Every check and inspection step above is necessary. Danger exists when
riding. Please conform to the above process before riding and operating
this vehicle. The warning label on the surface of the vehicle includes
important safety information. User must fully understand. This vehicle
may cause extreme injury and could even lead to death if the above
mentioned procedure is not followed.
Starting
Following the steps below to start the engine:
1. Park the vehicle on the flat surface.
2. If the engine doesn’t start, please open the choke valve first. Try again.
Close the choke valve, once the engine runs steady.
3. Let warm up before riding. Slowly open throttle after initial startup.
Training
If you don’t understand the information, please contact your local
retailer to learn from a local professional institution or the retailer.
How you operate the vehicle in the first 2 weeks may affect the vehicles
future performance.
During Break-in period, do not run the vehicle at full throttle.
After break-in period, maintain the vehicle according to maintenance.
Keep the vehicle in good condition.
Training is necessary. Improper operation will result in damage to the
vehicle and can result in serious injuries and death.
If the rider has no safety awareness or riding experience, please
operate the vehicle under the supervision of an adult.
Riding
Before operating, please review the safety operating information.
1. Pay attention to the brakes working condition at all times.
2. Riding with only one hand is dangerous and forbidden.
3. Turn the throttle slowly. Never turn it suddenly.
4. Release the throttle and use the brake, to make it slow down.
5. Make sure to use both the front brake and the rear brake work at the
same time when braking.
6. Do not make dangerous movements while riding to ensure safety.
Cleaning
After every ride, the rider should clean the vehicle. Always place the
vehicle on flat surface to clean, and then check.
1. Do not use High pressure air or water. This can damage the vehicle.
