Operation instruction:
Connect cable, E-lock and power supply as this menu,
Then press monitor button and open outdoor monitor screen, enter function menu to adjust the
brightness/contrast for best effect.
Visitors Calls
The visitor presses the CALL button on the outdoor door station, the internal monitor will ring and the
visitor will be seen, the host can talk to the visitor by pressing the TALK button once and the
conversation can last 120s. The host can press the UNLOCK button to open the door, and then press the
MONITOR/TALK button to end current conversation and enter standby mode automatically.
Viewing the outside (60 seconds duration)
Pressing MOINTOR from the installed monitor will switch on the outdoor door station 1 and view of the
outside will be seen on the screen, keep pressing the MONITOR for 1s, and then shift for outdoor station
2. Pressing MONITOR again will cancel the outdoor monitoring.
Choosing melody
Press MELODYbutton under monitor state to select prefer melody.
Indoor units intercom
Press the INTERCOM in the standby state and other indoor monitors will ring, others press the TALK to
talk, and the talk can last 120s. Press the MONITOR/INTERCOM to cancel.
Monitor
Press the MONITOR SWITCH to begin the monitor; press the SHIFTto change the Channel from C1 to C4.
Keep pressing SHIFT for 1s and the 4channels will shift automatically every 5s, you can press the SHIFT
again to cancel the autumnally state. Press MONITOR SWITCH to cancel the monitor state.
Note: in the monitor state, the outdoor camera can call the monitor also, and after the talking it will back to
the monitor state again.
The video out can connectwith the video capture card/DVR for recording or photo.
