Synology RackStation RS422+ Handbuch
Synology NAS RS422+
Hardware Installation Guide
Table of Contents
Chapter 1: Before You Start
Package Contents 3
Synology RS422+ at a Glance 4
System Modes and LED Indicators 5
Other LED Indicators 7
Hardware Specication 8
Spare Parts 9
Optional Accessories 9
Safety Instructions 10
Chapter 2: Hardware Setup
Tools and Parts for Component Installation 11
Install Rack Mounts 11
Install Drives 11
Install Network Upgrade Module 13
Start up Your Synology NAS 14
Chapter 3: Install DSM on Synology NAS
Install DSM with Web Assistant 15
Learn More 15
Synology_HIG_RS422+_20211214
2
Synology NAS RS422+ is an enterprise server consisting of both system hardware and the software operating
system, DiskStation Manager (DSM). This manual will guide you through all conguration aspects of your
RS422+, including the hardware components, setup procedures, and system maintenance.
Note: All images below are for illustrative purposes only, and may dier from the actual product.
Package Contents
Main unit x 1 AC power cord x 1
Rack Mount Kit x 2
Drive tray key x 2
Screws for 3.5" drives x 20 Screws for 2.5" drives x 20 Rack Mount Kit screw x 8
Before You Start 1
Chapter
3
4Chapter 1: Before You Start
Synology RS422+ at a Glance
No. Article Name Location Description
1POWERS Indicator
Front
Displays the power status of your Synology NAS. For more
information, see "System Modes and LED Indicators".
2Power Button
1. Press to power on your Synology NAS.
2. To power o your Synology NAS, press and hold until you hear
a beep sound and the Power LED starts blinking.
3ALERT Indicator Displays warnings regarding fan or temperature. For more
information, see "Other LED Indicators".
4DRIVE Status
Indicator
Displays the status of each drive. For more information, see "Other
LED Indicators".
5Beep O Button Press to deactivate the beep that sounds when a malfunction
occurs.
6STATUS Indicator Displays the status of the system. For more information, see
"System Modes and LED Indicators".
7Drive Tray Lock Lock or unlock drive trays.
8Drive Tray Install drives (hard disk drives or solid state drives) here.
9Fan
Back
Disposes of excess heat and cools the system. If the fan
malfunctions, the Synology NAS will emit a beeping sound.
10 Power Port Connect power cord here.
11 1GbE RJ-45 Port Connect RJ-45 network cable here.
12 Console Port This port is used for manufacturing only.
13 USB 3.2 Gen 1 Port Connect external drives or other USB devices to the Synology
NAS here.
14 Reset Button
1. Mode 1: Press and hold until you hear a beep sound to restore
the IP address, DNS server, and password for the admin
account to default.
2. Mode 2: Press and hold until you hear a beep, release the
button immediately, then press and hold again until you hear
three beeps to return the Synology NAS to "Not Installed" status
so that DiskStation Manager (DSM) can be reinstalled.
For detailed information on how to reset your Synology NAS,
please refer to this article.
15 Network Upgrade Slot Supports the addition of E10G22-T1-Mini network upgrade
module.
5Chapter 1: Before You Start
System Modes and LED Indicators
System Modes and Denitions
There are 7 system modes in Synology NAS. The system modes and their denitions are as below:
System mode Denition
Powering on
Synology NAS is powering on when you press the power button or restarting when
you run operations in DSM. During the boot up process, the device also performs
hardware initialization, such as hardware reset or BIOS initialization.
Shutting down Synology NAS is shutting down when you press the power button or run operations
in DSM.
DSM not ready
DSM is not ready for use. This could either be:
• Synology NAS is powered on, but DSM is not properly installed.
• Synology NAS is currently powering on and initializing services necessary for
DSM to fully function.
• The attached UPS device has insucient power; DSM stops all services to
prevent data loss (enters safe mode).
DSM is ready for use DSM is fully functioning and users can sign in.
Hibernation Synology NAS has been idle for a while and is now in Hibernation mode.
Application
Certain packages/services (e.g., USB Copy and Find me service) while in operation
will control the actions of the LED. After the operation is complete, the LED indicator
will return to its normal state.
Powered o Synology NAS is powered o.
Identify System Modes
You can identify the system mode through the POWER and STATUS LED indicators. Please refer to below table
for more details.
System mode
LED Indicator
POWER STATUS
Green Green Orange
Powering on Blinking O O
Shutting down Blinking Static O
DSM not ready Static Blinking O
DSM is ready for use Static Static O
Hibernation Static O O
Application Static Switching
Powered o O O O
6Chapter 1: Before You Start
Transitions between System Modes
To better understand the transition between system modes, please refer to below examples:
• Powered on with no DSM installed:
Powered o > Powering on > DSM not ready
• Powered on with DSM installed:
Powered o > Powering on > DSM not ready > DSM is ready for use
• Enter hibernation then wake up from hibernation:
DSM is ready for use > Hibernation > DSM is ready for use
• Shutdown Synology NAS:
DSM is ready for use > Shutting down > Powered o
• Power failure with UPS attached:
DSM is ready for use > DSM not ready (due to power failure, DSM enters safe mode) > Shutting down >
Powered o > Powering on (power has recovered, DSM will reboot)> DSM not ready > DSM is ready for use
7Chapter 1: Before You Start
Other LED Indicators
LED Indicator Color Status Description
DRIVE status
Green
Static Drive ready and idle
Blinking Accessing drive
Orange1Static
Locating drive
Drive deactivated by user
Port disabled2
Removing this drive will cause system
damage; this is the only drive with
DSM installed
O No internal Drive
ALERT
Orange Blinking System error3
O System normal
Rear 1GbE LAN
(on right side of jack)
Green
Static
1 Gbps connected
Orange 100 Mbps connected
O 10 Mbps connected/No network
Rear 1GbE LAN
(on left side of jack)
Green
Static Network connected
Blinking Network active
O No network
Note:
1 When the drive LED indicator is red/orange, we recommend you sign in to DSM and go to Storage
Manager > HDD/SSD for more information.
2 Please try to restart your Synology NAS or re-insert the drives, then run the HDD/SSD manufacturer's
diagnostic tool to check the health status of the drives. If you can sign in to DSM, please run the built-in
S.M.A.R.T. test to scan the drives. If the problem remains unresolved, please contact Synology Technical
Support for help.
3 If the ALERT LED continuously blinks orange, this indicates there are system errors such as fan failure,
system overheating, or volume degrade. Please sign in to DSM for detailed information.
8Chapter 1: Before You Start
Hardware Specication
Item RS422+
Compatible Drive Type 2.5"/3.5" SATA x 4
External Port USB 3.2 Gen 1 x 1
LAN Port 1GbE RJ-45 x 2
Network Upgrade Slot Gen3 x2 slot (x2 link) x 1
Size (H x W x D) (mm)
• 44 x 430.5 x 295.5
• 44 x 478 x 327.5 (with server ears)
Weight (kg) 4.38
Supported Client
• Windows 7 onwards
• macOS 10.12 onwards
File System
• Internal: Btrfs, ext4
• External: Btrfs, ext4, ext3, FAT32, NTFS, HFS+, exFAT1
Supported RAID Type
• Basic • JBOD • RAID 0 • RAID 1
• RAID 5 • RAID 6 • RAID 10
Agency Certication • FCC Class A • CE Class A • UKCA • BSMI Class A
• EAC • VCCI • RCM • KC • RoHS Compliant
HDD Hibernation Yes
Scheduled Power On/O Yes
Wake on LAN Yes
Language Localization
Environment Requirement
• Line voltage: 100 V to 240 V AC
• Frequency: 50/60 Hz
• Operating Temperature: 32 to 95˚F (0 to 35˚C)
• Storage Temperature: -5 to 140˚F (-20 to 60˚C)
• Relative Humidity: 5% to 95% RH
Note: Model specications are subject to change without notice. Please refer to www.synology.com for the latest information.
1Support for exFAT can be enabled by purchasing and downloading exFAT Access in Package Center.
9Chapter 1: Before You Start
Spare Parts
Visit www.synology.com/products/spare_parts if you need to replace system fans, disk trays, or power supply
units
Model Name Picture Description
Disk Tray (Type R8) 3.5"/2.5" Drive Tray With Lock
FAN 40*20_3 System Fan 40*40*20 mm
PSU 100W_3 PSU 100W Open Frame
Optional Accessories
With Synology accessories, you can customize your Synology NAS to t dierent business environments without
worrying about compatibility and stability. Visit www.synology.com/compatibility for more information.
10 Chapter 1: Before You Start
Safety Instructions
Keep away from direct sunlight and away from chemicals. Ensure a stable environment
with no abrupt changes in temperature or humidity.
Place the unit right side up at all times.
Keep the unit away from liquids.
Before cleaning, unplug the power cord. Do not use chemical or aerosol cleaners. Wipe
with damp paper towels.
To prevent the unit from falling over, do not place it on carts or any unstable surfaces.
The power cord must plug into the correct supply voltage. Ensure the supplied AC voltage
is correct and stable.
Warning, electric shock hazard. To remove all electrical current from the device, ensure
that all power cords are disconnected from the power source.
Risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries
appropriately.
Power cord must be plugged into a socket-outlet with earthing connection.
Keep body parts away from moving fan.
This product must be installed by qualied personnel in a restricted access location (like
dedicated equipment rooms, service closets).
Inhaltsverzeichnis
Andere Synology Lagerung Handbücher
Synology
Synology Disk Station DS1010+ Handbuch
Synology
Synology DS923+ Bedienungsanleitung
Synology
Synology FlashStation FS3600 Handbuch
Synology
Synology DiskStation DS216j Bedienungsanleitung
Synology
Synology CS-406 Bedienungsanleitung
Synology
Synology DS223 Bedienungsanleitung
Synology
Synology DS411j Bedienungsanleitung
Synology
Synology DiskStation DS423 Bedienungsanleitung
Synology
Synology DiskStation DS218j Handbuch
Synology
Synology DS1823XS+ Bedienungsanleitung
Synology
Synology RS3413xs+ Bedienungsanleitung
Synology
Synology DS-101j Bedienungsanleitung
Synology
Synology RackStation RS3412xs Bedienungsanleitung
Synology
Synology DS720+ Handbuch
Synology
Synology RS1221+ Handbuch
Synology
Synology RS2821RP+ Handbuch
Synology
Synology DiskStation DS920+ Handbuch
Synology
Synology DS207 Series Bedienungsanleitung
Synology
Synology DS109j Bedienungsanleitung
Synology
Synology DS224+ Bedienungsanleitung
Beliebte Lagerung Handbücher anderer Marken
Spectra Logic
Spectra Logic T-Series Spectra T50e Bedienungsanleitung
Panasonic
Panasonic LKM-F931-1 Bedienungsanleitung
Tabernus
Tabernus Enterprise Erase E2400 Bedienungsanleitung
Rocstor
Rocstor COMMANDER 3F series Bedienungsanleitung
HP
HP P9000 Bedienungsanleitung
Western Digital
Western Digital Ultrastar Data60 Bedienungsanleitung