Tams elektronik LSU Bedienungsanleitung

LSU

Lichtsignalumschalter für

Märklin* Hobby-Signale n

Light signal switch for

Märklin* Hobby light signals nAnleitung

nManual

Inverseur de feux

pour signaux lumineux

Hobby de Märklin* nMode d´emploi

nHandleiding

Lichtseinomschakelaar voor

Märklin* Hobby-lichtseinen n

Art.-Nr. 21-01-096 / 22-01-096 n

nDeutsch 3

nEnglish 20

nFrançais 37

nNederlands 54

Alle Rechte, insbesondere das Recht der

Vervielfältigung und Verbreitung sowie der

Übersetzung vorbehalten. Vervielfältigungen

und Reproduktionen in jeglicher Form

bedürfen der schriftlichen Genehmigung

durch die Tams Elektronik GmbH.

Technische Änderungen vorbehalten.

publication may be reproduced or

transmitted in any form or by any means,

electronic or mechanical, including

photocopying, without prior permission in

writing from Tams Elektronik GmbH.

Subject to technical modification.

Tout droits réservés, en particulier les droits

de reproduction et de diffusion ainsi que le

traduction. Toute duplication ou

reproduction sous quelque forme que ce soit

nécessite l´accord écrit de la societé Tams

Elektronik GmbH.

Sous réserve de modifications techniques.

publicatie mag worden vermenigvuldigd

opgeslagen of openbaar gemaakt, zonder

voorafgaande schriftelijke toestemming van

Tams Elektronik GmbH.

Technische wijzigingen voorbehouden.

English LSU

Page 20

Table of contents

How to use this manual 21

Intended use 21

Safety instructions 22

EMC declaration 24

Operation overview 25

Circuit Diagram (Fig. 1)

Technical specifications 26

Checking the package contents 26

Required tools and consumables 26

Safe and correct soldering 27

Assembling the kit 28

Parts list / Printed Circuit Board (PCB) layout (Fig. 2)

Connecting the light signal switch 31

Connecting the signal (Fig. 3)

Connecting the train synchronisation (Fig. 4)

FAQ 34

Manufacturer's note 35

Certification 35

Conditional warranty 35

* The following manufacturers and their products are mentioned in this

manual:

Märklin & Cie. GmbH, Goeppingen, Germany

Viessmann Modellspielwaren GmbH, Germany

LSU English

Page 21

How to use this manual

This manual gives step-by-step instructions for safe and correct

assembly of the kit and fitting of the ready-built module, and operation.

Before you start, we advise you to read the whole manual, particularly

the chapter on safety instructions and the FAQ chapter. You will then

know where to take care and how to prevent mistakes which take a lot

of effort to correct.

Keep this manual safely so that you can solve problems in the future. If

you pass the kit or the ready-built module on to another person, please

pass on the manual with it.

Intended use

The kit or the ready-built module can be assembled and operated with

a model railway to control a signal using this manual. It has been

specially developed to control a Maerklin* Hobby light signal.

Any other use is inappropriate and invalidates any guarantees.

The kit and the ready-built module should not be assembled or fitted by

children under the age of 14.

Reading, understanding and following the instructions in this manual

are mandatory for the user.

English LSU

Page 22

Safety instructions

Mechanical hazards

Cut wires can have sharp ends and can cause serious injuries. Watch

out for sharp edges when you pick up the PCB.

Visibly damaged parts can cause unpredictable danger. Do not use

damaged parts: recycle and replace them with new ones.

Electrical hazards

§Touching powered, live components,

§touching conducting components which are live due to malfunction,

§short circuits,

§connecting the circuit to another voltage than specified,

§impermissibly high humidity,

§condensation build up

can cause serious injury due to electrical shock. Take the following

precautions to prevent this danger:

§Never perform wiring on a powered module.

§Assembling and mounting the kit should only be done in closed,

clean, dry rooms. Beware of humidity.

§Only use low power for this module as described in this manual and

only use certified transformers.

§Connect transformers and soldering irons only in approved mains

sockets installed by an authorised electrician.

§Observe cable diameter requirements.

§After condensation build up, allow a minimum of 2 hours for

dispersion.

§Use only original spare parts if you have to repair the kit or the

ready-built module.

LSU English

Page 23

Fire risk

Touching flammable material with a hot soldering iron can cause fire,

which can result in injury or death through burns or suffocation.

Connect your soldering iron or soldering station only when actually

needed. Always keep the soldering iron away from inflammable

materials. Use a suitable soldering iron stand. Never leave a hot

soldering iron or station unattended.

Thermal danger

A hot soldering iron or liquid solder accidentally touching your skin can

cause skin burns. As a precaution:

§use a heat-resistant mat during soldering,

§always put the hot soldering iron in the soldering iron stand,

§point the soldering iron tip carefully when soldering, and

§remove liquid solder with a thick wet rag or wet sponge from the

soldering tip.

Dangerous environments

A working area that is too small or cramped is unsuitable and can cause

accidents, fires and injury. Prevent this by working in a clean, dry room

with enough freedom of movement.

Other dangers

Children can cause any of the accidents mentioned above because they

are inattentive and not responsible enough. Children under the age of 14

should not be allowed to work with this kit or the ready-built module.

Little children can swallow small components with sharp edges, with

fatal results! Do not allow components to reach small children.

In schools, training centres, clubs and workshops, assembly must be

supervised by qualified personnel.

In industrial institutions, health and safety regulations applying to

electronic work must be adhered to.

English LSU

Page 24

EMC declaration

This product is developed and tested in accordance with the European

standards EN 55014-1 and EN 61000-6-3 and meets the EC - directive

2004/108/EG and legal requirements.

To guarantee the electromagnetic tolerance in operation you must take

the following precautions:

§Connect the transformer only to an approved mains socket installed

by an authorised electrician.

§Make no changes to the original parts and accurately follow the

instructions, circuit diagram and PCB layut included with this

manual.

§Use only original spare parts if you have to repair the kit or the

ready-built module.

LSU English

Page 25

Operation overview

The light signal switch is developed to control a Maerklin* Hobby-light

signal. Using it with Viessmann*-signal kits is possible as well. The

Viessmann*-signal kits have to be modified, you can order the manual

from us or you can download it from our homepage.

The light signal switch has to be connected between the light signal and

an external change-over switch which switches between the two signals

("red" and "green"). Using a switching decoder to switch between the

two signals is possible as well. Push-button switches as used e.g. to

switch points are not suitabe to switch between signals. In exactly the

same way as in real life, the light signal switch causes the LED switched

off to fade slowly and the LED switched on to brighten slowly.

Fig. 1: Circuit diagram

100

English LSU

Page 26

Technical specifications

Supply voltage 12-18 Volt a.c. voltage

Current consumption approx. 1 mA (without loads)

Max. current at the output 50 mA

Protected to IP 00

Ambient temperature in use 0 - + 60 °C

Ambient temperature in storage -10 - + 80 °C

Comparative humidity allowed max. 85 %

Dimensions approx. 48 x 52 mm

Weight approx. 15 g

Checking the package contents

Check the contents of the package for completeness after unpacking:

§one kit, containing the components listed in the parts and one PCB or

§one ready-built module,

§one manual.

Required tools and consumables

Make sure you have the following tools and materials ready for use:

§an electronic soldering iron (max. 30 Watt) with a fine tip,

§a soldering iron stand,

§a tip-cleaning sponge,

§a heat-resistant mat,

§a small side cutter and wire stripper,

§a pair of tweezers and long nose pliers (not necessary for the

ready-built module),

§tin solder (0,5 mm. diameter),

§wire (diameter: >0,25 mm² for all connections),

§a change-over switch (if necessary: bipolar).

LSU English

Page 27

Safe and correct soldering

Caution:

Incorrect soldering can cause dangers through fires and heat. Avoid

these dangers by reading and following the directions given in the

chapter Safety instructions. If you have had training in soldering you

can skip this chapter.

§Use a small soldering iron with max. 30 Watt. Keep the soldering tip

clean so the heat of the soldering iron is applied to the solder point

effectively.

§Only use electronic tin solder with flux.

§When soldering electronic circuits never use soldering-water or

soldering grease. They contain acids that can corrode components

and copper tracks.

§Solder quickly: holding the iron on the joints longer than necessary

can destroy components and can damage copper tracks or

soldering eyes.

§Observe correct polarity orientation of semi-conductors, LEDs

electrolytic capacitors and integrated circuits before soldering and

ensure that the solder time does not exceed 5 seconds, otherwise

components can be damaged.

§Apply the soldering tip to the soldering spot in such a way that the part

and the soldering eye are heated at the same time. Simultaneously add

solder (not too much). As soon as the solder becomes liquid take it

away. Hold the soldering tip at the spot for a few seconds so that the

solder flows into the joint, then remove the soldering iron.

§Do not move the component for about 5 seconds after soldering.

§To make a good soldering joint you must use a clean and

unoxidised soldering tip. Clean the soldering tip with a damp piece

of cloth, a damp sponge or a piece of silicon cloth.

§Cut the wires after soldering directly above the PCB solder side with

a side cutter.

Inhaltsverzeichnis

Andere tams elektronik Schalten Handbücher

tams elektronik

tams elektronik ARTEMIS Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

tams elektronik LSU Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken