Synexis SPHERE Bedienungsanleitung
SPHERE
OWNER’S MANUAL
2www.synexis.ca
+1 844-352-7680
IMPORTANT SAFETY INSTRUCTIONS
BEFORE USING THIS DEVICE READ ALL INSTRUCTIONS AND CAUTIONARY STATEMENTS IN
THIS MANUAL AND ON THE DEVICE.
The Sphere is an electrical device. Please read the safety instructions and considerations before
use and take the necessary precautions to reduce the risk of re, electric shock or injury. The
Limited Warranty applies only if the unit is used in accordance with these instructions.
✔
Use the power cable provided with your device. The plug ts securely into a standard
outlet. Do not alter the plug in any way.
⚠WARNING: Electrical shock can cause personal injury or death.
⚠WARNING: Skin or eye damage may result from directly viewing the light
produced by the lamp in this apparatus. Always disconnect power before
relamping or servicing. Replace Lamp with Lamp Model No., M4-CX-08,
Manufactured by LCD Lighting Inc.
⚠WARNING: Do not allow the device to become clogged with dust or other debris.
Check it regularly and replace the catalytic Sail or lter if they become clogged.
⚠WARNING: To reduce the risk of re or electric shock, do not use this product
with any solid-state speed control device.
When using an electrical device, basic precautions should always be observed, including
the following:
⚠WARNING
These warnings apply to the Synexis®device and, where applicable, to all tools and accessories
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR SERIOUS INJURY:
1. Keep combustible materials, like bedding, clothing, curtains, furniture and paper at least
three feet away from the device when it is plugged in.
2. Use only as described in this Synexis Operating Manual. Do not perform any maintenance
other than what is shown in this manual. Any other use, not specically recommended by
the manufacturer may result in re, electric shock or injury.
3. Make sure device is assembled by following manufacturer’s instructions completely. Do
not dismantle the device.
3www.synexis.ca
+1 844-352-7680
4. This Sphere device is not a toy. Use caution when children are nearby. Children under
3 years old should be kept away unless continuously supervised. Do not allow children to
play with the Sphere device.
5. This Sphere device is not intended for use by persons (including children) with reduced
physical or reasoning capabilities, or lack of experience and knowledge, unless they have
been given supervision or instruction about the use of the Sphere device by a person
responsible for their safety.
6. Sphere device is suitable for dry locations ONLY. DO not use outdoors, on or near wet
surfaces. Do not use in bathrooms, laundry areas or similar indoor locations. Never place
the Sphere device where it may fall into a bathtub or other water container. Do not use or
store near a bath or shower, or a swimming pool.
7. Do not use the Sphere device in areas where fuel, paint, or ammable liquids are used or
stored where their vapors are present.
8. Do not use in conjunction with or directly next to an air freshener or similar products.
9. Do not handle any part of the plug or Sphere device with wet hands.
10. UV light source. Disconnect power cord before opening cover.
11. Do not sit on or place any object on this device.
12. Do not use with a damaged power cord or plug. If the power cord is damaged, it must
be replaced by Synexis, its service agent or similarly qualied persons in order to avoid
a hazard.
13. Do not unplug the Sphere device by pulling on the power cord. To unplug, grasp the plug,
not the cord and remove from the power outlet.
14. Do not stretch the power cord or place the cord under strain. Keep the power cord away
from heated surfaces.
15. Do not run the power cord underneath carpeting. Do not cover cord with throw rugs,
runners or similar coverings. Do not route cord under furniture or other appliances.
Avoid placing power cord in high trac areas and where it could be tripped over.
16. To prevent a possible re, do not use with any opening or exhaust blocked, and keep free
of dust, lint, hair, and anything that may reduce airow. Do not put any object into the inlet
grill or exhaust opening as this may cause electric shock or re, or damage to the Sphere
device.
17. In order to avoid overheating, do not cover the Sphere device.
18. For the best performance, place the Sphere device where air intake and top grill are
unobstructed.
19. Turn off all controls before unplugging. Always unplug Sphere device from the power
outlet when it is not in use.
4www.synexis.ca
+1 844-352-7680
20. If the Sphere device is not working as it should, has been dropped, struck, damaged,
left outdoors, or dropped into water, do not use and contact your Synexis Account
Representative.
21. Contact Synexis when service or repair is required. Do not disassemble the Sphere
device, as incorrect re-assembly may result in electric shock or re.
22. Do not use any cleaning agents or lubricants on the Sphere device. Unplug power cord
from outlet before performing any type of maintenance.
23. Clean the air intake with a dry cloth or vacuum cleaner to remove dust buildup.
24. To avoid a tripping hazard, secure power cord when not in use.
25. Do not use Sphere device near furnaces, replaces, stoves or other high-temperature
heat sources.
26. Do not spray or apply perfumes directly on or near the lter. Keep essential oils and
chemicals away from the Sphere device.
27. Use of this equipment adjacent to or stacked with other equipment should be avoided
because it could result in improper operation. If such use is necessary, this equipment
and the other equipment should be observed to verify that they are operating normally.
READ AND SAVE THESE INSTRUCTIONS
5www.synexis.ca
+1 844-352-7680
Contents
Welcome................................................................................22
Included Parts .......................................................................22
Ships Separately ...................................................................22
About Synexis .......................................................................23
Indications for Use................................................................23
Legal Notice ..........................................................................23
System Specications..........................................................24
Installation.............................................................................25
Troubleshooting ....................................................................28
Maintenance..........................................................................30
Getting the Most from Your Synexis System ......................31
Warranty ................................................................................31
6www.synexis.ca
+1 844-352-7680
Welcome
Thank you for choosing Synexis®and this Sphere device.
Before using the Synexis system, please take a few minutes to:
✔
Familiarize yourself with the Sphere device
✔
Familiarize yourself with the installation steps and required tools
✔
Inspect your system and parts
Please contact your Synexis Account Representative for questions or additional information.
Included Parts
✔
1 Synexis®Sphere device
✔
1 Custom UV-A Bulb
✔
1 Starter Kit – shipped separately. Starter kit includes:
2 Sails
1 Carbon Filter
2 MERV 11 Filters
✔
1 Power Cord (3 m. or 9.8 ft.)
✔
1 Quick Start Guide
✔
1 Security Torx T10 “L” shaped tool (for Bulb Cover)
✔
1 Stand (already installed)
Ships Separately
✔
1 Starter Kit – includes:
2 Sails
1 Carbon Filter
2 MERV 11 Filters
After opening the box, unpack and inspect your device for damage.
DO NOT OPERATE THIS DEVICE IF ANY DAMAGE IS NOTED. If the device is damaged, contact your
Synexis Account Representative.
7www.synexis.ca
+1 844-352-7680
About Synexis
Synexis patented microbial reduction technology allows for the natural and continuous reduction
of microbial contamination in occupied spaces. Synexis Microbial Reduction Systems are patented
for use in the United States and around the world. By encompassing all areas of an enclosed space,
Synexis systems can reach the most important areas of a facility.
Indications for Use
This product is not sold as a medical device and is not intended to be used to diagnose any
disease or condition, nor should it be used in the mitigation, treatment, or prevention of any disease
or condition. The Sphere device is a key component to the Synexis Microbial Reduction System.
Legal Notice
While every attempt is made to ensure the accuracy of the information contained in this manual,
Synexis accepts no liability for errors or omissions, or any consequences deriving from the
use of information contained herein. This Sphere manual is provided “as is” and without any
representation, term, condition or warranty of any kind, either express or implied. To the extent
permitted by law, Synexis shall not be liable to any person or entity for any loss or damage which
may arise from the use of this manual. We reserve the right at any time and without any notice to
remove, amend or vary any of the content which appears herein.
Your Synexis®Sphere
System is Assembled in
the USA! E495096
8www.synexis.ca
+1 844-352-7680
SPHERE
System Specications
The Sphere is a portable device designed for deployment with an inaccessible HVAC system.
The Sphere can be mounted virtually anywhere and requires only a standard 100–120V, 50/60Hz
(North America), 200–240V, 50/60Hz (OUS) VAC outlet.
Specications
Weight 14 lbs.
Electrical
North America:
100–120V, 50/60Hz
.75A 90W
OUS:
200–240V, 50/60Hz
.38A 90W
Specications
Material ABS
Color White and Gray
Mounting Options Desktop (Shown),
Wall Mount
Dimensions
Width: 18.7” (47.5 cm)
Height: 18.7” (47.5 cm)
Depth: 7.7” (17.8 cm)
18.7 in
476.0 mm
21.6 in
549.3 mm
7.7 in
196.7 mm
9www.synexis.ca
+1 844-352-7680
Installation
Getting to know your device:
The power cord and power switch are
located on the back of the device.
To adjust the device airow, use
the fan speed control switch
located on the side of the device.
The Sphere device includes lters (carbon & MERV 11), Sail, fan, power cord, and one non-germicidal UV-A bulb.
Hold the bottom of the device and
grab the recess on the top.
Pull the top and bottom of the cover
to disengage the magnets.
Remove the cover. To put the cover back on, position
the top and bottom pins over the
slots. Let the magnets reengage.
Fasten the screws.
Removing the cover:
Remove the screws at the top and
bottom. Note: you will have one of
three types of screws:
1. safety screws: Remove with
Torx 10 tool.
2. thumb screws: Remove small top
thumb screw, then remove larger
bottom thumb screw to remove cover.
3. thumb screws with retention clips:
Loosen top and bottom thumb screws
to remove cover. Thumb screws will
not come out completely.
1 2
3 4
5 6 7
10 www.synexis.ca
+1 844-352-7680
Installation (cont.)
* First, insert the pleated MERV 11 lter (white or blue) and place on the bottom with the arrows pointing toward the
fan. The carbon lter (black) is placed on top, closest to the fan. The carbon lter can be installed in any direction.
Hold tabs and insert the Sail at and
horizontally into the slot near the top
of the device.
Hold the tabs of the Sail and pull
toward you.
Remove and insert new Sail.
Installing/Replacing the Sail:
8 9 10
11 12 13
Installing/Replacing the lters:
Andere Handbücher für SPHERE
6
Inhaltsverzeichnis
Sprachen:
Beliebte Beleuchtungsausrüstung Handbücher anderer Marken
Qazqa
Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung
Commercial Electric
Commercial Electric 54568141 Bedienungsanleitung
CREE LIGHTING
CREE LIGHTING 304 Series Bedienungsanleitung
Goobay
Goobay 49867 Bedienungsanleitung
ECOMAN ITALIA
ECOMAN ITALIA LED T8 Bedienungsanleitung
Alkalite
Alkalite Krypton KT-81 Bedienungsanleitung
