Synology DiskStation DS1522+ Handbuch

Synology NAS DS1522+

Hardware Installation Guide

Table of Contents

Chapter 1: Before You Start

Package Contents 3

Synology DS1522+ at a Glance 4

System Modes and LED Indicators 5

Other LED Indicators 7

Hardware Specication 8

Spare Parts 9

Optional Accessories 9

Safety Instructions 10

Chapter 2: Hardware Setup

Tools and Parts for Component Installation 11

Install Drives 11

Start up Your Synology NAS 13

Add a Memory Module to Synology NAS 14

Add an M.2 NVMe SSD to Synology NAS 16

Install Network Upgrade Module 17

Chapter 3: Install DSM on Synology NAS

Install DSM with Web Assistant 18

Learn More 18

Synology_HIG_DS1522+_20220124

Thank you for purchasing this Synology product! Before setting up your new Synology NAS, please check the

package contents to verify that you have received the items below. Also, make sure to read the safety instructions

carefully to avoid harming yourself or damaging your Synology NAS.

Note: All images below are for illustrative purposes only, and may di󰀨er from the actual product.

Package Contents

Main unit x 1 AC power cord x 1

AC power adapter x 1

Screws for 2.5" drives x 24 Hard drive tray key x 2 RJ-45 LAN cable x 2

Before You Start 1

Chapter

4Chapter 1: Before You Start

Synology DS1522+ at a Glance

No. Article Name Location Description

1 STATUS Indicator

Front

Displays the status of the system. For more information, see

"System Modes and LED Indicators".

2 Drive Status Indicator Displays the status of drive. For more information, see "Other

LED Indicators".

3 Drive Tray Lock Lock or unlock drive trays.

4 USB 3.2 Gen 1 Port Connect external drives or other USB devices to the Synology

NAS here.

5 Power Button and

Indicator

1. Press to power on your Synology NAS.

2. To power o󰀨 the Synology NAS, press and hold until you

hear a beep sound and the Power LED starts blinking.

6 Drive Tray Install drives (hard disk drives or solid state drives) here.

7 eSATA Port

Rear

Connect Synology Expansion Unit1to the Synology NAS here.

8 Power Port Connect power cord here.

9 Network Upgrade Slot Supports the addition of E10G22-T1-Mini network upgrade

module.

10 USB 3.2 Gen 1 Port Connect external drives or other USB devices to the Synology

NAS here.

11 LAN Port Connect network cable here.

12 RESET Button

1. Mode 1: Press and hold until you hear a beep sound to

restore the IP address, DNS server, and password for the

admin account to default.

2. Mode 2: Press and hold until you hear a beep, release

the button immediately, then press and hold again until

you hear three beeps to return the Synology NAS to "Not

Installed" status so that DiskStation Manager (DSM) can be

reinstalled.

For detailed information on how to reset your Synology NAS,

please refer to this article.

13 Fan Disposes of excess heat and cools the system. If the fan

malfunctions, the Synology NAS will emit a beeping sound.

14 Kensington Security Slot Attach a Kensington security lock here.

1For more information about Synology Expansion Unit supported by your Synology NAS, please visit www.synology.com.

5Chapter 1: Before You Start

System Modes and LED Indicators

System Modes and Denitions

There are 7 system modes in Synology NAS. The System modes and their denitions are as below:

System mode Denition

Powering on

Synology NAS is powering on when you press the power button or restarting when

you run operations in DSM. During the boot up process, the device also performs

hardware initialization, such as hardware reset or BIOS initialization.

Shutting down Synology NAS is shutting down as a result of pressing the power button or operation

in DSM.

DSM not ready

DSM is not ready for use. This could either be:

• Synology NAS is powered on, but DSM is not properly installed.

• Synology NAS is currently powering on and initializing services necessary for

DSM to fully function.

• The attached UPS device has insu󰀩cient power; DSM stops all services to

prevent data loss (enters safe mode).

DSM is ready for use DSM is fully functioning and users can sign in.

Hibernation Synology NAS has been idle for a while and is now in Hibernation mode.

Application

Certain packages/services (e.g., USB Copy and Find me service) while in operation

will control the actions of the LED. After the operation is complete, the LED indicator

will return to its normal state.

Powered o󰀨 Synology NAS is powered o󰀨.

Identify System Modes

You can identify the system mode through the POWER and STATUS LED indicators. Please refer to below table

for more details.

System mode

LED Indicator

POWER STATUS

Blue Green Orange

Powering on Blinking O󰀨 O󰀨

Shutting down Blinking Static O󰀨/Static1

DSM not ready Static Blinking O󰀨/Blinking1

DSM is ready for use Static Static O󰀨/Static1

Hibernation Static O󰀨 O󰀨/Static1

Application Static Switching

Powered o󰀨 O󰀨 O󰀨 O󰀨

Note:

1 If the STATUS LED remains static orange or continuously blinks orange, this indicates there are system

errors such as fan failure, system overheating, or volume degrade. Please sign in to DSM for detailed

information.

6Chapter 1: Before You Start

Transitions between System Modes

To better understand the transition between system modes, please refer to below examples:

• Powered on with no DSM installed:

Powered o󰀨 > Powering on > DSM not ready

• Powered on with DSM installed:

Powered o󰀨 > Powering on > DSM not ready > DSM is ready for use

• Enter hibernation then wake up from hibernation:

DSM is ready for use > Hibernation > DSM is ready for use

• Shutdown Synology NAS:

DSM is ready for use > Shutting down > Powered o󰀨

• Power failure with UPS attached:

DSM is ready for use > DSM not ready (due to power failure, DSM enters safe mode) > Shutting down >

Powered o󰀨 > Powering on (power has recovered, DSM will reboot) > DSM not ready > DSM is ready for use

7Chapter 1: Before You Start

Other LED Indicators

LED Indicator Color Status Description

DRIVE status

Green

Static Drive ready and idle

Blinking Accessing drive

Orange Static

Locating drive

Drive deactivated by user

Port disabled1

Drive health status is Critical or Failing

Removing this drive will cause system

damage; this is the only drive with DSM

installed.

O󰀨 No internal drive

Rear LAN

(on left side of jack)

Green

Static Network connected

Blinking Network active

O󰀨 No network

Rear LAN

(on right side of jack)

Green Static 1 Gbps connection

Orange Static 100 Mbps connection

O󰀨 10 Mbps connection/No network

Note:

1 When the drive LED indicator is red/orange, we recommend you sign in to DSM and go to Storage Manager

> HDD/SSD for more information.

2 Please try to restart your Synology NAS or re-insert the drives, then run the HDD/SSD manufacturer's

diagnostic tool to check the health status of the drives. If you can sign in to DSM, please run the built-in

S.M.A.R.T. test to scan the drives. If the problem remains unresolved, please contact Synology Technical

Support for help.

8Chapter 1: Before You Start

Hardware Specication

Item DS1522+

CPU AMD Ryzen R1600

RAM DDR4 8G

Compatible Drive Type • 3.5"/2.5" SATA x 5

• M.2 2280 NVMe SSD x 2

External Port • USB 3.2 Gen 1 x 2

• eSATA x 2

LAN Port 1GbE (RJ-45) x 4

Network Upgrade Slot Gen3 x2 slot (x2 link) x 1

Size (H x W x D) (mm) 166 x 230 x 223

Weight (kg) 2.7

Agency Certication • FCC Class B • CE Class B • UKCA • BSMI Class B

• EAC • VCCI • CCC • RCM • KC • RoHS Compliant

HDD Hibernation Yes

Scheduled Power On/O󰀨 Yes

Wake on LAN Yes

Environment Requirement

• Line voltage: 100V to 240V AC

• Frequency: 50 / 60Hz

• Operating Temperature: 32 to 104˚F (0 to 40˚C)

• Storage Temperature: -5 to 140˚F (-20 to 60˚C)

• Relative Humidity: 5% to 95% RH

Note: Model specications are subject to change without notice. Please refer to www.synology.com for the latest information.

9Chapter 1: Before You Start

Spare Parts

Visit www.synology.com/products/spare_parts if you need to replace system fans, disk trays, or power supply

units.

Model Name Picture Description

Disk Tray (Type D9) 3.5"/2.5" HDD Tray With Lock

Fan 92*92*25_1 System Fan 92*92*25 mm

Adapter 120W_1 Adapter 120W Level VI

Optional Accessories

With Synology accessories, you can customize your Synology NAS to t di󰀨erent business environments without

worrying about compatibility and stability. Visit www.synology.com/compatibility for more information.

10 Chapter 1: Before You Start

Safety Instructions

Keep away from direct sunlight and away from chemicals. Ensure a stable environment

with no abrupt changes in temperature or humidity.

Place the unit right side up at all times.

Keep the unit away from liquids.

Before cleaning, unplug the power cord. Do not use chemical or aerosol cleaners. Wipe

with damp paper towels.

To prevent the unit from falling over, do not place it on carts or any unstable surfaces.

The power cord must plug into the correct supply voltage. Ensure the supplied AC voltage

is correct and stable.

Warning, electric shock hazard. To remove all electrical current from the device, ensure

that all power cords are disconnected from the power source.

Risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries

appropriately.

Power cord must be plugged into a socket-outlet with earthing connection.

Keep body parts away from moving fan.

This product must be installed by qualied personnel in a restricted access location (like

dedicated equipment rooms, service closets).

Inhaltsverzeichnis

Andere Synology Lagerung Handbücher

Synology

Synology RackStation RS814 Bedienungsanleitung

Synology

Synology DiskStation DS213+ Bedienungsanleitung

Synology

Synology DiskStation DS3612xs Bedienungsanleitung

Synology

Synology CS407 Bedienungsanleitung

Synology

Synology DS109j Bedienungsanleitung

Synology

Synology DiskStation DS1515 Bedienungsanleitung

Synology

Synology DS1821+ Handbuch

Synology

Synology DS509+ Bedienungsanleitung

Synology

Synology DiskStation DS3018xs Handbuch

Synology

Synology DiskStation DS1517+ Handbuch

Synology

Synology RackStation RS3412xs Bedienungsanleitung

Synology

Synology DS1621+ Handbuch

Synology

Synology DiskStation DS409slim Bedienungsanleitung

Synology

Synology DiskStation DS410j Bedienungsanleitung

Synology

Synology NAS DS220+ Handbuch

Synology

Synology DS-106j Bedienungsanleitung

Synology

Synology SA3410 Bedienungsanleitung

Synology

Synology BeeDrive BDS70 Bedienungsanleitung

Synology

Synology DiskStation DS118 Handbuch

Synology

Synology DS-101j Bedienungsanleitung

Synology

Synology DiskStation DS2419+ Handbuch

Synology

Synology DS224+ Bedienungsanleitung

Synology

Synology DiskStation DS218play Handbuch

Synology

Synology DiskStation Series Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

HP P9000 Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung