TANDBERG 7000 MXP Bedienungsanleitung

User Manual

Software version F5

D13354.07

June 2006

This document is not to be reproduced in whole or in part without permission in writing from:

TANDBERG 7000 MXP

CAUTION!

Avoid displaying the same images continuously over a long period

of time on the monitors.

Displaying the same images such as still images for a long time may cause after-image

lagging. This may occur in the following two cases:

1. After image lagging due to remaining electrical load

When image patterns with very high peak luminance are displayed for more than 1 minute,

after-image lagging may occur due to the remaining electric load. The after-images remaining

on the screen will disappear when moving images are displayed. The time for the after-images

to disappear depends on the luminance of the still images and the time they had been

displayed.

2. After-image lagging due to sticking

When images of the same pattern are displayed continuously for several hours or displayed

for a short period of time every day, after-images may remain on the screen due to the

sticking of the fluorescent materials. In this case, these images may decrease if moving

images are displayed after them, but basically they will not disappear.

Solving after-image lagging problems

If you have got after-image lagging on your monitors, you can reduce the problem to an

acceptable level by displaying a white image on the monitors for a few hours. This can be

accomplished by focusing the camera towards a white paper and setting maximum

brightness. See the ‘User Manual’ for details.

NOTE: Warranty may be invalidated if the precautions listed above are not followed.

User Manual

iii

Trademarks and Copyright

of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form, or

by any means, electronically, mechanically, by photocopying, or otherwise, without the prior

written permission of TANDBERG. Nationally and internationally recognized trademarks and

trade names are the property of their respective holders and are hereby acknowledged.

Third Party Software

Amended / Expanded Copyright notices for third-party software on the TANDBERG MXP systems

are listed below:

Full copies of the licenses and warranty statements are located on the product CD in the the

license files directory.

The non-commercial third party code is distributed in binary form under the terms of non-copyleft

style open source licenses such as BSD, Artistic or MIT/X Consortium.

The product also has some binary code distributed under the terms of the GNU public license

with an exemption which allows static links to non-copyleft commercial code.

In accordance with section (3) of the GNU General Public License, copies of such code will be

provided upon request by contacting TANDBERG. Please contact us by using the Online Support

section at www.tandberg.net or the “contact us” section of this manual. Please provide USD

10.00 for media and shipping.

Agfa

Contains iType™ from Monotype Imaging Corporation.

CMU-SNMP

CMU-SNMP is distributed under the terms of the CMU SNMP license, which is an open source license similar to a BSD or

X Consortium License.

Dropbear - an SSH2 server

The Dropbear SSH2 server is distributed under the terms of the Dropbear License, which is a MIT/X Consortium style

open source license.

TANDBERG 7000 MXP

eCos

eCos, the Embedded Configurable Operating System.

All or some portions of this file are derived from material licensed to the University of California by American Telephone

and Telegraph Co. or Unix System Laboratories, Inc. and are reproduced herein with the permission of UNIX System

Laboratories, Inc.

This code is derived from software contributed to Berkeley by Stephen Deering of Stanford University.

Portions of eCos code are distributed under several BSD style licenses. Other portions of eCos code are distributed under

the terms of the GNU General Public License with a non-copyleft exception which allows static links to non-copyleft

programs.

ExPat XML Parser:

The ExPat XML parser is distributed under the terms of the ExPat License which is a MIT/X Consortium style open

source license

ICU

reserved.

ICU is distributed under the terms of the ICU license, which is a MIT/X Consortium style license.

OpenSSL

This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit

(http://www.openssl.org/)"

OpenSSL is distributed under the terms of the OpenSSL and SSLeay licenses, which are both BSD style open source

licenses.

User Manual

Disclaimer

The information in this document is furnished for informational purposes only, is subject to

change without prior notice, and should not be construed as a commitment by TANDBERG. The

information in this document is believed to be accurate and reliable; however TANDBERG

assumes no responsibility or liability for any errors or inaccuracies that may appear in this

document, nor for any infringements of patents or other rights of third parties resulting from its

use. No license is granted under any patents or patent rights of TANDBERG.

This document was written by the Research and Development Department of TANDBERG,

Norway. We are committed to maintain a high level of quality in all our documentation. Towards

this effort, we welcome you to Contact us with comments and suggestions regarding the content

and structure of this document.

Patent information

TANDBERG technology described in this manual is protected by one or more of the following

U.S. Patent No. 5,584,077 - 5,838,664 - 5,600,646 - 7,010,119 - 7,034,860 and other patents are

pending in the United States and/or other countries.

snprintf

Snprintf is distributed under the terms of the snprintf license, which is a Frontier Artistic style open source license.

A standard copy of snprintf can be located at the author’s web site: http://www.ijs.si/software/snprintf/

xSupplicant (wpa_supplicant) 802.1x

xSupplicant is distributed under the terms of the xSupplicant license, which is a BSD style open source license.

TANDBERG 7000 MXP

Environmental Issues

Thank you for buying a product which contributes to a reduction in pollution, and thereby helps

save the environment. Our products reduce the need for travel and transport and thereby reduce

pollution. Our products have either none or few consumable parts (chemicals, toner, gas, paper).

Our products are low energy consuming products.

TANDBERG’s Environmental Policy

Environmental stewardship is important to TANDBERG’s culture. As a global company with

strong corporate values, TANDBERG is committed to being an environmental leader and

embracing technologies that help companies, individuals and communities creatively address

environmental challenges.

TANDBERG’s environmental objectives are to:

•Develop products that reduce energy consumption, CO2 emissions, and traffic congestion

•Provide products and services that improve quality of life for our customers

•Produce products that can be recycled or disposed of safely at the end of product life

•Comply with all relevant environmental legislation.

European Environmental Directives

As a manufacturer of electrical and electronic equipment TANDBERG is responsible for

compliance with the requirements in the European Directives 2002/96/EC (WEEE) and

2002/95/EC (RoHS).

The primary aim of the WEEE Directive and RoHS Directive is to reduce the impact of disposal of

electrical and electronic equipment at end-of-life. The WEEE Directive aims to reduce the amount

of WEEE sent for disposal to landfill or incineration by requiring producers to arrange for

collection and recycling. The RoHS Directive bans the use of certain heavy metals and

brominates flame retardants to reduce the environmental impact of WEEE which is land filled or

incinerated.

TANDBERG has implemented necessary process changes to comply with the European RoHS

Directive (2002/95/EC) and the European WEEE Directive (2002/96/EC).

Waste Handling

In order to avoid the dissemination of hazardous substances in our

environment and to diminish the pressure on natural resources, we

encourage you to use the appropriate take-back systems in your area.

Those systems will reuse or recycle most of the materials of your end

of life equipment in a sound way.

TANDBERG products put on the market after August 2005 are

marked with a crossed-out wheelie bin symbol that invites you to use

those take-back systems.

Please contact your local supplier, the regional waste administration or

http://www.tandberg.net/recycling if you need more information on the collection and recycling

system in your area.

User Manual

vii

Information for Recyclers

As part of compliance with the European WEEE Directive, TANDBERG provides recycling

information on request for all types of new equipment put on the market in Europe after August

13th 2005.

Please contact TANDBERG at recy[email protected] and provide the following details for the

product for which you would like to receive recycling information:

•Model number of TANDBERG product

•Your company’s name

•Contact name

•Address

•Telephone number

•E-mail address

Digital User Guides

TANDBERG is pleased to announce that we have replaced the printed versions of our User

Guides with a digital CD version. Instead of a range of different user manuals, there is now one

CD – which can be used with all TANDBERG products – in a variety of languages. The

environmental benefits of this are significant. The CDs are recyclable and the savings on paper

are huge. A simple web-based search feature helps you directly access the information you need.

In addition, the TANDBERG video systems now have an intuitive on-screen help function, which

provides a range of useful features and tips. The contents of the CD can still be printed locally,

whenever needed.

TANDBERG 7000 MXP

viii

Operator Safety Summary

For your protection please read these safety instructions completely before you connect the

equipment to the power source. Carefully observe all warnings, precautions and instructions both

on the apparatus and in these operating instructions.

Keep this manual for future reference.

Water and Moisture

•Do not operate the apparatus under or near water - for example near a bathtub, kitchen sink,

or laundry tub, in a wet basement, near a swimming pool or in other areas with high humidity.

•Never install jacks for communication cables in wet locations unless the jack is specifically

designed for wet locations.

•Do not touch the product with wet hands.

Cleaning

•Unplug the apparatus from communication lines, mains power-outlet or any power source

before cleaning or polishing. Do not use liquid cleaners or aerosol cleaners. Use a lint-free

cloth lightly moistened with water for cleaning the exterior of the apparatus.

•Unplug the apparatus from communication lines before cleaning or polishing. Do not use

liquid cleaners or aerosol cleaners. Use a lint-free cloth lightly moistened with water for

cleaning the exterior of the apparatus.

Ventilation

•Do not block any of the ventilation openings of the apparatus. Never cover the slots and

openings with a cloth or other material. Never install the apparatus near heat sources such as

radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

•Do not place the product in direct sunlight or close to a surface directly heated by the sun.

Lightning

•Never use this apparatus, or connect/disconnect communication cables or power cables

during lightning storms.

Dust

•Do not operate the apparatus in areas with high concentration of dust

Vibration

•Do not operate the apparatus in areas with vibration or place it on an unstable surface.

Power connection and Hazardous voltage

•The product may have hazardous voltage inside. Never attempt to open this product, or any

peripherals connected to the product, where this action requires a tool.

•This product should always be powered from an earthed power outlet.

•Never connect attached power supply cord to other products.

•In case any parts of the product has visual damage never attempt to connect mains power, or

any other power source, before consulting service personnel

User Manual

•The plug connecting the power cord to the product/power supply serves as the main

disconnect device for this equipment. The power cord must always be easily accessible.

•Route the power cord so as to avoid it being walked on or pinched by items placed upon or

against it. Pay particular attention to the plugs, receptacles and the point where the cord exits

from the apparatus.

•Do not tug the power cord

•If the provided plug does not fit into your outlet, consult an electrician.

•Never install cables, or any peripherals, without first unplugging the device from it's power

source.

•*Always use the power supply (AC-DC adapter) provided with this product.

•*Replace only with power supply (AC-DC adapter) specified by TANDBERG.

•*Never connect attached power supply (AC-DC adapter) to other products.

Servicing

•Do not attempt to service the apparatus yourself as opening or removing covers may expose

you to dangerous voltages or other hazards, and will void the warranty. Refer all servicing to

qualified service personnel.

•Unplug the apparatus from it's power source and refer servicing to qualified personnel under

the following conditions:

- If the power cord or plug is damaged or frayed.

- If liquid has been spilled into the apparatus.

- If objects have fallen into the apparatus.

- If the apparatus has been exposed to rain or moisture

- If the apparatus has been subjected to excessive shock by being dropped.

- If the cabinet has been damaged.

- If the apparatus seems to be overheated.

- If the apparatus emits smoke or abnormal odor.

- If the apparatus fails to operate in accordance with the operating instructions

Accessories

•Use only accessories specified by the manufacturer, or sold with the apparatus.

Communication lines

•Never touch uninstalled communication wires or terminals unless the telephone line has been

disconnected at the network interface.

•Do not use communication equipment to report a gas leak in the vicinity of the leak.

•To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord (ISDN

cables).

* Applies to the following products: T150 MXP, T550 MXP, T770 MXP, T880 MXP, T990 MXP, T1500 MXP, T1000 MXP,

T2000 MXP, T3000 MXP Profile, Tandberg Codec 3000 MXP, Tandberg Tactical MXP, Edge 75/85/95 MXP.

TANDBERG 7000 MXP

If you have any questions, comments or suggestions, please see the Online Support section at

www.tandberg.net.

It is also possible to send a fax or mail to the attention of:

Product and Sales Support

TANDBERG

P.O. Box 92

1325 Lysaker

Norway

Tel: +47 67 125 125

Fax: +47 67 125 234

Andere Handbücher für 7000 MXP

Inhaltsverzeichnis

Andere TANDBERG Konferenzsystem Handbücher

TANDBERG

TANDBERG Codec C20 Bedienungsanleitung

TANDBERG

TANDBERG 6000 MXP Profile Bedienungsanleitung

TANDBERG

TANDBERG 2000 MXP Bedienungsanleitung

TANDBERG

TANDBERG 1500 MXP Bedienungsanleitung

TANDBERG

TANDBERG 3000 MXP Profile Bedienungsanleitung

TANDBERG

TANDBERG 3000 MXP Profile Bedienungsanleitung

TANDBERG

TANDBERG Edge D13922.06 Montageanleitung

TANDBERG

TANDBERG 6000 MXP Profile Bedienungsanleitung

TANDBERG

TANDBERG 770 MXP Bedienungsanleitung

TANDBERG

TANDBERG 3000 MXP Profile Bedienungsanleitung

TANDBERG

TANDBERG 150 MXP Bedienungsanleitung

TANDBERG

TANDBERG MPS 200 Service-Handbuch

TANDBERG

TANDBERG Codec C Series Bedienungsanleitung

TANDBERG

TANDBERG Profile 42" Service-Handbuch

TANDBERG

TANDBERG 150 MXP Bedienungsanleitung

TANDBERG

TANDBERG Codec C90 D14306.01 Bedienungsanleitung

TANDBERG

TANDBERG Codec C90 D14128.02 Kurzanleitung zur Einrichtung

TANDBERG

TANDBERG Telepresence T3 119076.02 Montageanleitung

TANDBERG

TANDBERG DIRECTOR D5016402 Bedienungsanleitung

TANDBERG

TANDBERG Profile 42" Bedienungsanleitung

TANDBERG

TANDBERG 1000 MXP Bedienungsanleitung

TANDBERG

TANDBERG 550 MXP Bedienungsanleitung

TANDBERG

TANDBERG 8000 MXP Montageanleitung

TANDBERG

TANDBERG MediaPlace MXP Benutzerhandbuch

Beliebte Konferenzsystem Handbücher anderer Marken

Kramer

Kramer VIA GO Bedienungsanleitung

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Bedienungsanleitung

Sony

Sony PCS-I150 Bedienungsanleitung

Middle Atlantic Products

Middle Atlantic Products VTC Series Bedienungsanleitung

AVT

AVT MAGIC AC1 Go Bedienungsanleitung

Prentke Romich Company

Prentke Romich Company Vanguard Plus Leitfaden

Speakerbus

Speakerbus iD 712 Bedienungsanleitung

Trelleborg

Trelleborg SafePilot CAT PRO Bedienungsanleitung

Sennheiser

Sennheiser ADN Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 7100 Bedienungsanleitung

AINA

AINA PTT Voice Responder Bedienungsanleitung

Yamaha

Yamaha ProjectPhone PJP-100H Bedienungsanleitung

vissonic

vissonic VLI Series Bedienungsanleitung

Panasonic

Panasonic KX-VC500 Bedienungsanleitung

Poly

Poly Trio 8300 Bedienungsanleitung

Crestron

Crestron Mercury CCS-UCA-SMK Maßzeichnung

Tenveo

Tenveo ALL-IN-ONE Bedienungsanleitung

AXIWI

AXIWI AT-350 Bedienungsanleitung