Synergy Global Technology LCD1U19-016 Bedienungsanleitung

Toll Free: 1-888-865-6888

Tel: 510-226-8368 Fax: 510-226-8968

Email: [email protected]

User Manual 19” LCD

1U Quad Display Drawer

LCD1U19-0 16

Options :

- DC power

Legal Information

First English printing, October 2002

Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness

of the contents. The information in this document is subject to change without notice. We are not liable for any injury or

loss that results from the use of this equipment.

Safety Instructions

Please read all of these instructions carefully before you use the device. Save this manual for

future reference.

■Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.

■Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with

temperatures not exceeding 40º Celsius (104º Fahrenheit).

■When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing

damage to other equipment or injury to persons nearby.

■When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the

power supply. Proper air convection is necessary to keep it from overheating.

■Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.

■If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current

labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed

on the equipment’s ratings label.

■Observe all precautions and warnings attached to the equipment.

■If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being

damaged by transient over-voltage.

■Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power

supply or on other hardware may cause damage, ﬁre or electrical shock.

■Only qualiﬁed service personnel should open the chassis. Opening it yourself could damage the equipment and

invalidate its warranty.

■If any part of the equipment becomes damaged or stops functioning, have it checked by qualiﬁed service personnel.

What the warranty does not cover

■Any product, on which the serial number has been defaced, modiﬁed or removed.

■Damage, deterioration or malfunction resulting from:

□Accident, misuse, neglect, ﬁre, water, lightning, or other acts of nature, unauthorized product modiﬁcation, or

failure to follow instructions supplied with the product.

□Repair or attempted repair by anyone not authorized by us.

□Any damage of the product due to shipment.

□Removal or installation of the product.

□Causes external to the product, such as electric power ﬂuctuation or failure.

□Use of supplies or parts not meeting our speciﬁcations.

□Normal wear and tear.

□Any other causes which does not relate to a product defect.

■Removal, installation, and set-up service charges.

Regulatory Notices Federal Communications Commission (FCC)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of

the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation.

Any changes or modiﬁcations made to this equipment may void the user’s authority to operate this equipment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following measures:

■Re-position or relocate the receiving antenna.

■Increase the separation between the equipment and receiver.

■Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

www.rackmountmart.com

< Part. 3 >

< Part. 4 >

Options

3.1 48V, 24V or 12VDC power P. 7

< Part. 2 > Speciﬁcations / OSD

2.1 Product Speciﬁcations

2.2 On-screen Display Operation ( OSD )

P.4 - 5

P.6

< Part. 1 >

1.1 Package Content

1.2 Structure Diagram & Dimension

1.3 Installation

Contents

P. 1

P.1 - 2

P. 3

Contents

Quad Display Connection & Operation

4.1 QD Connection

4.2 QD ALARM Connection & Operation

4.3 QD Remote Control Connection & Operation

4.4 QD OSD Operation

4.5 QD On-screen Menu

4.6 QD VCR Operation

4.7 QD Speciﬁcation

P. 8

P.9 - 10

P.11 - 15

P.16

P.17 - 19

P.20

P.21

www.rackmountmart.com

LCD1U19-016

■It is very important to mount the equipment in a suitable cabinet or on a stable surface.

■Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive

dust, dirt, heat, water, moisture and vibration.

The equipment comes with the standard parts shown in package content. Check and make sure they are

included and in good condition. If anything is missing, or damaged, contact the supplier immediately.

Unpacking

Before Installation

How To Clean Your LCD Monitor

Caution :

■To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or

plugging your monitor into an electrical outlet.

■When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can

scratch or damage your display. Pressure damage is not covered under warranty.

■Use only cleansers made speciﬁcally for cleaning monitors and monitor screens. Cleansers not made to

clean monitors and monitor screens can scratch the LCD display or strip off the ﬁnish.

■Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly

onto the screen or case can cause damage which is not covered under warranty.

■Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood based

paper product such as paper towels can scratch your LCD screen.

Cleaning Your Monitor

To clean your LCD safely, please follow these steps :

Disconnect the power cord.

Gently wipe the surface using a clean, dry microﬁber cloth. Use as little pressure as possible.

Cleaning Tough Marks and Smudges

To remove tough marks and smudges, please follow these steps :

Disconnect the power cord.

Spray a small amount of non-abrasive cleanser on a microﬁber cloth.

Gently wipe the surface. Use as little pressure as possible.

Wait until your monitor is completely dry before plugging it in and powering it up.

Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your

microﬁber cloth ﬁrst, not directly on the parts you are cleaning.

www.rackmountmart.com

LCD panel

Installation Slide

LCD OSD membrane

Quad display control membrane

Thumb Screw

< 1.1 > Package Content

P. 1

< Part 1 >

- 6ft VGA cable X 1

- Power cord X 1

- M6 screw, cage nut & cup washer X 8

< 1.2 > Structure Diagram

The above package content is only for the pure model ( VGA only ).

It varies with options such as DC power.

Setup

VCRSEQ

Quad DisplayControlLCD OSDMenu

www.rackmountmart.com

LCD1U19-016 unit X 1

The weight is only for the pure models. It varies with accessories & options

such as DC power.

< 1.2 > Dimension

P. 2

Front View

Side View UNIT : mm

1mm = 0.03937 inch

Top View

Model Product Dimension

(W x D x H)

Net

Weight

442 x 650 x 44 mm

17.4 x 25.6 x 1.73"

12.5 kg

28 lb

www.rackmountmart.com

LCD1U19 -016

■Fix the display drawer into the rack.

Complete the installation

Step 3

■Insert the left and right rear mounting brackets into

the display drawer.

Step 1

< 1.3 > Installation - How to install Installation Slides

P. 3

Step 2

■Measure the depth of the front and rear mounting rails.

■Align each rear mounting bracket to a suitable length.

M6 screw, cage nut & cup washer x 8 are provided.

www.rackmountmart.com

Power Power Supply Range Auto-sensing 100 to 240VAC,

50 / 60Hz

Power Consumption Screen display ON 25W or less

Power saving mode 4W or less

Power button OFF 1W or less

Regulatory Safety Approval FCC & CE

LCD

Panel Manufacturer

Panel Size ( diagonal ) 19-inch TFT color LCD

Display pixel ( dots x lines ) 1280 x 1024

Brightness ( typ. ) 250

Contrast Ratio ( typ. ) 1000:1

Color 16.7 M

Viewing Angle ( L/R/U/D ) 80/80/80/80

Response Time ( ms ) 5

Dot pitch ( mm ) 0.294

Display Area ( mm ) 376.32H x 301.05V

Surface treatment Haze 25%, Hard-coating

Surface hardness 3H

Backlight Type CCFL

MTBF ( hrs ) 50,000

< 2.1 > Product Speciﬁcations

P. 4

< Part 2 >

Video

Connectivity Analog VGA Analog 0.7Vp-p

Environmental

Conditions Operating Temperature 0 to 50°C degree

Humidity 20~90%, non-condensing

Storage Temperature -5 to 60°C degree

Humidity 5~90%, non-condensing

Shock 10G acceleration (11ms duration)

Vibration 5~500Hz 1G RMS random

www.rackmountmart.com

Physical

Speciﬁcation

Product ( W x D x H ) 442 x 650 x 44 mm

17.4 x 25.6 x 1.73 inch

Net Weight 12.5 kgs / 28 lbs

Applicable

Format VGA Input PC Signal 1280 x 1024 x 60 / 75Hz

1280 x 960 x 60Hz

1280 x 760 x 60 / 75Hz

1152 x 864 x 75Hz

1024 x 768 x 60 / 70 / 75Hz

848 x 480 x 60Hz

800 x 600 x 60 / 72 / 75Hz

720 x 400 x 70Hz

640 x 480 x 60 / 72 / 75Hz

640 x 400 x 70Hz

640 x 350 x 70Hz

P. 5

www.rackmountmart.com

Inhaltsverzeichnis

Andere Synergy Global Technology Monitor Handbücher

Synergy Global Technology

Synergy Global Technology ID-55AW Bedienungsanleitung

Synergy Global Technology

Synergy Global Technology LCDR9U19-02 Bedienungsanleitung

Synergy Global Technology

Synergy Global Technology ID-26Aw-LED Bedienungsanleitung

Synergy Global Technology

Synergy Global Technology ID-E30Aw Bedienungsanleitung

Synergy Global Technology

Synergy Global Technology ID-E21Aw Bedienungsanleitung

Synergy Global Technology

Synergy Global Technology ID-HE21Aw Bedienungsanleitung

Synergy Global Technology

Synergy Global Technology LCDR8U19-09 Bedienungsanleitung

Synergy Global Technology

Synergy Global Technology ID-08A Bedienungsanleitung

Synergy Global Technology

Synergy Global Technology LCDR7U17-02 Bedienungsanleitung

Synergy Global Technology

Synergy Global Technology LCDR7U19-09 Bedienungsanleitung

Synergy Global Technology

Synergy Global Technology LCDR6U17-03 Bedienungsanleitung

Synergy Global Technology

Synergy Global Technology ID-32Aw Bedienungsanleitung

Synergy Global Technology

Synergy Global Technology ID-K32Aw Bedienungsanleitung

Synergy Global Technology

Synergy Global Technology ID-06A Bedienungsanleitung

Synergy Global Technology

Synergy Global Technology LCDR6U15-01 Bedienungsanleitung

Synergy Global Technology

Synergy Global Technology ID-19W Bedienungsanleitung

Synergy Global Technology

Synergy Global Technology LCDR7U19-02 Bedienungsanleitung

Synergy Global Technology

Synergy Global Technology ID-E27Aw Bedienungsanleitung

Synergy Global Technology

Synergy Global Technology ID-19D Bedienungsanleitung

Synergy Global Technology

Synergy Global Technology ID-55Pw-LED Bedienungsanleitung

Synergy Global Technology

Synergy Global Technology LCDR9U20-02 Bedienungsanleitung

Synergy Global Technology

Synergy Global Technology ID-20A Bedienungsanleitung

Synergy Global Technology

Synergy Global Technology LCDR6U17-02 Bedienungsanleitung

Synergy Global Technology

Synergy Global Technology ID-H19A Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung