TAG Heuer Connected Bedienungsanleitung

TAG Heuer Connected Watch (Draft)

INSTRUCTIONS AND INTERNATIONAL LIMITED GUARANTEE

PART I. QUICK START GUIDEPART II. INTERNATIONAL WARRANTY

PART I: QUICK START GUIDE - USER MANUAL

Congratulations on your purchase. This document is a quick start guide providing information on your TAG Heuer

connected device basic functions only. For more information and exclusive content, go to : http://customer-

service.tagheuer.com.

Each TAG Heuer Connected Watch is built to meet the most exacting requirements. We paid the very same careful

attention to detail on this connected watch from design, conception to finishing that we constantly do on our watches

for more than 150 years years while partnering with the best partners Google and Intel.

The materials used in our devices make them exceptionally resilient, even when used under the most rigorous

conditions. Before a new TAG Heuer product is launched, it is put through numbers of reliability and quality tests.

With its modern, unique and timeless design, your new TAG Heuer Connected Watch combines Swiss quality

watchmaking tradition with technology. We hope it will bring you complete satisfaction.

MODULARITY

Your TAG Heuer Connected watch presents an inner-modularity aspect enabling you to create various looks by

swapping parts of your watch. To check which additional accessories you can buy to make the most of the inner-

modularity of your product, go to: www.tagheuer.com

Warning: Some accessories taking part into the inner-modularity are small and sharp. Inner-modularity should only

be practiced by adults, instructions below read carefully and steps followed in order. Risk to break or scratch your

product by misreading the information below is high and will void your warranty.

Contact your nearest customer service center if help is needed. List of inner-modular accessories:

View of watch with inner-modularity

DISASSEMBLY PROCESS

Process starting with a fully-assembled product leading to dis-assembly for part replacement purpose.

A. First, you will separate the entity horn-strap (b)-(c) from the module (a).

1. Take your watch fully assembled and lay it down on the opposite side of the power button on a smooth surface so

that you can see the caseback. On one side, place your thumb on the push button located under the horn while

keeping your index and middle fingers on top of the horns. With your other hand, hold the module in the middle.

2. While pressing on the power button located under the horn(b), push down the entity horn- strap(b) -(c)

perpendicularly to dislocate it from the module(a).

3&4. Repeat step 1 & 2 on the opposite side of your module to detach the

horn-strap (b)-(c) entity on the other side.

5. You should now have the module (a) completely detached from the rest

of the accessories (b,c,d).

B. Second, you will detach your horns (b) from your strap (c)

1. Take your horn(b) strap(c)entity by one side. With one hand hold the horns by the side between your thumb and

index. Be careful, those can be sharp. With your other hand hold the strap 

2. . In an opposite movement, pull the horns horizontally in one direction while pulling the strap in the opposite

direction. You should now have your horns and strap separated on one side. 

3&4 Repeat step 1 & 2 on the other horn-strap entity to disassemble it.

5. You should now have your module (a) and horns (b) separated from your strap

and buckle (c) & (d).

C. Third, detach your buckle (d) from your strap(c)

(Relevant only for rubber and calfskin straps, skip this step if your strap is made entirely out of links).

3. Take your strap and press on the push buttons to open the buckle. 

4. Once unclasped, hold the middle part of your opened buckle with one hand and hold the strap part not directly

attached with the part with the push buttons. Rotate the strap part you are holding for it to be perpendicular

to the middle part of buckle you are holding. 

5. After rotating, pull your strap out so that it can be freed from the buckle. You should have only one strap part

remaining attached to your buckle. 

6. Focusing on the buckle part: The goal is to detach the remaining strap from the 

buckle. The detachment can only occur between the end metal part of the strap and the link with “Tag Heuer”

engraving (see fig. 7). The other pieces cannot be separated from one another. Hold the link with “TAG Heuer

engraving” between your index and thumb with one hand while holding with the other hand the strap.

7. Turn the strap inside to have it positioned at 90° with link and push it like you wanted to have your strap leaning

on the inside part of your power button buckle. 

8. You should see the strap metal part of your strap free itself from the link. enabling you to have your strap and

buckle apart. 

9. ASSEMBLY PROCESS 

When starting your assembly process, please make sure you follow the right steps depending at which state your

product is. Read the description of the elements described in the dis-assembly process to understand below terms.

A. Attaching the buckle (d) to the strap (c). (Relevant only for rubber and calfskin straps, skip this step if your strap

is made entirely out of links).

Make sure your folding clasp is opened to ease below steps.

1. strap part with metal ending and insert it into the link with “TAG Heuer” engraving. Check that your strap is in

the right position meaning that the top part of your strap which will be attached to horns later on should be facing

inwards, opposite to the link with “TAG Heuer” engraving.

2&3. Once your strap metal part is in the link of your buckle, make sure all the

parts of your strap, metal strap, link and buckle are aligned.

4&5. Take your loose strap part remaining to attach it to the buckle. You will

insert the end piece into the dedicated end piece. Adjust the angle of insertion for smooth fitting. You can adjust the

size of your strap by sliding this strap part here. As for the strap with metal part, make sure it is inserted in the right

position to welcome horns later on.

6. Close your buckle.B. Assembling your strap (c ) with the horns (b).

1&2. Take your strap by one side and adjust it onto the horns. You should make sure the little balls visible on the top

of horns are hidden by the strap part on top of it and make sure you have heard a “click” noise, insuring you the right

assembly of both elements.

3&4. Repeat operation on the opposite side.

5. You should now have the strap and horns assembled together while the module is on its own.

C. Assembling horn-strap entity (b-c) to the module (a).

1. Placeahorm-strapentityperpendicularlyunderthemoduleandgentlyclip it.

2. Make sure you have heard a “click” noise, insuring you the right assembly of both elements.

3&4. Repeat operation on the opposite side. 7. Your watch should be fully assembled.

COMPATIBILITY

Your TAG Heuer Connected is compatible with phones running Android 4.3+ and iOS 8.2+. Visit g.co/wear check

from your phone to find out if it is compatible. »

CHARGING ACCESSORIES PROVIDED WITH TAG HEUER CONNECTED WATCH

Your TAG Heuer Connected Watch should be provided with a charging cradle, micro USB cable* and wall plug*.

*Design or availability may vary depending on the region.

TURNING ON YOUR TAG HEUER CONNECTED WATCH

1. Connect your watch to a power source2. Press and hold the power button for a few seconds 3. Tap the screen to

begin

4. Tap a language

TURNING OFF YOUR TAG HEUER CONNECTED WATCH

1. Press on power button 

2. Look for settings, tap system and select turn off. 

3. When prompted with message “Turn off: Are you sure?” Tap check mark. 

CHARGING YOUR TAG HEUER CONNECTED WATCH

Before using your watch for the first time, you should charge the battery. Use the charging cradle, micro USB

cable* and wall plug* provided with the watch to charge its battery.

*Design may vary from the one provided with your TAG Heuer Connected Watch.

1. Please insert the micro USB cable into the charging cradle. 

2. Align the shield logo of your power button on the watch with the shield

you can find on the right side of the charging cradle. Magnets on charger will help both items be aligned correctly.

3. Make sure Micro USB cable is plugged into an authorized power source. You will see a charging symbol on the

watch letting you know that it is charging.

Recommendation: Charge your watch every night to get the most of your day.

PAIRING YOUR TAG HEUER CONNECTED WATCH

1. Turn on your watch to follow the instructions on the watch. Tap a language. 

2. Connect your phone to Wi-Fi and turn on Bluetooth. 

3. Launch Android Wear application on your phone and follow the instructions. 

4. A confirmation message on your watch will be displayed once it is paired. 

5. Follow the onscreen instructions on the watch to complete the initial set up.

HOW TO USE YOUR NEW TAG HEUER CONNECTED WATCH

For more information, please go to: http://customer-service.tagheuer.com

“Swipe up “, swipe down will open quick settings.

Add push crown to go back to watch face

« Tap a notification to get more information »

Google Assistant: Use your voice and say “Ok Google” and use a voice

command or use a voice search: Try: “Ok Google show me my steps”. You

can also long press the power button to launch the Google Assistant.

Change your watch face by swiping left or right on the Home screen. Tap

on the one you want to use.

Swipe down from the top of the watch face to get to quick sett

ACCESS TO EXCLUSIVE CONTENT

To access exclusive content, your watch needs to be already paired with your phone. Please refer to “PAIRING

YOUR TAG HEUER CONNECTED WATCH” section for more details.

Download the TAG Heuer Connected app to curate your own collection of authentic watch faces. Become your own

watchmaker and create your own custom watch face designs.

Android users:

Download the TAG Heuer Connected app to your mobile device from the Google Play Store and simply follow the

instructions to create an account, register your watch and manage your profile.

iOS users

An iOS version of the app is in development. Visit http://customer- service.tagheuer.com for the latest details.

MANAGE YOUR ACCOUNT ONLINE

You can also create an account, register your watch and manage your profile on the TAG Heuer Connected website.

Visit https://profile.tagheuerconnected.com/signin

Electrical Safety

Accessories

Use only those accessories approved by TAG Heuer. Using any accessories not approved by TAG Heuer for use

with your TAG Heuer Connected Watch might invalidate any approval or guarantee applicable to your device and or

might result in the TAG Heuer Connected Watch becoming in- operative and dangerous.

Charging accessories

To charge the TAG Heuer Connected Watch, use only approved charging accessories.

Your Watch is provided with the following charging accessories: micro USB cable, charging cradle, wall plug.

Use only approved charging accessories. When a charger is not in use, disconnect it from the power source.

It is important to keep the TAG Heuer Connected Watch and the accessories provided therewith in a well-ventilated

area when charging.

Use the charging accessories provided with the TAG Heuer Connected Watch or any other TAG Heuer

approved charging accessories only from the type of power source indicated on the marking label.

Before you use any power supply, verify that the mains voltage is in accordance with the voltage printed on the

power supply.

Do not overload power outlet, extension cords or convenience receptacles because this might re- sult in a risk of re

or electric shock. To reduce the risk of damage to the cord or the wall charger, pull the wall charger rather than the

cord when you disconnect the charging accessory from the power outlet or convenience receptacle.

Using damaged TAG Heuer Connected Watch charging accessories, or charging when moisture is present, can cause

re, electric shock, injury, or damage to the user or the TAG Heuer Connected.

Watch or other property. Be sure the TAG Heuer Connected Watch and the charging accessories are dry before

charging. When you use the charging accessories to charge the TAG Heuer Connected Watch, make sure that the

USB plug is fully inserted into the adapter before you plug the adapter into a power outlet. Avoid charging the TAG

Heuer Connected Watch in direct sunlight. Do not wear the TAG Heuer Connected Watch while it is charging.

Avoid prolonged skin contact with the connector when the cable is plugged into a power source because it may

cause discomfort or injury. Sleeping or sitting on the connector should be avoided.

In addition to the above:

Do not expose the charger to water while in use; this may cause the charger and the watch to fail. 

Carefully insert the USB cable into the charger base, forcing the cable in the wrong direction will damage the

charger. 

It is recommended to charge the watch in a cool place, in order to prevent overheating of the watch. 

It is not recommended to charge the watch in a place where there is direct sunlight on the watch, as this may cause

overheating. 

When the watch is placed on the charger, and the charger is plugged into a wall, a charging screen will be

displayed on the watch face, indicating the remaining time to fully charge the battery. 

It is recommended to remove the watch from the charger once it is fully-charged. 

If the watch fails to charge, check that the wall plug is fully inserted into the wall outlet, the USB cable is rmly

attached to the charger, and the watch is properly placed on the charger. 

If the watch still does not charge, make sure that there is no dirt or obstruction on the charger’s pins and make sure

the back of the watch is clean. 

The charger contains a small magnet to ensure proper alignment and attachment of the watch to the charger. Please

keep the charger away from metal. 

Battery safety Your TAG Heuer Connected Watch contains a built-in battery that is not replaceable. Do not at-

tempt to replace your product’s battery (for information on the recycling of the battery, please refer to section C-2,

below). 

In any event:

.Do not expose the battery to re or other external heat sources, such as hot plates, stove tops, space heaters or

ovens, as this could cause re or explosion. 

.Do not dispose of batteries in a re. 

.Never use any charger or battery that is damaged in any way. Use the battery only for intended purposes. Do not

short-circuit the battery. 

.Do not leave the battery in hot or cold places. 

Interaction with the environment

Interference with electronic equipment and magnetic characteristics



Your TAG Heuer Connected Watch, as any radio-transmitting equipment, may interfere with other electronic

devices. Switch o your device on airplanes or any place where it is requested (hospitals, gas station, etc.). In any

case, make sure you are using your device where it is authorized for use and in an authorized manner. In particular,

your TAG Heuer Connected Watch may interfere with pacemakers, defibrillators, or other medical devices.

Maintain a safe distance of separation between your medical device and the TAG Heuer Connected Watch and

accessories. Consult your physician and medical device manufacturer for information specific to your medical

device. Stop using the TAG Heuer Connected Watch and its accessories if you suspect they are interfering with your

pacemaker, defibrillator, or any other medical device. Keep key cards and credit cards away from the TAG Heuer

Connected Watch and its accessories. To disable the watch’s radio (Bluetooth and Wi-Fi) functions, please follow

the following stages:

If your screen is dim, touch the screen to wake up the watch; 

Swipe down from the top of the screen; 

Swipe from right to left until you see Settings , then touch it; 

Touch Wi-Fi or Bluetooth settings depending on which you want to turn off; 

If Wi-Fi or Bluetooth is set to Automatic, touch the little icon listed next to either Wi-Fi or Bluetooth to

turn it o or disable. 

Dangerous areas 

Charging or using the TAG Heuer Connected Watch in any area with a potentially explosive atmosphere, such as in

areas where the air contains high levels of flammable chemicals, vapors, or particles (such as grain, dust, or metal

powders), may be hazardous. Obey all signs and instructions. 

Operating and storage temperatures

The normal operating temperature of the TAG Heuer Connected Watch is from 0 to 45° C (32 to 113° F).

The TAG Heuer Connected Watch can be damaged and battery life shortened if stored or operated outside of these

temperature ranges. Avoid exposing the TAG Heuer Connected Watch to dramatic changes in temperature or

humidity. If the interior temperature of the TAG Heuer Connected Watch exceeds normal operating temperatures

(for example, in a hot car or in direct sunlight for extended periods of time), you may experience the following as it

attempts to regulate its temperature:

•Charging may slow or stop; 

•The display may dim; 

•Some data transfer may be paused or delayed. 

The TAG Heuer Connected Watch and its accessories comply with applicable surface temperature standards

and limits. However, even within these limits, sustained contact with warm surfaces for long periods of time may

cause discomfort or injury. The TAG Heuer Connected Watch and its accessories will become warm when plugged

into a power source. Use common sense to avoid situations where your skin is in contact with the TAG Heuer

Connected Watch and/or its accessories for long periods of time when they are plugged in. For example, while the

TAG Heuer Connected Watch is charging or while its accessories are plugged into a power source, do not sleep on

them or place them under a blanket, pillow, or your body. Take special care if you have a physical condition that a

ects your ability to detect heat against the body. Remove the TAG Heuer Connected Watch if it becomes

uncomfortably warm. 

Maintenance and disposal 1- Cleaning and repair Keep the TAG Heuer Connected Watch clean and dry. Dry

the TAG Heuer Connected Watch thoroughly if exposed to fresh water. Clean the TAG Heuer Connected Watch if it

comes in contact with anything that may cause stains, or other damage, such as dirt or sand, makeup, ink, soap,

detergent, acids or acidic foods, or comes in contact with liquids other than fresh water, including those that may

lead to skin irritation such as: sweat, salt water, soapy water, pool water, perfume, insect repellent, lotions,

sunscreen, oil, adhesive remover, hair dye, or solvents. The TAG Heuer Connected Watch may vary or fade over

time. The following things are not recommended in the care of your TAG Heuer Connected Watch: 

• Do not clean the TAG Heuer Connected Watch while it is charging.

•Do not dry the TAG Heuer Connected Watch or the bands using any external heat source (for example, a hair

dryer). 

•Do not use cleaning products or compressed air when cleaning your TAG Heuer Connected Watch. 

Built-in battery precautions and information

Your Tag Heuer Connected Watch features a built-in rechargeable battery, which is not replaceable or removable by

the user. 

Do not attempt to replace or remove your Watch’s battery by yourself. 

Tampering with your product, or attempting to open it, will void the guarantee and may result in a safety hazard.

For any handling of the battery please contact your TAG Heuer distributor 3- Electronic or electric equipment

and battery disposal 

Your TAG Heuer Connected Watch, its accessories and its battery contain hazardous sub- stances. They

must not be disposed of as unsorted household waste.



They are subject to speci c local regulations. In particular,

as the TAG Heuer Connected Watch and its accessories were placed on the market after 13 August 2005, they are

subject, in the European Union, to Directive 2012/19/EU on waste electrical and electronic equipment (WEEE); in

addition, the battery contained in your TAG Heuer Connected Watch is subject to Directive 2006/66/EC on batteries

and accumulators and waste batteries and accumulators. The above-mentioned crossed- out wheeled bin symbols

indicate that the TAG Heuer Connected Watch, its battery and its accessories are subject to these regulations.

The above mentioned equipment and battery must be collected separately. The correct disposal of your old

equipment, batteries or accumulators will help to prevent potential negative consequences for the environment,

animal and human health. By recycling, reusing the materials or other forms of utilizing old devices, you are making

an important contribution to protecting our environment.

Do not dispose of the above mentioned equipment in a fire.

For more detailed information about disposal of your used electric or electronic equipment, bat- teries and

accumulators, please contact:

•your city office; 

•the waste disposal service; or 

•the shop where you purchased the product. 

Consumers are, depending on the domestic legislation, encouraged or obliged by law to return electrical and

electronic devices at the end of their service lives to the public collecting points set up for this purpose or to the

point of sale. Specific modalities are defined by the national laws of each country. 

Exposure to Radio Frequency Energy and Specific Absorption Rate Information This device is a radio

transmitter and receiver that uses an internal antenna to send and receive low levels of ra- dio frequency (RF)

energy for data communications. The device emits RF energy below the published limits when operating in its

maximum output power mode and when used with TAG Heuer authorized accessories. To comply with RF exposure

compliance requirements, the device should not be used in other configurations. This device must not be co-located

or operated in conjunction with any other transmitter or antenna. The TAG Heuer Connected Watch meets the EU,

US and Canada requirements for exposure to radio waves. It is designed and manufactured not to exceed the

emission limits for exposure to RF energy set by the Federal Communications Commission (FCC) of the US

Government, Industry Canada (IC) of the Canadian Government, the French Government and recommended by the

Council of the European Union when used as directed in these Instructions, to ensure the safety of all per- sons,

regardless of age or condition. The exposure standard for radio electrical devices uses a unit of measurement

known as the Specific Absorption Rate (SAR). Tests for SAR are conducted using standard operating positions

with the device trans- mitting at its highest certified power level in all tested frequency bands. Please note that: 

•In the United States and Canada, the allowable SAR limits are the following: 1.6 W/kg (averaged over any 1

gram of tissue) for the head, neck and trunk; 4 W/kg (averaged over any 10 grams of tissue) for limbs; 

•In the EU, the recommended SAR limits are the following: 2 W/kg (averaged over any 10 grams of tissue) for

the head and trunk; 4 W/kg (averaged over any 10 grams of tissue) for limbs (these are legal requirements

in France). 

The SAR limit recommended by the ICNIRP (International Commission for protection against non-ion- izing

radiation) is 2W/kg.

Additionally, the SAR limit that applies to residents of countries / regions that have adopted the SAR limit

recommended by the IEEE (Institute of Electrical and Electronics Engineers), including the US, is 1.6 W/kg

averaged over one (1) gram of human tissue.

The highest SAR value for your TAG Heuer Connected Watch (at the device’s highest possible power level):

Inhaltsverzeichnis

Andere TAG Heuer Betrachten Handbücher

TAG Heuer

TAG Heuer Pocket Pro HL400-P Bedienungsanleitung

TAG Heuer

TAG Heuer Formula 1 CAH1110.BT0714 Bedienungsanleitung

TAG Heuer

TAG Heuer Rally-Master Bedienungsanleitung

TAG Heuer

TAG Heuer AQUARACER CALIBRE S REGATTA Bedienungsanleitung

TAG Heuer

TAG Heuer Calibre 17 Produktinformationsblatt

TAG Heuer

TAG Heuer Formula 1 Produktinformationsblatt

TAG Heuer

TAG Heuer POCKET PRO HL400-R RALLY Bedienungsanleitung

TAG Heuer

TAG Heuer SAR8A80 Produktinformationsblatt

TAG Heuer

TAG Heuer Connected Series Produktinformationsblatt

TAG Heuer

TAG Heuer SBG8A Produktinformationsblatt

TAG Heuer

TAG Heuer CALIBRE 18 Series Produktinformationsblatt

TAG Heuer

TAG Heuer SBR8A Produktinformationsblatt

TAG Heuer

TAG Heuer 185 Kurzanleitung

TAG Heuer

TAG Heuer CONNECTED MODULAR SBF8A Bedienungsanleitung

TAG Heuer

TAG Heuer CONNECTED MODULAR SBF8A Bedienungsanleitung

TAG Heuer

TAG Heuer PROCKET PRO HL400-J JUMPING Bedienungsanleitung

TAG Heuer

TAG Heuer CALIBRE 8 Produktinformationsblatt

TAG Heuer

TAG Heuer CARRERA Betriebsanleitung

TAG Heuer

TAG Heuer SBR8A Produktinformationsblatt

TAG Heuer

TAG Heuer Connected Series Produktinformationsblatt

TAG Heuer

TAG Heuer Aquaracer 500 M Produktinformationsblatt

TAG Heuer

TAG Heuer HEUER Vintage Bedienungsanleitung

TAG Heuer

TAG Heuer Microtimer Betriebsanleitung

TAG Heuer

TAG Heuer POCKET PRO HL400-W Bedienungsanleitung

Beliebte Betrachten Handbücher anderer Marken

Pandora

Pandora WATCH2 Bedienungsanleitung

Casio

Casio QW-4343 Bedienungsanleitung

Suunto

Suunto X6 Bedienungsanleitung

Seiko

Seiko N830 Bedienungsanleitung

MotionX

MotionX 365 Bedienungsanleitung

Garmin

Garmin VENU SQ 2 Bedienungsanleitung

QCY

QCY Watch GTC Bedienungsanleitung

Canyon

Canyon Cindy CNE-KW41WP Bedienungsanleitung

Esq

Esq Watches Installationsanleitung

Crane

Crane AA5-CDSM-3A Bedienungsanleitung

Timex

Timex W-214 Bedienungsanleitung

DETOMASO

DETOMASO MATERA Bedienungsanleitung

Geemarc

Geemarc Watch N Shake Bedienungsanleitung

LORUS

LORUS W590 Bedienungsanleitung

STENLILLE

STENLILLE Actío Bedienungsanleitung

Casio

Casio 5594 Bedienungsanleitung

Sinn

Sinn HUNTER'S WATCH 3. Edition Bedienungsanleitung

Slazenger

Slazenger SLZ800 Bedienungsanleitung