Tait TP9100 Bedienungsanleitung

Chassis engraving will void warranty i

Chassis engraving will void warranty

Chassis engraving will void

warranty

Caution: Engraving the chassis can significantly reduce

its mechanical strength and will void any warranty. If the

chassis has been engraved, it must be replaced.

To our European customers

Tait Electronics Limited is an environmentally

responsible company which supports waste

minimization and material recovery. The European

Union’s Waste Electrical and Electronic Equipment

Directive requires that this product be disposed of

separately from the general waste stream when its

service life is over. Please be environmentally responsible

and dispose through the original supplier, your local

municipal waste “separate collection” service, or

contact Tait Electronics Limited.

ii For your safety

For your safety

Before using your radio, please read the following

important safety and compliance information.

Radio frequency exposure information

For your own safety and to ensure you comply with the

Federal Communication Commission’s (FCC) radio

frequency (RF) exposure guidelines, please read the

following information before using this radio.

Using this radio

You should use this radio only for work-related

purposes (it is not authorized for any other use) and if

you are fully aware of, and can exercise control over,

your exposure to RF energy. To prevent exceeding FCC

RF exposure limits, you must control the amount and

duration of RF that you and other people are

exposed to.

It is also important that you:

QDo not remove the RF Exposure label from

the radio.

QEnsure this RF exposure information accompanies

the radio when it is transferred to other users.

QDo not use the radio if you do not adhere to the

guidelines on controlling your exposure to RF.

Controlling your exposure to RF energy

This radio emits radio frequency (RF) energy or radio

waves primarily when calls are made. RF is a form of

electromagnetic energy (as is sunlight), and there are

recommended levels of maximum RF exposure.

To control your exposure to RF and comply with the

maximum exposure limits for occupational/controlled

environments, follow these guidelines:

QDo not talk (transmit) on the radio more than the

rated transmit duty cycle. This is important because

For your safety iii

For your safety

the radio radiates more energy when it is transmit-

ting than when it is receiving.

QWhen listening and talking on the radio, hold it

upright in front of your face so that it is at least one

inch (2.5 cm) away from any part of your face.

Keeping the radio at the recommended distance is

important because exposure to RF decreases rapidly

the further away the antenna is from your body.

QKeep the antenna at least one inch (2.5 cm) from

your face at all times.

QIf you wear your radio, you must always put it in a

carrying accessory that has been specifically

approved by Tait for this radio. Using non-approved

body-worn accessories may mean you expose your-

self to higher levels of RF than recommended by the

FCC’s occupational/controlled environment RF

exposure limits.

QEnsure you only use Tait-approved antennas, batter-

ies, and accessories.

For more information on what RF energy is and how to

control your exposure to it, visit the FCC website at

http://www.fcc.gov/oet/rfsafety/rf-faqs.html.

Compliance with RF energy exposure

standards

This two-way radio complies with these RF energy

exposure standards and guidelines:

QUnited States Federal Communications Commis-

sion, Code of Federal Regulations; 47 CFR §§

1.1307, 1.1310, and 2.1093.

QAmerican National Standards Institute (ANSI) / Insti-

tute of Electrical and Electronic Engineers

(IEEE) C95.1-1992

QInstitute of Electrical and Electronic Engineers (IEEE)

C95.1-1999 Edition.

iv For your safety

For your safety

This radio complies with the IEEE and ICNIRP exposure

limits for occupational/controlled RF exposure

environments at operating duty factors of up to 50%

transmitting (even though the approved batteries for

this radio are rated for a 5-5-90 duty factor (5% talk-

5% listen-90% standby)).

Radio frequency emissions limits in

the USA

Part 15 of the FCC Rules imposes RF emission limits

on receivers.

This radio complies with Part 15 of the FCC Rules.

Operation is subject to the condition that this device

does not cause harmful interference.

Unapproved modifications or changes

to radio

The radio is designed to satisfy the applicable

compliance regulations. Do not make modifications or

changes to the radio that are not expressly approved by

Tait Electronics Ltd. Failure to do so could invalidate

compliance requirements and void the user’s authority

to operate the radio.

USA public safety bands

(764–776MHz and 794–806MHz)

Part 90R of the FCC Title 47 of the Code of Federal

Regulations (CFR) deals with the use of frequencies in

the 764 to 776MHz and 794 to 806MHz bands.

Low-power channels

This radio complies with §90.531 (b) (3) and

§90.531 (b) (4) of 47 CFR. These sections state that only

low-power transmission is permitted on the

following channels:

QRegional Planning channels, as defined in

§90.531 (b) (3).

QItinerant channels, as defined in §90.531 (b) (4).

For your safety v

For your safety

Use of encryption

This radio complies with §90.553 (a) of 47 CFR. This

states that:

QEncryption is not permitted on the nationwide

Interoperability calling channels. These channels are

defined in §90.531 (b) (1) (ii).

QRadios using encryption must have a readily accessi-

ble switch or control to allow the radio user to dis-

able encryption.

Frequency band reserved for

distress beacons

Frequency band 406 to 406.1 MHz is reserved for use by

distress beacons. Transmissions should not be made

within this frequency band.

Safe radio operation

Warning: Switch off the radio:

Qat petrol filling stations or near flammable liquids

or gases

Qin the vicinity of explosive devices and

blasting zones

Qbefore boarding an aircraft. Using your radio

while in the air is not permitted.

Using a handheld microphone or a radio while driving a

vehicle may violate the laws and legislation that apply in

your country or state. Please check the vehicle

regulations in your area.

vi For your safety

For your safety

Interference with electronic devices

Some electronic devices may be prone to malfunction

due to the lack of protection from RF energy that is

present when your radio is transmitting.

Examples of electronic devices that may be affected by

RF energy are:

Qvehicular electronic systems such as fuel injection,

anti-skid brakes, and cruise control

Qmedical devices such as hearing aids

and pacemakers

Qmedical equipment in hospitals or health

care facilities.

Consult the manufacturer (or its representative) of the

equipment to determine whether these electronic

circuits will perform normally when the radio

is transmitting.

Menu map vii

Menu map

viii Radio controls

Radio controls

For more information about the radio controls, see

“About your radio” on page 7.

display

PTT key

(press-to-talk)

scroll keys

alphanumeric

keys

speaker /

microphone

power / volume

control

channel selector

status LED

right selection key

left selection key

top key

(function key 3)

3-way selector

control

side keys

(function

keys 1 & 2)

Andere Handbücher für TP9100

Inhaltsverzeichnis

Andere Tait Tragbares Radio Handbücher

Tait

Tait TP9300 Bedienungsanleitung

Tait

Tait 9400 Bedienungsanleitung

Tait

Tait TP9360 Bedienungsanleitung

Tait

Tait TM9100 Bedienungsanleitung

Tait

Tait orca Bedienungsanleitung

Tait

Tait TP9160 Bedienungsanleitung

Tait

Tait Orca 5010 Bedienungsanleitung

Tait

Tait Orca 5000 Bedienungsanleitung

Tait

Tait TP8110 Bedienungsanleitung

Tait

Tait TP9310 Bedienungsanleitung

Tait

Tait TP9100 Bedienungsanleitung

Tait

Tait TP9500 Bedienungsanleitung

Tait

Tait Orca 5035 Bedienungsanleitung

Tait

Tait TP9300 Bedienungsanleitung

Tait

Tait TP9100 Series P25 Bedienungsanleitung

Tait

Tait TP9100 Bedienungsanleitung

Tait

Tait TP9400 Series P25 Bedienungsanleitung

Tait

Tait 5011 Bedienungsanleitung

Tait

Tait TP9600 Bedienungsanleitung

Tait

Tait TP9100 Gebrauchs- und Pflegehandbuch

Tait

Tait TP9300 Series DMR Bedienungsanleitung

Tait

Tait TP3000 Bedienungsanleitung

Tait

Tait TP9300 Bedienungsanleitung

Tait

Tait Orca 5010 Bedienungsanleitung

Beliebte Tragbares Radio Handbücher anderer Marken

Telefunken

Telefunken P5 Bedienungsanleitung

Lafayette

Lafayette Guardian 5500 Bedienungsanleitung

Sailor

Sailor SP3300 Bedienungsanleitung

Matra Nortel

Matra Nortel MC 6500 Bedienungsanleitung

Hytera

Hytera PD362i Bedienungsanleitung

Vertex Standard

Vertex Standard VX-P920 Series Bedienungsanleitung

Roberts

Roberts Ecologic 3 Bedienungsanleitung

LENCO

LENCO IPD-5100 Bedienungsanleitung

Baofeng

Baofeng BF-82 Bedienungsanleitung

Trevi

Trevi RA 764 Bedienungsanleitung

M/A-Com

M/A-Com P5100 Series Bedienungsanleitung

Elta

Elta 6699 Bedienungsanleitung

PURE

PURE ONE classic Series II Bedienungsanleitung

Teac

Teac PR130 Bedienungsanleitung

Philips

Philips AE6370 Bedienungsanleitung

Simoco

Simoco SRP9170 Bedienungsanleitung

Audiovox

Audiovox FR14 Bedienungsanleitung

Roberts

Roberts R9999 Bedienungsanleitung