System air Menerga TX Bedienungsanleitung

Device type: Menerga TX - ThermoCond

Transport and assembly manual

Read the instructions prior to performing any task!

ME-TM-TX, 2, en_GB

Translation of the original

Menerga GmbH

Alexanderstraße 69

45472 Mülheim an der Ruhr

Telephone: +49 208 9981-0

Fax: +49 208 9981-110

Email: [email protected]

Internet: www.menerga.com

25.08.2022Device type: Menerga TX - ThermoCond2

This transport and assembly manual enables you to handle the

air-conditioning and water-handling device safely and efficiently

(hereinafter referred to as the device).

The transport and assembly manual is an integral part of the

device and must be kept close to the unit and be accessible for

staff at all times.

The staff must have carefully read through and understood this

transport and assembly manual before starting any work. Adher-

ence to all the safety information and instructions specified in this

transport and assembly manual is a basic prerequisite in order to

ensure safety whilst working.

The local regulations for the prevention of accidents and general

safety rules for operational area of the device also apply.

The illustrations in this transport and assembly manual are for the

purpose of basic understanding and may differ from the actual

device delivered.

This manual is protected by copyright and intended exclusively for

use with the device.

The transfer of these instruction to third parties, duplication of

any type and form - including excerpts -, and the exploitation

and/or communication of the contents are prohibited without written

approval from Menerga GmbH except for internal purposes.

Any infringement will render the offender liable for compensation.

All the information and instructions in this manual have been com-

piled with the utmost care, taking into account the applicable stand-

ards and regulations, state-of-the-art technology and our years of

knowledge and experience.

The manufacturer assumes no liability for damages caused by:

nFailure to adhere to these instructions

nImproper use

nUse of unqualified staff

nFailure to adhere to the recognised rules of technology

nUnauthorised alterations

nTechnical modifications to the device

The obligations agreed in the contract of supply, the general terms

and conditions of business, the manufacturer's terms and condi-

tions of supply and the legal regulations valid at the time of com-

pletion of the contract apply.

Scope

Limitation of liability

Supplemental directives

25.08.2022 Device type: Menerga TX - ThermoCond 3

The Menerga customer service team can be reached at the fol-

lowing phone number,

Telephone (DE) +49 208 9981-199

Telephone (GB) +44 121322 0258

or at the following Internet address: www.menerga.com/de/kontakt.

The following documents are valid in addition to this transport and

assembly manual:

nOperating manual

nCooling logbook (optional)

nCircuit diagram

nUnit drawing

nDescription of the device division of device series 18/28

(optional, included as a separate document with the transport

and assembly manual)

nOrder confirmation

Customer service

Applicable documents

Supplemental directives

25.08.2022Device type: Menerga TX - ThermoCond4

Table of contents

1 Safety................................................................................... 7

1.1 Explanation of symbols................................................. 7

1.2 Responsibility of the operator....................................... 8

1.3 Staff requirements....................................................... 10

1.4 Personal safety equipment and clothing..................... 11

2 Transport and storage...................................................... 13

2.1 Delivery....................................................................... 13

2.1.1 Type of packaging.................................................... 13

2.1.2 Symbols on the packaging....................................... 14

2.1.3 Accessories for device installation........................... 15

2.1.4 Checking the delivery.............................................. 16

2.2 Transporting the transport sections............................ 17

2.2.1 Safety notes on transport......................................... 17

2.2.2 Transport by means of fork-lift trucks....................... 19

2.2.3 Transport with the crane.......................................... 22

2.3 Storing transport sections........................................... 23

2.4 Unpacking transport sections..................................... 24

2.5 Dividing the device (device series 18/28/TX).............. 25

3 Placement and assembly................................................. 25

3.1 Safety notes on the placement and assembly............ 25

3.2 On-site requirements.................................................. 26

3.2.1 Requirements for indoor and outdoor installation.... 26

3.2.2 Additional requirements for outdoor units................ 27

3.3 After the assembly...................................................... 28

4 Installation......................................................................... 28

4.1 Safety notes on the installation................................... 28

4.2 Connecting the air duct system.................................. 30

4.3 Connecting the drainage and overflow pipework........ 31

4.4 Connecting the air heater and air cooler..................... 34

4.5 Connecting the pool water condenser........................ 36

4.6 Connecting the building heat pump............................ 37

4.7 Connecting the refrigerant lines.................................. 41

4.8 Connect drainage pipe................................................ 42

4.9 Connecting the energy supply.................................... 43

4.10 After the installation.................................................. 45

5 Removal/disassembly and disposal............................... 46

5.1 Safety during the dismantling and disposal................ 46

5.2 Removal/disassembly................................................. 49

5.3 Disposal...................................................................... 50

6 Index................................................................................... 51

Table of contents

25.08.2022 Device type: Menerga TX - ThermoCond 5

Table of contents

25.08.2022Device type: Menerga TX - ThermoCond6

1 Safety

1.1 Explanation of symbols

DANGER!

This combination of symbol and signal word indi-

cates an immediate dangerous situation, leading to

death or serious injury if not avoided.

WARNING!

This combination of symbol and signal word indi-

cates a potentially dangerous situation which may

cause serious or even fatal injuries if not avoided.

CAUTION!

This combination of symbol and signal word indi-

cates a potentially dangerous situation which may

cause minor or light injuries if not avoided.

NOTICE!

This combination of symbol and signal word

indicates a potentially dangerous situation which

may cause material damage and environmental

damage if not avoided.

ENVIRONMENT!

This combination of symbol and signal word indi-

cates possible hazards for the environment.

This symbol indicates tips and recommendations

and information for efficient and fault-free opera-

tion.

The following symbols are included with safety instructions in order

to make you aware of particular hazards:

Symbol Type of hazard

Warning of dangerous electric

voltage.

Safety notes

Tips and recommendations

Special safety instructions

Explanation of symbols

25.08.2022 Device type: Menerga TX - ThermoCond 7

Symbol Type of hazard

Warning of a potential danger.

The following signs and accentuations are used in this manual to

denote instructions for actions, descriptions of results, bulleted lists

and references to other elements:

Sign Explanation

Step-by-step instructions

ðResults of actions

References to sections in this manual and

other valid documents.

Lists without defined sequence

[Key] Controls (e.g. button, switch)

‘Display’ Screen elements (e.g. buttons, menus, assign-

ment of function keys)

‘Menu è Menu’ Menu path

1.2 Responsibility of the operator

The operator is the person who operates the device himself or

herself or makes it available to a third party for use/application and

is legally responsible for the protection of the user, staff and third

parties during the operation of the product.

The device is used in the commercial or private area. The operator

of the device is subject to the legal obligations for occupational

health and safety.

In addition to the safety notes in these instructions, the regulations

for safety, the prevention of accidents, hygiene and environmental

protection valid for the operational area of the device must be

followed.

In particular the following applies:

nThe operator must clearly regulate and define the responsibili-

ties for transport, placement and assembly, installation, decom-

missioning, disassembly and disposal.

nThe required personal protection equipment must be provided

and used for working on the device.

nMaintenance platforms and safety harnesses must be provided

for working on the device at a device height of over 3 m.

Signs in this manual

User

User obligations

Responsibility of the operator

25.08.2022Device type: Menerga TX - ThermoCond8

nThe country-specific statutory provisions must be followed.

nSuitable equipment must be provided.

nThe device must be properly incorporated into the on-site light-

ning protection concept.

nThe device must be properly incorporated into the on-site fire

prevention concept.

nA lightning arrester must be fitted to devices for outdoor instal-

lation.

nAny electrical connections must be carried out by a qualified

electrician.

nAll safety devices must be checked regularly to make sure that

they are functional and complete.

The device may only be set up and operated in the explosion

protection area as described on the type plate and the order confir-

mation and in accordance with the ATEX guideline.

Changes to the device are only to be carried out by qualified per-

sons. After changes are made, a new conformity evaluation must

be carried out in accordance with the ATEX guideline.

The information in the operating manual of the device that causes

the explosion-risk zone is also to be taken into account.

Repairs and work on the electrical equipment may only be carried

out by a specialist for explosion-risk areas or by the manufacturer.

The obligations of the operator also include the following organisa-

tional measures:

nLabelling of the explosion-risk zones

nClear signs regarding all prohibitions

nCreation of explosion protection documents for every zone

nIssuing of an access prohibition for unauthorised persons

In accordance with DIN 1946, Part 4, the unit is only authorised for

use in buildings and spaces that form part of the health system if

the permit is certified explicitly in the Menerga GmbH order confir-

mation and all hygiene regulations are complied with.

Additional obligations of the oper-

ator when using the device in an

area at risk of explosion

Additional operator duties when

device is used in the health system

Responsibility of the operator

25.08.2022 Device type: Menerga TX - ThermoCond 9

1.3 Staff requirements

WARNING!

Risk due to inadequately qualified people!

Inadequately qualified people may not appreciate

the risks involved in dealing with the device and

expose themselves and others to the risk of

serious or fatal injury.

– All works should only be carried out by people

qualified for those tasks.

– Keep inadequately qualified people away from

the working area.

– The personnel must be familiar with and

must follow the applicable provisions, hygiene

requirements and permissible working proce-

dures from the health sector.

These instructions make reference to the following staff qualifica-

tions for the various task areas:

Crane operator

The crane operator has to be physically and mentally capable of

operating a crane system autonomously within its service bounda-

ries and to perform maintenance tasks on the crane system.

The crane operator has been appropriately trained in operating and

maintaining a crane system and has demonstrated these skills to

the operator.

The crane operator shall reliably undertake the tasks entrusted to

them.

The crane operator will be assigned their tasks by the operator and

must be over 18 years of age.

Fork-lift driver

The fork-lift operator has to submit evidence to the operator

regarding their capability in operating fork-lift trucks, and has sub-

sequently been instructed in writing by the operator in accordance

with the guide.

Refrigeration technician

The refrigeration technician is trained and certified for the specific

task area in which he works and knows the applicable standards

and provisions. The certification includes the necessary compe-

tence in emission prevention, recovery of fluorinated greenhouse

gases and the safe handling of refrigeration equipment of the rele-

vant type and size.

The refrigeration technicians can perform works on refrigeration

systems due to their training and experience and recognise and

avoid possible hazards independently.

Staff requirements

25.08.2022Device type: Menerga TX - ThermoCond10

Inhaltsverzeichnis

Andere System air Luftaufbereiter Handbücher

System air

System air TopVex TX03 Fehlerbehebungshandbuch

System air

System air SAVE VSR 200/B Bedienungsanleitung

System air

System air Topvex SC03 EL Bedienungsanleitung

System air

System air SAVE VTR 500 Handbuch

System air

System air Topvex 1000 R Bedienungsanleitung

System air

System air VSC 200 Bedienungsanleitung

System air

System air DVV Series Bedienungsanleitung

System air

System air Geniox GO Bedienungsanleitung

System air

System air Topvex SoftCooler SR09 Fehlerbehebungshandbuch

System air

System air VR-250 EH/B /3 Bedienungsanleitung

System air

System air SAVE VTR 150/B Bedienungsanleitung

System air

System air Topvex TR04 Handbuch

System air

System air SUE 250EC Bedienungsanleitung

System air

System air Danvent DV Bedienungsanleitung

System air

System air TOPVEX-1000 R Handbuch

System air

System air changeair Freshman Series Bedienungsanleitung

System air

System air FGT010 Bedienungsanleitung

System air

System air Topvex FC Handbuch

System air

System air Rotovex 2400 EL Betriebsanleitung

System air

System air HHCompact Series Betriebsanleitung

System air

System air villavent S-1100 Betriebsanleitung

System air

System air Topvex 1000 R Handbuch

System air

System air Geniox Series Bedienungsanleitung

System air

System air Topvex FR06 Handbuch

Beliebte Luftaufbereiter Handbücher anderer Marken

Klimor

Klimor EVO-S Bedienungsanleitung

Salda

Salda SMARTY XP Leitfaden

BLAUBERG

BLAUBERG KOMFORT Roto EC S400 Bedienungsanleitung

Trenton

Trenton TPLP Series Bedienungsanleitung

Kemper

Kemper CleanAirTower Bedienungsanleitung

Daikin

Daikin DV PTC 14 Series Bedienungsanleitung

Haier

Haier HB2400VA1M20 Bedienungsanleitung

Webasto

Webasto BlueCool A-Series Bedienungsanleitung

RDZ

RDZ DA 701 Technisches Dokument

Carrier

Carrier 39T Abmessungen und Installationsanleitung

Armstrong Air

Armstrong Air BCE5V Series Bedienungsanleitung

ActronAir

ActronAir CAY500T Bedienungsanleitung

Carrier

Carrier 40MBDAQ Bedienungsanleitung

Allied

Allied A93UH1E Bedienungsanleitung

Nortek

Nortek B6VMAI Bedienungsanleitung

TemperZone

TemperZone Econex Pro OPA 1410RLTM4FPQD Wartungs- und Serviceanleitung

RDZ

RDZ WHR 200 Technisches Dokument

AAON

AAON H3 Series Betriebsanleitung

System air menerga TX Bedienungsanleitung

Beliebte Luftaufbereiter Handbücher anderer Marken