Targus Handspring Digital Camera Bedienungsanleitung
Targus Digital Camera
for Handspring™
Handheld Computers
2
Targus Digital Camera
Congratulations on your purchase of the Targus
Handcam Digital Camera. The camera driver
software self-loads the first time you insert the
Handcam into the expansion slot on your
Handspring™Visor™, allowing you to
immediately capture images and video clips from
your handheld computer. The camera’s pivoting
lens allows you to aim the camera while viewing
the display and the adjustable focus permits
clear, sharp close-up and scenic images.
With the supplied Universal Serial Bus (USB)
Handcam socket adapter and camera driver
software, you can also use the Handcam with
your notebook or desktop computer.
From any computer, the Handcam enables you
to:
•Capture still images and video clips
•View images in full-screen (640 x 480) or a
Palm size (160 x 120)
•Immediately play back video clips
•Name, categorize and add notes to images,
edit and/or print your still images
•Email images or video clips
Targus Digital Camera 3
•Transfer images and video clips between
computers using the supplied USB Handcam
socket adapter or beam technology
NOTE: To transfer images or video clips, the receiving
computer must have the camera driver already installed.
In addition to this user’s guide, this package
contains:
•Targus Handcam Digital Camera
•USB Handcam socket adapter
•CD-ROM containing the camera driver and
other bundled software
System Requirements
To install the camera driver software, your
desktop or notebook computer must meet the
following hardware requirements and run one of
the operating systems listed below.
Hardware
•Pentium II PC or higher, with a hard disk drive
and 160 MB free space
•64 MB RAM or higher, depending on the oper-
ating system
•CD-ROM drive
Operating System
•Windows® 98/Me/2000
Targus Digital Camera 4
Using the Targus Handcam
Digital Camera with Your
Handheld Computer
Connecting the Camera
To connect the Targus Handcam Digital Camera
to your Visor handheld computer, slide the
camera into the computer’s expansion slot until it
is firmly in place.
Identifying Function Icons
Use the following icons to control the camera
application.
Main Menu Icons
Image Capture — tapping this icon enables you
to capture still images.
Video Capture — tapping this icon enables you
to record video clips.
View — tapping this icon displays full-screen
images and video clips.
I
mage
Video
Capture
Capture
View Thumbnail
Details Self-timer
Targus Digital Camera 5
Thumbnail — tapping this icon displays several
small-size images and video clips at a time.
Details — tapping this icon displays a list of
images and video files and their properties.
Self-timer — tapping this icon activates the timer
countdown, which allows you to capture “hands
free” images.
Setting up the Camera
1Tap the Image Capture icon or the Video
Capture icon to view live video on your
computer’s screen.
2Adjust the camera’s position and focus as
necessary.
Capturing Images
1To activate the image capture feature, tap
the Image Capture icon, if you have not
already done so.
2Use the memory indicator, located above the
menu icons, to gauge the current maximum
image size based on the amount of memory
available. Allow 130 KB for a Full size
image, 38 KB for Palm size.
NOTE: Before capturing an image, you can specify the
image size by tapping the size indicator/changer. Full size =
640 x 480 pixels (full VGA). Palm size = 160 x 120 pixels.
Targus Digital Camera 6
Image Capture Menu options
3When you are ready to capture an image,
press the Up button on your handheld
computer.
To save the image, see “Saving Images and
Video Clips” on page 7.
Recording Video Clips
1To activate the video recording feature, tap
the Video Capture icon if you have not
already done so.
2To start recording, press the Up button on
your handheld computer.
The video length indicator, located above the
menu icons, shows how many seconds of video
you can record, based on the amount of
memory available.
Video Capture Menu options
Memory
indicator
Size
indicator/changer
M
emory
indicator
Targus Digital Camera 7
3When you are ready to stop recording video,
press the Up button again or, tap the Stop
on-screen button.
To save the video clip, see the next section.
Saving Images and Video Clips
When you capture an image or stop recording
video, the “Save picture? Yes/No” prompt
appears below the image.
Saving an image
1Choose the category in which you want to
save the file by tapping the Category box,
located in the upper-right corner of the
screen, and selecting a new category from
the list.
Targus Digital Camera 8
2Tap Yes to save, or No to delete, the captured
image and return to live video.
NOTE: When capturing images and video, you can use
your handheld computer’s Up button for Yes and Down
button for No responses.
The file is automatically named with the current
date and time.
3To give the file a descriptive title, tap on the
file name, located in the upper-left corner,
and enter the new name.
Now you are ready to view or transfer images
and video clips. See “Viewing Images and Video
Clips” below, or “Using the Targus Handcam
Digital Camera with Your Notebook or Desktop
Computer” on page 14.
Viewing Images and Video Clips
To view saved images and video clips, tap the
View icon. The most recent image or video
appears. Tap the scroll arrows, using your stylus,
to view other images or videos.
Targus Digital Camera 9
The View Menu has additional icons that allow
you to do the following with images and video
clips:
•View information
•Add notes
•Transfer the file using beam technology
•Delete the file
View Menu options - image
Tap the icon to activate the feature you want to
use.
NOTE: When viewing images and video, you can use your
handheld computer’s Up and Down buttons to scroll
between files.
Video Playback Features
During video playback, additional icons appear
that enable you to control the video clip. For
Scroll
Notes
Information
Beam
Delete
Size
indicator/changer
Targus Digital Camera 10
example, to edit the name of a video, tap on the
title and enter a new name.
View Menu options - video
During video playback you can also:
•View the length of the video clip via the time
counter.
•Pause video playback by tapping the Pause
icon.
•Resume playback by tapping the Play icon.
Time
Pause
Play
Looping
on/off
Progress
counter
bar
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
