T&D RTR-500DC Bedienungsanleitung

Introductory Manual

Thank you for purchasing our product.

This manual explains in brief how to get an

RTR-500DC Unit ready for use and how to install

the software.

2015. 08 16504780056 (7th Edition)

Details about how to use the software

"RTR-500DC for Windows" and its functions can

be found in the software "Operation Guide

(Help)".

Introduction

Important Notices and Disclaimers

In order to properly use this product, please carefully read this manual

before using.

T&D Corporation accepts no responsibility for any malfunction of and/

or trouble with this product or with your computer that is caused by

the improper handling of this product and will deem such trouble or

malfunction as falling outside the conditions for free repair outlined in

the attached warranty.

- All rights of this Manual belong to T&D Corporation.

- It is prohibited to use, duplicate and/or arrange a part or whole of this manual

without the permission of T&D Corporation.

- Microsoft® and Windows® are registered trademarks of Microsoft Corporation

USA and are binding in the USA, Japan and all other countries.

- Windows Vista is either a registered trademark or trademark of Microsoft

Corporation in the United States, Japan, and/or other countries.

- All registered trademarks, company names, product names and logos mentioned

herein or for products being used are the properties of T&D Corporation or of their

respective owners.

- Specications, design and other contents outlined in this manual are subject to

change without notice.

- Please follow the safety precautions outlined in the manual carefully.

- We cannot guarantee nor are we responsible for safety if this product is used in any

manner other than was intended.

- On-screen messages in this document may vary slightly from the actual messages.

- Please notify the shop where you purchased this product or T&D Corporation of

any mistakes, errors or unclear explanations in this manual.

- T&D Corporation accepts no responsibility for any damage or loss of income

caused by the use of our product.

- This product has been designed for private and/or industrial use only. It is not for

use in situations where strict safety precautions are necessary such as in

connection with medical equipment, whether directly or indirectly.

- We are not responsible for any malfunction or trouble caused by the use of our

product or by any problem caused by the use of measurement results of our

product. Please be fully aware of this before using our product.

- This Manual cannot be reissued, so please keep it in a safe place.

- Please read the warranty and provisions for free repair carefully.

Introduction

Software User’s Agreement

Disclaimers

- Although T&D Corporation has made operational tests on our software

"RTR-500DC for Windows", we cannot guarantee that all operations will work

properly under all conditions.

- T&D Corporation shall not accept any responsibility for any damage whether direct

or indirect that results from the usage of "RTR-500DC for Windows".

- Specications of "RTR-500DC for Windows" may be subject to change and service

may be terminated without advance notice to the user. In such a case T&D

Corporation shall not be responsible for any damages whether direct or indirect

from the inability to use "RTR-500DC for Windows".

- T&D Corporation has no obligation to correct any defects found in

"RTR-500DC for Windows".

- The Copyright for RTR-500DC for Windows, including the program and relevant

documents, belongs solely to T&D Corporation.

- The reprinting or redistribution for commercial purposes whether in part or in

whole, in magazines or as a part of any product is strictly forbidden without the

expressed consent of T&D Corporation. Any inquires concerning commercial

redistribution should be directed to the Sales Department of T&D Corporation.

- Please do not attempt to make any changes or modications to

RTR-500DC for Windows.

Table of Contents

Introduction

Introductory Manual ----------------------------------------1

Important Notices and Disclaimers ------------------------2

Software User’s Agreement --------------------------------3

Table of Contents --------------------------------- 5

Safety Precautions and Instructions ------------- 6

Explanation of Symbols ------------------------------------6

What is "RTR-500DC"? --------------------------12

Outline ----------------------------------------------- 12

Features of Wireless Communication Function -------- 12

Features of the RTR-500DC ------------------------------ 13

Before Using this Product ----------------------14

What are "Base Units", "Remote Units" and

"Repeaters"? ---------------------------------------------- 14

Basic Procedures --------------------------------16

Getting Ready

Package Contents -------------------------------18

Connect the Antenna ------------------------------------- 18

Appearance Diagram and Part Names ---------19

Install the Battery ---------------------------------20

Other Power Sources Available for Use ----------------- 20

Battery Replacement ------------------------------------- 20

Sleep Mode 20

Power and Auto Power Off Function -----------21

Turning ON the Power ------------------------------------ 21

Turning OFF the Power ----------------------------------- 21

Auto Power Off Function --------------------------------- 21

Operations via Buttons and Operation Dial-----22

Using the Operation Dial ---------------------------------- 22

Button Functions ----------------------------------------- 22

About the Icons and Abbreviations -------------23

Installing the Software ---------------------------24

Before Installing the Software: --------------------------- 24

Installing the USB Device Driver -----------------27

Carrying out Registration, Settings,

and Operation

Process of Making Registrations and Settings -30

1. Make Settings for Base Units ------------------------- 30

2. Register Data Loggers as Remote Units ------------- 30

3. Register Repeaters (when necessary) ---------------- 30

4. Check Wireless Signal Strength and Make Wireless

Route Settings --------------------------------------------- 31

Launcher Window and Applications ------------32

How to Open ---------------------------------------------- 32

Communication between RTR-500DC and PC -----

Operations which require RTR-500DC PC

Communication ------------------------------------------- 33

Communication between Remote Unit / Repeater

and PC -------------------------------------------34

Operations which require Remote Unit / Repeater PC

Communication ------------------------------------------- 34

Wireless Communication between RTR-500DC

and Remote Unit ---------------------------------35

Operations which require RTR-500DC Remote Unit

Wireless Communication -------------------------------- 35

Operating Remote Units via Multiple RTR-500DC Units -

----------------------------------------------- 35

How to Register the Same Remote Unit to Multiple

RTR-500DC Units ----------------------------------------- 35

Optical and Cable Communication between RTR-

500DC and Remote Units ------------------------36

Operations which require RTR-500DC Remote Unit

Optical and Cable Communication --------------------- 36

Optical Communication: RTR-501 / 502 / 503 / 505 / 507

----------------------------------------------- 36

Cable Communication: RTR-574 / 576 ----------------- 36

Communication Functions

Downloading Data by Group --------------------38

Wireless Communication:[ Gather Data] ------- 38

Reading Judgement Results in the “Gathering Result”

Window ----------------------------------------------- 40

Downloading Data from a selected Remote Unit -

------------------------------------------------------41

Wireless Communication:[ Gather Data] ------- 41

Optical / Cable Communication: [ Gather Data] 42

Table of Contents

Monitoring -----------------------------------------43

Gather Current Readings and Current Status of Remote

Unit : [ Monitor Mode] ---------------------------- 43

Communication Conditions for Monitoring ------------- 44

Viewing a Monitoring Window ------------------45

Warning Monitoring ------------------------------48

Target Remote Units for Warning Monitoring ---------- 48

Warning Conditions --------------------------------------- 48

Warning Buzzer -------------------------------------------- 48

Starting / Stopping Remote Unit Recording ---49

Wireless Communication: [ Record Settings] - 49

Optical / Cable Communication: [ Record

Settings] ----------------------------------------------- 50

Registering and Unregistering Remote Units for "Visitor

Entry"

-----------------------------------------------51

[ Visitor Entry] ------------------------------------- 51

Registration Error Messages ----------------------------- 51

Communication with Remote Units registered for "Visitor

Entry" ----------------------------------------------- 52

Communication Errors ---------------------------53

When the memory capacity is full: [Memory Full] ------ 53

When the Signal Strength is weak: ---------------------- 54

Application related Communication Errors ------------- 54

Viewing Functions

Viewing Data Stored in RTR-500DC ------------56

Viewing a Data List: <List> button / [Data List] --------- 56

Data Lists for RTR-574 / 576 ----------------------------- 56

Detailed Information of Data: <List> button / [Data List] 57

Viewing the Graph --------------------------------59

Graph Display: <List> button / [Data List] --------------- 59

How to Read the Graph ---------------------------------- 59

Data Range Check and Judgement --------------------- 61

Viewing RTR-574 / 576 Data in a Graph ---------------- 62

Data Downloaded via Wireless Communication ------- 62

Data Downloaded via Cable Communication ---------- 62

Operating the Graph ------------------------------63

Changing the Channel on Display ----------------------- 63

Enlarged View---------------------------------------------- 63

Checking the Highest / Lowest Readings--------------- 63

Deleting Selected Data ---------------------------64

Deleting Selected Data : [Data List] / <List> button ---- 64

Making RTR-500DC Unit Settings /

Others

Operational Settings for RTR-500DC ----------66

Changing Unit of Temperature --------------------------- 66

Adjusting the Backlight ----------------------------------- 66

Adjusting Contrast ---------------------------------------- 67

Checking Memory ----------------------------------------- 67

Deleting All Data ------------------------------------------- 67

Making Clock and Time Zone Settings via RTR-500DC

Operations 68

Figuring Out Your Time Zone ----------------------------- 69

Using the RTR-500DC in Areas that Observe Daylight

Savings Time ---------------------------------------------- 69

Setting the Buzzer OFF ----------------------------------- 70

Checking Battery Status of the RTR-500DC ----------- 70

Monitoring Radio Waves --------------------------------- 71

Menu List -----------------------------------------72

[ Gather Data] ------------------------------------- 72

[ Monitor Mode] ----------------------------------- 72

[ Record Settings] -------------------------------- 73

[ Visitor Entry] ------------------------------------- 74

[ Gather Data] ------------------------------------- 74

[ Record Settings] -------------------------------- 74

[Data List] ----------------------------------------------- 75

[Set Functions] --------------------------------------------- 75

FAQ ------------------------------------------------76

Q&A about RTR-500DC ---------------------------------- 76

Q&A about Settings --------------------------------------- 77

Q&A about Operations after Settings-------------------- 79

Specications -------------------------------------82

Software (RTR-500DC for Windows) -------------------- 83

Options --------------------------------------------84

Introduction

Safety Precautions and Instructions

The following items should be strictly obeyed for the safe usage of this

Unit, and for protecting yourself and other people from bodily harm

and/or damage to property. Before using this product, please read the

following carefully and fully understand the contents.

Explanation of Symbols

Explanation of Warning Symbols

DANGER

These entries are actions that absolutely under no

circumstance should be taken. The taking of such an

action may cause serious personal physical damage or

death.

CAUTION These entries are actions that if taken may lead to

physical injury or damage to persons or things.

Explanation of Picture Symbols

Denotes an important warning or caution.

Denotes a forbidden action.

Denotes an action that must be taken.

Introduction

DANGER

When installing and using this Unit, make sure to follow all warnings and

directions from your computer manufacturer.

Do not take apart, repair or modify the Unit.

Doing so may cause re or electrocution.

If water or a foreign body enters the Unit, immediately disconnect cables,

remove batteries, and stop using.

Continued use may cause re or electrocution.

Do not use this Unit in wet or humid places, such as a bathroom.

Doing so may cause re, electrocution, and/or malfunction.

Store the Unit and Accessories out of the reach of children.

Not doing so may result in unexpected accidents and injury from playing with or swallowing

parts.

Do not connect any communication cables connected to the Unit to telephone

line outlets.

Continued use may cause re or electrocution.

If any smoke or strange smells are emitted from the Unit, immediately

disconnect the power and communication cables.

Continued use may cause re or electrocution.

Do not drop or expose the Unit to a strong impact. If that happens to the Unit,

immediately disconnect the power and communication cables and stop using.

Continued use may cause re or electrocution.

Make sure to periodically remove dust and dirt from the AC adaptor plug.

When performing maintenance please make sure to disconnect the plug from

the outlet.

If dust is allowed to accumulate on the plug, moisture may cause poor insulation and result

in re.

Do not remove the battery or unplug the AC adaptor with wet hands.

This may cause electrocution.

Introduction

CAUTION

Please note that this Introductory Manual has been written based on the

presupposition that details about set-up of any necessary equipment to

enable network connection have already been taken care of by the user and

that connection has been conrmed as workable.

T&D Corporation shall not be responsible for any damages which a contractor, a user or a

third party may suffer, whether direct or indirect, due to the inability to communicate or

use communication devices.

Further, T&D is not responsible for any damage, malfunction or trouble,

whether direct or indirect, caused by the use of our products.

This Unit has been designed for private and/or industrial use only.

It is not for use in situations where strict safety precautions are necessary

such as in connection with medical equipment, whether directly or indirectly.

Harmful gases or chemicals may cause corrosion and/or other danger to the

Unit. Also, coming in contact with hazardous substances, may cause harm to

people handling the Unit. Therefore, do not use or store the Unit in any

environment that is exposed to chemicals and/or harmful gases.

This Unit is not waterproof.

If the Unit gets dirty, wipe it with a clean cloth.

Do not store, leave, or use the Unit in any place exposed to direct sunlight,

high temperature, extremely low temperatures, or high humidity.

This may cause deformation to both the outside casing and the inside. It may also cause

condensation on the inside of the Unit leading to re or electrocution.

Battery terminals may provide insufcient contact due to age or vibration.

This may lead to data loss.

Battery terminals may provide insufcient contact due to age or vibration.

This may lead to data loss.

Battery life varies depending upon the type of battery, the measuring environment,

frequency of communication, ambient temperature in which it is used, and battery

performance.

If the Unit is not to be used for a long period of time, for safety reasons please

remove the battery.

Leaving batteries inside the Unit may cause battery leakage and malfunction.

Do not use an AC adaptor other than one that is specied for use with the

Unit.

Doing so may cause re or malfunction.

Please do not insert ngers or foreign objects into cable connection jacks.

Make sure that all cable plugs are inserted fully, so as not to cause an

improper connection. Also, when unplugging cables from the Unit, do not pull

the cord, but hold the connector to disconnect.

Introduction

Do not cut or process the cords for the AC adaptor or the communication

cables. Also, do not twist, pull on or swing any of the cords.

To prevent damage to the Unit from static electricity, remove static electricity

from your body by touching metal around you (door knob, window frame)

before touching the Unit.

Static electricity may cause not only damage to the Unit, but may cause breaks in or a

loss of data.

Do not disconnect the communication cable during wireless communication

or USB communication.

Doing so may cause adverse effects to the Unit and/or PC.

We shall not guarantee the Unit's operation if it has been connected to a PC

using a USB hub or a USB extension cable.

Do not use or store the Unit in the following places.

Doing so may cause electrocution, re and/or other adverse effects to the

Unit and/or other surrounding devices.

-Areas exposed to direct sunlight

This will cause the inside of the Unit to become overheated and may cause re,

deformation, and/or other damage including malfunction.

-Areas exposed to strong magnetic elds

This may cause damage including malfunction.

- Areas exposed to water leakage

This may cause electrocution or other damage including malfunction.

- Areas exposed to static electricity.

This may cause damage including malfunction.

- Areas exposed to excessive vibration

This may cause injury, malfunction, damage or loss of proper electrical contact.

- Areas that are not at or level

This may cause the Unit to fall and result in injury and/or damage.

- Areas near re or exposed to excessive heat

This may cause damage including malfunction and deformation.

- Areas exposed to excessive dust, dirt and smoke

This may cause damage including malfunction.

Introduction

Notes and Precautions for Installing Wireless

Communication Devices

When installing wireless communication devices take special care in selecting locations so as

to ensure proper communication.

Note that even after a successful installation, due to changes in environmental conditions,

communication errors may occur when restarting the system.

As far as possible, try to keep wireless communication devices away from metals and set

them up in high unobstructed positions.

- Please take note that in many instances, walls, oors, stairs, fences

and desks will contain metals. In order to carry out communication

between indoor and outdoor units, please locate indoor units near a

window so that radio waves can be easily transmitted.

- Please install these devices more than 30cm away from walls or boards

containing metal.

- If wireless communication units are placed in a metal container such as

a freezer or refrigerator, the possible wireless communication range will

be shortened. In most cases radio waves are transmitted via doors

and door openings so place devices as near to doors as possible.

Repeater

(RTR-500)

Place so that the antenna is

away from objects or walls.

As far as possible, keep the devices away from noise-emitting sources.

- Equipment such as some industrial instruments, electronic devices or uorescent lamps generate noise.

Please place Units more than 1 meter away from such devices.

- Please place Units more than 1 meter away from computers and other devices which emit noise.

- Keep all wires as far away from wireless communication devices as possible. Please be careful about plac-

ing near any wiring or cables such as power supply cables, telephone wires or LAN cables.

Objects which contain lots of water, such as plants or soil, absorb radio waves. We highly

recommend that such materials should not be placed between or near wireless communica-

tion Units.

- When measuring temperature in a greenhouse it has been reported that as plants grew, communication er-

rors also increased.

- Do not place Units directly on the ground.

Do not place devices which are using the same communication frequency channel in the

same area.

- If the same channel is used for multiple devices not only will more communication errors occur, but battery

life will also be shortened.

- If there is a possibility that devices with the same frequency channel will be in wireless communication at the

same time, please make sure to make changes to the frequency channels so they are not the same.

After having made an installation, check the wireless signal strength.

Checking from the software:

The supplied software application includes a feature to check for wireless signal strength. In the RTR-500DC

Settings Utility, in the [Wireless Route Settings] menu it is possible to check signal strength.

Checking from the RTR-500DC:

In the Main Menu of the RTR-500DC, open [Monitor Mode] - [Specify Remote Unit]; check the signal

strength by looking at the antenna icons displayed in the monitoring window.

Andere Handbücher für RTR-500DC

Inhaltsverzeichnis

Andere T&D Handheld Handbücher

T&D

T&D i.roc Ci70-Ex Bedienungsanleitung

Beliebte Handheld Handbücher anderer Marken

Honeywell

Honeywell Dolphin 9900 Bedienungsanleitung

Honeywell

Honeywell CN75 Bedienungsanleitung

MiTAC

MiTAC Mio 168 Bedienungsanleitung

Wasp

Wasp WDT92 Bedienungsanleitung

Texas Instruments

Texas Instruments TI-Nspire Bedienungsanleitung

AXEM Technology

AXEM Technology MBS Bedienungsanleitung

Armstrong

Armstrong Brain Wave Montageanleitung

Unitech

Unitech TB128 Bedienungsanleitung

Symbol

Symbol MC9000-G Installations- und Betriebshandbuch

Unitech

Unitech HT1 1D Batch Bedienungsanleitung

Ingenico

Ingenico IWL220 GPRS Bedienungsanleitung

Intermec

Intermec CK61 Bedienungsanleitung

Symbol

Symbol c2000 Bedienungsanleitung

Symbol

Symbol MC18 Installations- und Betriebshandbuch

Acer

Acer n20 Bedienungsanleitung

Intermec

Intermec CK61 Bedienungsanleitung

Docomo

Docomo F-04H Bedienungsanleitung

Toshiba

Toshiba e350 Series Bedienungsanleitung