure 2.3.1,

Figure 2.3.2)

•Insert the disk into the disk tray with the connectors directed toward the open

rear of the tray.

Access LED

Power LED

Release

EnhanceRAID R4 User Manual

www.RackmountMart.com

email : [email protected] SYNERGY GLOBAL TECHNOLOGY INC 1-888-865-6888

Inhaltsverzeichnis

Andere Synergy Global Technology Computerhardware Handbücher

Synergy Global Technology

Synergy Global Technology LCD1U17-01 Series Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung