Tamron A005 Bedienungsanleitung

SP 70-300mm F/4-5.6

Di VC USD for Canon and Nikon (Model A005)

SP 70-300mm F/4-5.6

Di USD for Sony (Model A005)

Thank you for purchasing the Tamron lens as the latest addition to your photographic

equipment. Before using your new lens, please read the contents of this Owner’s Manual

thoroughly to familiarize yourself with your lens and the proper photographing

techniques for creating the highest quality images possible. With proper handling and

care, your Tamron lens will give you many years of photographing beautiful and exciting

pictures.

NOMENCLATURE (Refer to Fig. 1, if not specified)

1. Lens hood

2. Hood attaching alignment mark

3. Hood attaching indicator

4. Filter ring

5. Hood attaching index mark

6. Zooming ring

7. Focal length scale

8. Zoom index mark

9. Focusing ring

10. Distance scale

11. Distance index

12. VC (Vibration Compensation) switch

13. AF/MF switch (Fig. 3 & 4)

14. Lens attachment mark

15. Lens mount/Lens mount contacts

SPECIFICATIONS

A005

Focal Length

70-300mm

Maximum Aperture

F/4-5.6

Angle of View

34º 21’ - 8º 15’

Lens Construction

12/17

Minimum Focus Distance

1.5 m

Maximum Magnification Ratio

1:4.03

Filter Size

62 mm

Length

142.7 mm

Diameter

81.5 mm

Weight

765 g

Lens Hood

HA005

* Lengths, diameters and weights listed are of lenses with Nikon mounts.

ATTACHING AND REMOVING THE LENS

* How to mount the lens

Remove the rear cap of the lens. Align the lens attachment mark (14) on the lens barrel

with its counterpart on the camera mount and insert the lens. For Nikon models, align the

lens attachment mark with the dot on the camera and rotate the lens counter-clockwise

until it click-locks.

* How to detach the lens

Press the lens release button on the camera down, turn the lens counter-clockwise (Nikon

turn clockwise), and lift the lens off the camera’s lens mount.

*For further details, please read the instruction manual of your camera.

FOCUSING (AUTOFOCUS) and using the full-time manual function

In case of Sony cameras, switch the focusing mode switch of the camera to Auto focusing

mode (AF). In case of Canon or Nikon camera, switch the AF/MF switch (13) on the lens

to AF (Fig. 3). In case of Nikon camera with the focus mode selector dial, set the focus

mode to S or C, and then set the AF/MF switch on the lens side (13) to AF. Press the

shutter button lightly while viewing through the camera’s viewfinder, the lens focuses

automatically. An in-focus mark will light when lens focuses on the main subject sharply.

Press the shutter button further to photograph.

Using the full-time manual function?

A005 is equipped with the full-time manual function.

The full-time manual function is a function that the focus can be fine-tuned by the

manual focus without the AF/MF changing switch when taking a picture with autofocus.

How to use the full-time manual function

First, set the focus mode to AF. You can adjust focus manually while turning the

focusing ring with the shutter button pressed lightly.

* When set on AF mode, interfering with the focusing ring may cause serious damage to

the lens mechanism.

* The distance scale is marked for guidance purposes. The actual focal point may slightly

differ from the distance marked on the focal length index.

*For further details, please read the instruction manual of your camera.

FOCUSING (MANUAL FOCUS) (Ref. Fig. 1, 2 & 4)

In case of Sony cameras, switch the focusing mode switch of the camera to manual

focusing mode (MF). In case of a Nikon or Canon camera, switch the AF/MF switch (13)

on the lens to MF (Fig. 4). In case of Nikon camera with the focus mode selector dial, set

the focus mode to M and then set the AF/MF switch on the lens side (13) to MF. Focus

manually by rotating the focusing ring (9) while viewing through the camera’s viewfinder.

The main subject in the viewfinder will be sharp when the lens is focused correctly.

* Even when in MF mode, turning the focusing ring while pressing the shutter button

halfway, the focus aid function lamp lights up when the picture is in focus.

* At infinity, make sure the image in the viewfinder appears sharp. The infinity position

is made with certain allowances to insure proper focus under a variety of conditions.

* For further details, please read the instruction manual of your camera.

VC MECHANISM (Ref. Fig. 1, 5 & 6) (Mounted for Nikon and Canon models)

VC (Vibration Compensation) is a mechanism that reduces the image blur caused by

hand-held shooting. When using the VC, pictures can be taken at shutter speeds up to a

maximum of 4 stops slower than the speed when the VC is not used.

*Based on the company’s standard measurement. Also, the correction of image blur

differs depending on the conditions during picture taking and the person using the camera.

* How to use VC mechanism

VC can be used in AF or MF mode.

1. Set the VC switch on.

*When VC is not used, set switch off.

2. Press the shutter button halfway to verify the effect of the VC. When the shutter button

is pressed halfway, it takes about 1 second for the VC to provide a stable image.

With the VC mechanism, there are no occasions when the image in the viewfinder blurs

after the shutter button is pressed down halfway.

* The VC can be effective for hand-held shots under the following conditions:

-Dimly lit locations

-Scenes where flash photography is forbidden

-Situations where footing is uncertain

-Taking continuous shots of moving subjects

* The VC may not be able to give full effect in the following cases:

-When a photograph is taken from a fast moving vehicle

-Shooting during the excessive movement of the camera

-Turn the VC switch OFF when taking pictures with the bulb setting or during long

exposures. If the VC switch is ON, the VC mechanism may introduce errors.

-With the VC mechanism, there are occasions that the image in the viewfinder blurs right

after the shutter button is pressed down halfway, but this is not a malfunction.

-When the VC is ON, the number of images recordable is reduced due to the power used

from the camera.

-When the VC is ON, immediately after the shutter button is pushed halfway down and

approximately 2 seconds after a finger releases the shutter button, the camera will

“click”. This sound is the VC’s locking mechanism activating, not malfunctioning.

-Turn the VC switch OFF when using a tripod.

-After releasing the shutter button, the VC will continue to operate for about 2 seconds

until the locking mechanism activates.

-When the lens is removed from the camera while VC is activating, the lens may make

clicking sound when the lens is subjected to jolt. This is not a malfunction. Re-attach the

lens to the camera and turn the power ON. The sound should stop.

-The VC activates while the “release” button is pushed halfway down. (It is activated 2

seconds after the shutter button is released.)

-VC can be used in AF or MF mode.

ZOOMING (Ref. Fig. 1 & 2)

Rotate zooming ring (6) of the lens while viewing through the camera’s viewfinder and

compose your image at the chosen focal length.

LENS HOOD (Ref. Fig. 1, 7 & 9)

A bayonet-type lens hood is provided as standard equipment. We recommend shooting

with the hood attached whenever possible as the lens hood eliminates stray light, which is

harmful to the picture. However, please be aware of the precautions stated in the next

section when your camera is equipped with a built in flash.

Attaching the Lens Hood (Ref. Fig. 7 & 8)

Align Hood attaching alignment mark (2) on the hood with the corresponding index mark

(5) or the top of the index line of the distance scale of the lens. Press the hood lightly onto

the hood attaching index mark (Fig. 7) and then rotate it clockwise to secure. The lens

hood will be secure when the mark “TAMRON O” is at the top (Fig. 8). When attaching

the lens hood, hold the focus and zoom control rings, so they are not rotated

unintentionally.

-Pay particular attention to align the hood attaching indexes when using zoom lenses

including wide-angle setting. Improper attachment of a hood on a wide-angle zoom lens

may cause large shadowed areas in your pictures.

Stowing lens hood on the lens (Ref. Fig. 9)

Reverse the lens hood. Point the lens toward the opening, and then align the hood

attaching index on the lens with the “TAMRON O” alignment on the hood (3).

Turn the hood clockwise until the alignment mark is at the top to set it (Fig. 9).

PRECAUTIONS IN SHOOTING

-The optical design for Di takes into consideration the various features of digital single

reflex cameras. However, due to the configuration of the digital single reflex cameras,

even when auto focus accuracy is within specifications, the focal point may be a little

forward or behind the optimum point when shooting with auto focus under some

conditions.

-When the built-in-flash on the camera is used, adverse photographic phenomena such as

corner illumination fall-off or vignetting at the bottom part of the image may be observed,

especially in wide angle ranges. This is due to the inherent limitation of the coverage of

the built-in-flash, and/or the relative position of the flash to the edge of the lens barrel

which causes shadows on the image. It is strongly recommended to use a suitable

separate flash unit provided by the camera manufacturer for all flash photography. For

further details, please read the “built-in-flash” article on the instruction manual of your

camera.

-When using the lens in the telephoto focal range, please be careful of camera shake. To

reduce blur, turn the VC (Vibration Compensation) switch on. To reduce image blue

without using the VC function, follow these steps.

To avoid camera shake on digital cameras, use higher ISO settings and for film cameras,

use higher ISO film to obtain higher shutter speeds. Using a tripod or monopod is also

effective.

When hand-holding the camera to take pictures, stand still opening your legs slightly

apart, hold your elbows in firmly against your chest, and hold the camera firmly against

your face. If possible, lean against something to steady yourself or place the camera on

something to secure the hold. Especially when hand-holding your camera, you will be

steadier if you hold your breath while your press the shutter button down gently and

firmly.

-When set on AF mode, interfering with the focusing ring may cause serious damage to

the lens mechanism.

-Certain models may indicate the maximum and minimum aperture values of the lens in

approximate numbers. This is inherent to the design of the camera and not an indication

of an error.

TO ENSURE LONG-TERM SATISFACTION

-Avoid touching the glass element surface. Use photographic lens cloths or blowers to

remove dust from the lens element surface. When not using the lens, always place a lens

cap on it for protection.

-Use a lens cleaning tissue or lint cloth with a drop of cleaning solution to remove

fingerprints or dirt on the glass lens surface with a rotary motion from the center to the

edge. Use a silicone cloth to clean your lens barrel only.

-Mildew is an enemy of your lens. Clean the lens after shooting near water or in any

humid place. Store your lens in a clean, cool, dry place. When storing the lens in a lens

case, store it with commercially available drying agents such as silicagel, and change the

agent occasionally. If you find mildew on your lens, consult an authorized repair shop or

nearby photographic store.

-Do not touch the lens-camera interface contacts since dust, dirt and/or stains may cause a

contact failure between the lens and camera.

-When using your equipment [camera(s) and lens(es)] in an environment where the

temperature changes from one extreme to the other, make sure to put your equipment

temporarily in a case or plastic bag for a length of time in order for the equipment to go

through a gradual temperature shift. This will reduce potential equipment trouble.

Inhaltsverzeichnis

Andere Tamron Kameraobjektiv Handbücher

Tamron

Tamron C001 Bedienungsanleitung

Tamron

Tamron BO11 Bedienungsanleitung

Tamron

Tamron 360EM Bedienungsanleitung

Tamron

Tamron F017 Bedienungsanleitung

Tamron

Tamron 272E Bedienungsanleitung

Tamron

Tamron A014 Bedienungsanleitung

Tamron

Tamron AF18-270mm F/3.5-6.3 Di VC Handbuch

Tamron

Tamron B001 Bedienungsanleitung

Tamron

Tamron Tele converter 2.0 Bedienungsanleitung

Tamron

Tamron SP AF10-24mm F/3.5-4.5 Di II LD Aspherical (IF)... Bedienungsanleitung

Tamron

Tamron SPECIFICATIONS Bedienungsanleitung

Tamron

Tamron A063 Bedienungsanleitung

Tamron

Tamron A025 Bedienungsanleitung

Tamron

Tamron A022 Bedienungsanleitung

Tamron

Tamron SP 70-200mm F/2.8 Di Bedienungsanleitung

Tamron

Tamron B011 Bedienungsanleitung

Tamron

Tamron A001 Bedienungsanleitung

Tamron

Tamron SP150-600mm F/5-6.3 Di VC USD Bedienungsanleitung

Tamron

Tamron A06 Bedienungsanleitung

Tamron

Tamron B005 Bedienungsanleitung

Tamron

Tamron A071 Bedienungsanleitung

Tamron

Tamron A031 Bedienungsanleitung

Tamron

Tamron A15 Bedienungsanleitung

Tamron

Tamron A17 Bedienungsanleitung

Beliebte Kameraobjektiv Handbücher anderer Marken

THORLABS

THORLABS ELL15 Bedienungsanleitung

FUJICA

FUJICA ZC1000 Bedienungsanleitung

Sony

Sony SEL-55210 Bedienungsanleitung

Sony

Sony VCL-HG2037 Bedienungsanleitung

Honeywell

Honeywell HLM25V6F12 Bedienungsanleitung

Sony

Sony VCL-ST30 Bedienungsanleitung

Canon

Canon FD 35 - 70 mm Bedienungsanleitung

Sony

Sony SAL-85F14Z - 85mm f1.4 Carl Zeiss Planar T Coated Telephoto... Bedienungsanleitung

ARRI

ARRI Lenses Bedienungsanleitung

Olympus

Olympus M.Zuiko Digital ES 300mm f4.0 IS PRO Bedienungsanleitung

Sony

Sony VCL-DE07T Bedienungsanleitung

Canon

Canon FD Lens Handbuch

Samsung

Samsung 20-50mm F3.5-5.6 ED II Bedienungsanleitung

Sinar

Sinar Rolleiflex 6008 AF Bedienungsanleitung

Rokinon

Rokinon SP 85mm F1.2 Bedienungsanleitung

Nikon

Nikon AF-S Zoom-Nikkor 17-35mm f/2.8D IF-ED Bedienungsanleitung

Samsung

Samsung Samsung 18-55mm Bedienungsanleitung

FujiFilm

FujiFilm XF56mm F1.2 R APD Bedienungsanleitung