Talk To Me Technologies Wego A Bedienungsanleitung

Quick Reference

wego

TTMT Switch Interface - GoTalk NOW PLUS

Need help? [email protected]877.392.2299 Option 3 talktometechnologies.com

Note: If these instructions do not match your current vocabulary set, please contact

Technical Support for assistance.

WCD-0920

Setup Instructions

Turn on the TTMT Switch Interface, using the on/off switch

located on the side of the interface box. You will see a red

power light to indicate the interface is turned on.

Ensure the Switch Interface is connected to the wego via

Bluetooth.

1. Exit the communication software. If you are unable to exit

the software, you may be in Guided Access.

2. Open the iOS Settings then select Bluetooth. Ensure

Bluetooth is toggled On. Under My Devices, you should

see TTMT Switch listed as Connected. If not, tap on

“TTMT Switch” to connect. You may see a pop-up

Bluetooth Pairing Request, if so, press Pair.

3. Once the Switch Interface is connected via Bluetooth, you

can plug in your switches and begin setup. Connect your

Switch or Switches to the TTMT Switch Interface.

The Switch Interface can be used with one or two switches.

For single-switch scanning, plug your switch to Switch Port 1.

For two-step scanning, plug in both switches, with your

“chooser” in Port 1 and your “mover” switch in Port 2.

Setup with GoTalk NOW PLUS

1. Return to the communication app, GoTalk NOW PLUS.

Open Settings and Scroll to Scanning.

2. Select Scanning Device Type > Space and Enter Switch.

3. Determine Scanning Mode.

a. For single-switch scanning, toggle on Auto Scan.

b. For two-switch scanning, toggle off Auto Scan.

4. Select Grouping Style (row, column, etc), Speed, Repeat,

etc. as preferred.

5. Press Done to close Settings and return to Player Mode.

Hardware, Buttons & Features

Need help? [email protected]877.392.2299 Option 3 talktometechnologies.com

Power

Flip switch into up position to turn on the Bluetooth

device and flip switch down to turn it off.

Power light indicator

When this light is on and red, the Bluetooth device is on.

Charging the TTMT Switch Interface

Plug charger into port to charge the switch interface.

Please only use a TTMT-approved charger with your

device.

Switch Port 1

Plug switch cords into the switch ports.

Switch Port 2

Plug switch cords into the switch ports.

TTMT Switch Interface

Andere Handbücher für wego A

Inhaltsverzeichnis

Andere Talk To Me Technologies Aufnahmegeräte Handbücher

Talk To Me Technologies

Talk To Me Technologies zuvo 12-D Bedienungsanleitung

Talk To Me Technologies

Talk To Me Technologies wego A Bedienungsanleitung

Talk To Me Technologies

Talk To Me Technologies wego A Bedienungsanleitung

Talk To Me Technologies

Talk To Me Technologies wego A Bedienungsanleitung

Talk To Me Technologies

Talk To Me Technologies zuvo PLUS Bedienungsanleitung

Talk To Me Technologies

Talk To Me Technologies wego A Bedienungsanleitung

Beliebte Aufnahmegeräte Handbücher anderer Marken

KV2 Audio

KV2 Audio 500 Series Bedienungsanleitung

Robotics Technologies

Robotics Technologies microBus-Cam II Bedienungsanleitung

Seca

Seca 460 Bedienungsanleitung

Cognex

Cognex MVS-8000 Series Bedienungsanleitung

Mect

Mect MPNC006 Series Bedienungsanleitung

Bad Caf

Bad Caf THE LEASH Bedienungsanleitung

Strymon

Strymon NIGHTSKY Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Bedienungsanleitung

Tews Technologies

Tews Technologies TPMC465 Bedienungsanleitung

Honeywell

Honeywell Excel 50 Bedienungsanleitung

SeaLevel

SeaLevel COMM+8.LPCI Bedienungsanleitung

Arturia

Arturia AUDIOFUSE STUDIO Bedienungsanleitung

Rukra

Rukra RK-1240 Bedienungsanleitung

Samson

Samson SCOM Bedienungsanleitung

Dynacord

Dynacord DPS260 Bedienungsanleitung

Nice

Nice Core Bedienungsanleitung

Pyle Pro

Pyle Pro PSS8 Bedienungsanleitung

RF-System

RF-System TinyGate Gebrauchs- und Pflegehandbuch