Tait TD9300 Bedienungsanleitung

DRAFT 3

TD9300 Data Terminal

Installation Manual

MNE-00003-01 · Issue 1 · March 2015

DRAFT

2TD9300 Installation Manual

Contact Information

Tait Communications

Corporate Head Office

Tait Limited

P.O. Box 1645

Christchurch

New Zealand

For the address and telephone number of regional

offices, refer to our website:www.taitradio.com

All information contained in this manual is the

This manual may not, in whole or in part, be copied,

photocopied, reproduced, translated, stored, or reduced

to any electronic medium or machine-readable form,

without prior written permission from Tait Limited.

The words TAIT, TAITNET and the TAIT logo are

registered trademarks of Tait Limited.

All trade names referenced are the service mark,

trademark or registered trademark of the

respective manufacturers.

Disclaimer

There are no warranties extended or granted by this

document. Tait Limited accepts no responsibility for

damage arising from use of the information contained

in the document or of the equipment and software it

describes. It is the responsibility of the user to ensure

that use of such information, equipment and software

complies with the laws, rules and regulations of the

applicable jurisdictions.

Enquiries and Comments

If you have any enquiries regarding this document, or

any comments, suggestions and notifications of errors,

please contact your regional Tait office.

Updates of Manual and Equipment

In the interests of improving the performance,

reliability or servicing of the equipment, Tait Limited

reserves the right to update the equipment or this

document or both without prior notice.

Intellectual Property Rights

This product may be protected by one or more patents

or designs of Tait Limited together with their

international equivalents, pending patent or design

applications, and registered trade marks: NZ409837,

NZ409838, NZ415277, NZ415278, NZ508806,

NZ516280/NZ519742, NZ521450, NZ524369,

NZ524378, NZ524509, NZ524537, NZ530819,

NZ534475, NZ547713, NZ569985, NZ577009,

NZ579051, NZ579364, NZ584534, NZ586889,

NZ592624, NZ593887, NZ593888, NZ600346,

NZ607046, NZ610426, NZ610563, NZ615954,

NZ625717, NZ628342, NZ629167, NZ630718,

NZ700387, NZ700908, NZ70177, AU2004216984,

AU321864, AU321868, AU339127, AU339391,

CN1031871, CN1070368, CN200930004199.5,

CN200930004200.4, CN200930009301.0,

EU000915475-0001, EU000915475-0002,

GB2413445, US 8301682, US13/542147, US13/

896969, US14/032876, US14/495334, US29/401234,

US29/401235, US5745840, US640974, US640977,

US7411461, US7758996, US7937661, US8902804.

This product may also be made under license under one

or more of the following U.S. Patents: 5,146,497,

5,148,482, 5,164,986, 5,185,795, 5,185,796,

5,271,017, 5,377,229 and 5,502,767.

The AMBE+2™ voice coding Technology embodied

in this product is protected by intellectual property

rights including patent rights, copyrights and trade

secrets of Digital Voice Systems, Inc. This voice

coding Technology is licensed solely for use within this

Communications Equipment. The user of this

Technology is explicitly prohibited from attempting to

decompile, reverse engineer, or disassemble the Object

Code, or in any other way convert the Object Code into

a human-readable form. Protected by U.S. Patents

5,870,405, 5,826,222, 5,754,974, 5,701,390,

5,715,365, 5,649,050, 5,630,011, 5,581,656, 5,517,511,

5,491,772, 5,247,579, 5,226,084 and 5,195,166.

Environmental Responsibilities

Tait Limited is an environmentally

responsible company which supports

waste minimization, material recovery and

restrictions in the use of hazardous

materials.

The European Union’s Waste Electrical and Electronic

Equipment (WEEE) Directive requires that this

product be disposed of separately from the general

waste stream when its service life is over. For more

information about how to dispose of your unwanted

Tait product, visit the Tait WEEE website at

www.taitradio.com/weee. Please be environmentally

responsible and dispose through the original supplier,

or contact Tait Limited.

Tait Limited also complies with the Restriction of the

Use of Certain Hazardous Substances in Electrical and

Electronic Equipment (RoHS) Directive in the

European Union.

In China, we comply with the Measures for

Administration of the Pollution Control of Electronic

Information Products. We will comply with

environmental requirements in other markets as they

are introduced.

DRAFT

TD9300 Installation Manual 3

Contents

Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Scope of Manual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Document Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Associated Documentation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Publication Record . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

1 Safety and Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1.1 Personal Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1.1.1 Explosive Environments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1.1.2 Proximity to RF Transmissions / A proximité des émissions RF . . . . . . 7

1.1.3 LED Safety (EN60825-1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

1.2 Equipment Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

1.2.1 Installation and Servicing Personnel . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

1.2.2 Antenna Load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

1.2.3 Anti-tampering Devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

1.2.4 ESD Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

1.3 Environmental Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

1.3.1 Operating Temperature Range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

1.3.2 Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

1.3.3 Dust and Dirt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

1.3.4 Grounding and Lightning Protection. . . . . . . . . . . . . . . . . . . . . . . . . . . 11

1.3.5 Equipment Ventilation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

1.4 Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

1.4.1 Distress Frequencies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

1.4.2 Compliance Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

1.4.3 Radio Frequency Emissions Limits in the USA . . . . . . . . . . . . . . . . . . 12

1.4.4 Radio Frequency Emissions Limits in Canada . . . . . . . . . . . . . . . . . . . 12

1.4.5 Unauthorized Modifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

2 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

3 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

4 Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

4.1 Overview of Inputs and Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

4.2 Interface Pin Allocations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

4.3 Connecting DC Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

4.4 System Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

DRAFT

4TD9300 Installation Manual

5 Getting Started. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

5.1 Confirming Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

6 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Serial Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Ethernet Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Digital Inputs and Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Compliance Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Tait Software License Agreement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

DRAFT

TD9300 Installation Manual 5

Preface

Scope of Manual

This manual describes the TD9300 data terminal. The manual is intended

for use by experienced technicians familiar with installing and operating

radio network equipment. It includes information on installing the TD9300

in a TN9300 DMR trunked network.

Document Conventions

The TD9300 data terminal has a web interface with an accordion menu on

the left side of the screen. “Configuration > Users” means click

Configuration in the top-level menu, then click Users in the expanded

Configuration menu tree to display its page.

Within this manual, four types of alerts may be given to the reader. The

following paragraphs illustrate each type of alert and its associated symbol.

Warning This alert is used when there is a hazardous situation

which, if not avoided, could result in death or serious injury.

Caution This alert is used when there is a hazardous situation which,

if not avoided, could result in minor or moderate injury.

Notice This alert is used to highlight information that is required to

ensure procedures are performed correctly. Incorrectly performed pro-

cedures could result in equipment damage or malfunction.

This icon is used to draw your attention to information that may

improve your understanding of the equipment or procedure.

Rewrite this when UI is

finalised.

DRAFT

6TD9300 Installation Manual

Associated Documentation

DMR System Manual (MNB-00003-xx)

DMR Node Controller Installation Manual (MNB-00001-xx)

DMR Node Controller online Help.

The characters xx represent the issue number of the documentation.

Technical notes are published from time to time to describe applications for

Tait products, to provide technical details not included in manuals, and to

offer solutions for any problems that arise. Look for new or updated

technical notes on the Tait Technical Resources website.

All available product documentation is provided on the Product CDs

supplied with individual items of equipment. Updates may also be

published on the Tait Technical Resources website. Printed copies of the

manuals are available on request.

Publication Record

Update as needed

Issue Publication Date Description

1 March 2015 First release

DRAFT

TD9300 Installation Manual Safety and Regulatory Information 7

1 Safety and Regulatory Information

1.1 Personal Safety

1.1.1 Explosive Environments

Warning Do not operate the equipment near electrical blasting

caps or in an explosive atmosphere. Operating the equipment in

these environments is a definite safety hazard.

1.1.2 Proximity to RF Transmissions / A proximité des émissions RF

To comply with the RF Field Limits for Devices Used by the General

Public for (Uncontrolled Environment)a, a safe separation distance of at

least 3.3 feet (1 metre) from the antenna system should be maintained.

This figure is calculated for a typical installation, employing one 25W

transmitter. Other configurations, including installations at

multi-transmitter sites, must be installed so that they comply with the

relevant RF exposure standards.

a. Reference Standards

Health Canada’s Safety Code 6: Limits of Human Exposure to

Radiofrequency Electromagnetic Energy in the Frequency Range from

3kHz to 300GHz

USA Federal Communications Commission OET bulletin 65

(47CFR 1.1310)

IEEE C95.1 2005: Standard for Safety Levels with Respect to Human

Exposure to Radio Frequency Electromagnetic Fields, 3kHz to

300GHz

Pour respecter les limites imposées au champ RF au niveau des

équipements utilisés par le grand public (environnement non contrôlé)a,

une distance de séparation de sécurité d’au moins 1 mètre du bloc

d’antenne devrait être observée.

Ce nombre est calculé pour une installation typique, ayant un émetteur de

25W. D’autres configurations, incluant les installations ayant des sites de

plusieurs émetteurs, doivent être installées de façon à se conformer aux

normes pertinentes des expositions RF.

DRAFT

8 Safety and Regulatory Information TD9300 Installation Manual

1.1.3 LED Safety (EN60825-1)

This equipment contains Class 1 LED Products.

a. Normes de référence

Code de sécurité 6 de Santé Canada: Limites d'exposition humaine à

l’énergie électromagnétique radioélectrique dans la gamme de

fréquences de 3kHz à 300GHz

Commission fédérale des communications (FCC) des Etats Unis

d’Amérique bulletin OET numéro 65 (47CFR 1.1310)

IEEE C95.1 2005: Norme pour les niveaux de sécurité compatibles avec

l'exposition des personnes aux champs électromagnétiques de

radiofréquence 3kHz à 300GHz

DRAFT

TD9300 Installation Manual Safety and Regulatory Information 9

1.2 Equipment Safety

1.2.1 Installation and Servicing Personnel

The equipment should be installed and serviced only by qualified

personnel.

1.2.2 Antenna Load

Transmitting into a low VSWR will maximize the power delivered to the

antenna.

Notice Do not remove the load from the TD9300 while it is transmit-

ting.

Load transients (switching or removing the load) can damage the

transmitter.

1.2.3 Anti-tampering Devices

All network elements should be physically secured, where possible. This

includes the use of locked cabinets and the use of seals on connectors.

All network and audio connectors should be sealed with the stick-on type

of seal. The purpose of the seals is to detect unauthorized tampering. The

seal should reveal if any of the connectors have been unplugged or if any

unauthorized equipment has been plugged in.

The seals must be difficult to remove without breaking, and must bridge

between the cable and equipment side (plug and socket) of the connection.

Seals must cover any unused network or audio sockets. This includes the

Ethernet connector, any spare switch ports, and the console port on the

router and switch.

The seals must be difficult to reproduce. A sticker initialed or signed by the

technician should satisfy this.

Seals must be replaced if they need to be disturbed during maintenance.

DRAFT

10 Safety and Regulatory Information TD9300 Installation Manual

1.2.4 ESD Precautions

Notice This equipment contains devices which are susceptible to

damage from static charges. You must handle these devices carefully

and according to the procedures described in the manufacturers’ data

books.

We recommend you purchase an antistatic bench kit from a reputable

manufacturer and install and test it according to the manufacturer’s

instructions. Figure 1.1 shows a typical antistatic bench set-up.

You can obtain further information on antistatic precautions and the

dangers of electrostatic discharge (ESD) from standards such as ANSI/

ESD S20.20-1999 or BS EN 100015-4 1994.

Figure 1.1 Typical antistatic bench set-up

common point ground

(building ground or

mains ground)

conductive wrist strap

dissipative rubber

bench mat

Andere Handbücher für TD9300

Inhaltsverzeichnis

Andere Tait Touch-Terminal Handbücher

Tait

Tait T610 Bedienungsanleitung

Tait

Tait TD9300 Handbuch

Beliebte Touch-Terminal Handbücher anderer Marken

Ingenico

Ingenico AXIUM EX4000 Bedienungsanleitung

Heisei Electronics

Heisei Electronics Q-POS 815 Bedienungsanleitung

Amano

Amano MTX-15 Bedienungsanleitung

FLOWBIRD

FLOWBIRD CWT Compact Touch Bedienungsanleitung

Demco

Demco SP7 Bedienungsanleitung

Lathem

Lathem PC600 Series Bedienungsanleitung

Partner

Partner MF-2352 Bedienungsanleitung

NCR

NCR RealPOS 7460-2 Handbuch

Simrad

Simrad MS50 Montageanleitung

Unitech

Unitech MR350 MKII Kurzanleitung

Jungheinrich

Jungheinrich WMT 210 Bedienungsanleitung

Motorola

Motorola MTP850 Bedienungsanleitung

YASKAWA

YASKAWA 62H-MDC0 Bedienungsanleitung

MVG industries

MVG industries NeptuLink Bedienungsanleitung

Price Industries Limited

Price Industries Limited FDC Gebrauchsanweisung

Honeywell

Honeywell TemaKey Bedienungsanleitung

EBN

EBN BPC65-B-A16G Bedienungsanleitung

Prestel

Prestel VCS-G2PRO Bedienungsanleitung