Synology DiskStation DS414j Bedienungsanleitung

Synology DiskStation DS414j

Quick Installation Guide

Synology_QIG_DS414j_20140211

Table of Contents

Chapter 1: Before You Start

Package Contents .............................................................................................................................................................. 3

Synology DiskStation at a Glance.................................................................................................................................... 4

Safety Instructions .............................................................................................................................................................. 5

Chapter 2: Hardware Setup

Tools and Parts for Drive Installation............................................................................................................................... 6

Install Drives........................................................................................................................................................................ 6

Start Up Your DiskStation.................................................................................................................................................. 9

Chapter 3: Install DSM on DiskStation

Install DSM with Web Assistant...................................................................................................................................... 10

Learn More ........................................................................................................................................................................ 11

Appendix A: Specifications

Appendix B: LED Indicator Table

Chapter

Chapter 1: Before You Start

Thank you for purchasing this Synology product! Before setting up your new DiskStation, please check the

package contents to verify that you have received the items below. Also, make sure to read the safety

instructions carefully to avoid harming yourself or damaging your DiskStation.

Package Contents

Main unit x 1 AC power cord x 1

AC power adapter x 1

Screws for 3.5"

hard drives x 18

Screws for 2.5"

hard drives x 18

Screws for securing

hard disk trays x 8 RJ-45 LAN cable x 1

4 Chapter 1: Before You Start

Synology DiskStation at a Glance

No. Item Location Description

1) Disk Indicator

Front Panel

Displays the status of installed drives. For more information, see "Appendix B:

LED Indicator Table".

2) Power Button

1.Press to power on the DiskStation.

2.To power off the DiskStation, press and hold until you hear a beep sound

and the Power LED starts blinking.

3) LAN Indicator Displays the status of the network connection. For more information, see

"Appendix B: LED Indicator Table".

4) Status Indicator Displays the status of the system. For more information, see "Appendix B:

LED Indicator Table".

5) Kensington

Security Slot

Back Panel

Attach a Kensington lock here.

6) Fan Disposes of excess heat and cools the system. If the fan malfunctions, the

DiskStation will emit a beeping sound.

7) Reset Button

1.Press and hold until you hear a beep sound to restore the default IP

address, DNS server, and passwords for users belonging to the

administrators group.

2.Press and hold until you hear a beep sound, then press and hold again until

you hear three beep sounds to return the DiskStation to “Not Installed”

status so that DiskStation Manager (DSM) can be reinstalled.

8) USB 3.0 Port Connect external hard drives, USB printers, or other USB devices to your

DiskStation here.

9) USB 2.0 Port

10) LAN Port Connect a network cable here.

11) Power Port Connect the AC adapter here.

5 Chapter 1: Before You Start

Safety Instructions

Keep away from

direct sunlight and from chemicals. Make sure the environment does not

experience abrupt changes in temperature or humidity.

Place the product right side up at all times.

Do not place near any liquids.

Before cleaning, unplug the power cord. Wipe

with damp paper towels. Do not use chemical or

aerosol cleaners.

To prevent the unit from falling over, do not place on carts or any unstable surfaces.

The power cord must plug in to the correct

supply voltage. Make sure that the supplied AC

voltage is correct and stable.

To remove all electrical current from the device, ensure that all power cords are disconnected

from the power source.

Risk of explosion if battery is replaced with an incorrect type. Dispose of used batteries

appropriately.

Chapter

Chapter 2: Hardware Setup

Tools and Parts for Drive Installation

A screwdriver

At least one 3.5” or 2.5” SATA drive (please visit www.synology.com for compatible drive models.)

Warning: If you install a drive that contains data, the system will format the drive and erase all existing data. Please

back up any important data before installation.

Install Drives

1 Remove the 4 screws that secure the back cover, and then put the back cover down carefully.

2 Lift the upper case and then place it aside.

7 Chapter 2: Hardware Setup

3 Load drives in the drive trays.

For 3.5” drives: Place the drive in the drive tray. Then tighten the screws to secure the drive in place.

For 2.5” drives: Place the drive in the blue area (shown below) of the drive tray. Turn the tray upside down

and tighten the screws to secure the drive in place.

4 Insert the loaded drive tray into the empty hard drive bay.

Important: Make sure the drive tray is completely inserted. Otherwise, the drive might not function properly.

5 Repeat the steps above to install all prepared drives.

8 Chapter 2: Hardware Setup

6 Drives are numbered as shown below.

For 3.5” drives (only):Secure the drive trays with the screws (for securing drive trays) provided, which is

not required for 2.5” drive.

7 Place the upper case back to its position.

9 Chapter 2: Hardware Setup

8 Close the back cover. Replace and tighten the 4 screws you removed in step 1.

Note:If you want to create a RAID volume, we recommended all installed drives be the same size in order to

optimize drive capacity usage.

Start Up Your DiskStation

1 Connect the AC adapter to the power port of the DiskStation. Connect one end of the AC power cord to the AC

power adapter, and the other to the power outlet.

2 Use the LAN cable to connect the DiskStation to your switch, router, or hub.

3 Press the power button to turn on your DiskStation

Your DiskStation is now online and detectable from a network computer.

Chapter

Chapter 3: Install DSM on DiskStation

After hardware setup is finished, please install DiskStation Manager (DSM) – a browser-based operating system

specifically designed for Synology NAS.

We highly recommend using Synology’s Web Assistant to install DSM with a web browser. Synology Web

Assistant can automatically download the latest software from the Internet and guide you through installation.

Install DSM with Web Assistant

Your DiskStation comes with a built-in tool called Web Assistant to help you configure and install DSM. To use

Web Assistant, please follow the steps below.

1 Power on the DiskStation.

2 Open a web browser on a computer in the same network as the DiskStation.

3 Depending on your network environment, do either of the following:

a If you have Internet access, go to find.synology.com.

b If you do not have Internet access, go to diskstation:5000 and follow the onscreen instructions.

4 Web Assistant will be launched in your web browser. It will search and find your DiskStation within the local

network. The status of your DiskStation should be Not Installed.

5 Click Connect to start the setup process. Follow the onscreen instructions to complete the setup process.

Note:

1. Suggested browsers: Chrome, Firefox.

2. Both the DiskStation and the computer should be in the same local network.

3. Internet connection must be available during DSM installation with Web Assistant.

Inhaltsverzeichnis

Andere Synology Lagerung Handbücher

Synology

Synology NAS DS220+ Handbuch

Synology

Synology DS418play Handbuch

Synology

Synology DS1621xs+ Handbuch

Synology

Synology VS80 Bedienungsanleitung

Synology

Synology DiskStation DS415+ Bedienungsanleitung

Synology

Synology TC500 Bedienungsanleitung

Synology

Synology DX513 Bedienungsanleitung

Synology

Synology RackStation RC18015xs+ Bedienungsanleitung

Synology

Synology DiskStation DS214se Bedienungsanleitung

Synology

Synology DiskStation DS918+ Handbuch

Synology

Synology DS224+ Bedienungsanleitung

Synology

Synology diskstation DS416J Bedienungsanleitung

Synology

Synology DS207 Series Bedienungsanleitung

Synology

Synology DS109j Bedienungsanleitung

Synology

Synology DiskStation DS3018xs Handbuch

Synology

Synology DiskStation DS214 Bedienungsanleitung

Synology

Synology DS1823XS+ Bedienungsanleitung

Synology

Synology DiskStation DS415play Bedienungsanleitung

Synology

Synology DS224+ Bedienungsanleitung

Synology

Synology DiskStation DS214+ Bedienungsanleitung

Synology

Synology DiskStation DS418j Handbuch

Synology

Synology DiskStation DS416play Bedienungsanleitung

Synology

Synology DiskStation DS423 Bedienungsanleitung

Synology

Synology DiskStation DS1517+ Handbuch

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

HP P9000 Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung