Tascam Mixcast 4 Bedienungsanleitung

TASCAM Mixcast 4 1

Mixcast 4

Checking the firmware version

Confirm the firmware version of your Mixcast 4 before conducting a firmware update.

1. Turn the main unit on.

2. Tap the Menu icon on the Home Screen to open the MENU

Screen.

3. Tap the other settings ( ) icon on the MENU Screen to open the

Others Screen.

4. The firmware version is shown at the bottom right of the Others

Screen. Updating is not necessary if the firmware version shown

here is the same or newer than the intended update version.

Preparing an SD card for the firmware update

1. Download the latest firmware from the TEAC Global Site (https://

teac-global.com/).

The downloaded file will be compressed in ZIP format. Open it in a

suitable folder on the computer.

The file used for updating is named“Mixcast4_XXXX.YYY” or similar.

(XXXX and YYY are numbers.)

2. Load an SD card that has been formatted by a Mixcast 4 into the

unit.

3. Use a USB cable to connect the Mixcast 4 and the computer and

turn the unit on.

ATTENTION

The unit should be connected directly to the computer, not through

a USB hub. Moreover, noise could be picked up if the cable is too

long.

4. From the Mixcast 4 MENU Screen, open the SD Settings Screen.

5. Set SD Device Mode to ON.

6. On the computer, open Explorer (if using Windows) to show the SD

card in the unit as an external drive with “Mixcast4” as the volume

label.

Copy the downloaded file for firmware update (for example,

“Mixcast4_0123.101”) to the UTILITY folder in “Mixcast4”.

7. After copying, use the proper procedures for the computer to

unmount the “Mixcast4” drive.

See the computer’s operation manual for instructions about how to

unmount an external volume.

8. Press the“Exit” button shown on the unit screen to end mass

storage mode and turn the unit off.

0821.MA-3354A

2TASCAM Mixcast 4

Mixcast 4

Firmware update procedures

1. Confirm that the SD card with the firmware update file is loaded.

2. Turn the unit on while pressing the MARK button. Keep pressing

the MARK button until the unit starts in update mode and the

Firmware Update Screen appears on the display.

i The screen shown above is an example. The actual appearance will

differ.

NOTE

If the Firmware Update Screen does not appear, turn the power off

once and try again from step 1.

3. Tap the “Update”button to start the update.

ATTENTION

i Be careful not to let the power be interrupted during the update.

i Do not load or remove SD cards during an update.

i The unit might become unstartable if the power is interrupted or an

SD card is loaded or removed during an update.

4. When updating ends, the unit will turn off automatically.

5. Refer to“Checking the firmware version”and confirm that the

firmware has been updated to the latest version.

6. Connect the unit with a computer by USB. Then, delete the

firmware update file in the “UTILITY” folder.

This completes updating the unit.

Andere Handbücher für Mixcast 4

Andere Tascam Diktiergerät Handbücher

Tascam

Tascam HS-P82 Bedienungsanleitung

Tascam

Tascam DR-07 Handbuch

Tascam

Tascam AUDIO RECORDER Bedienungsanleitung

Tascam

Tascam DR-2d Bedienungsanleitung

Tascam

Tascam DR-100 MKIII Bedienungsanleitung

Tascam

Tascam dr-44wl Bedienungsanleitung

Tascam

Tascam GB-10 Bedienungsanleitung

Tascam

Tascam DR100 Mk3 Bedienungsanleitung

Tascam

Tascam DR-40 Bedienungsanleitung

Tascam

Tascam DR-1 Bedienungsanleitung

Tascam

Tascam DR-680 Anleitung zur Verwendung

Tascam

Tascam DA-98 Bedienungsanleitung

Tascam

Tascam DR-08 Bedienungsanleitung

Tascam

Tascam HS-P82 Bedienungsanleitung

Tascam

Tascam DA-78HR Bedienungsanleitung

Tascam

Tascam DR-05X Bedienungsanleitung

Tascam

Tascam DR-07 Bedienungsanleitung

Tascam

Tascam DR-701D Bedienungsanleitung

Tascam

Tascam PR-10 Bedienungsanleitung

Tascam

Tascam DR-40X Bedienungsanleitung

Tascam

Tascam DR-40 Bedienungsanleitung

Tascam

Tascam DR-701D Bedienungsanleitung

Tascam

Tascam DS-D98 Bedienungsanleitung

Tascam

Tascam DR-05 Leitfaden

Beliebte Diktiergerät Handbücher anderer Marken

Sony

Sony ICD-UX533F Bedienungsanleitung

RCA

RCA VR5230 Bedienungsanleitung

Ramsey Electronics

Ramsey Electronics BULLSHOOTER ENDLESS LOOP BS2C Benutzerhandbuch

Sony

Sony TCM-400DV Bedienungsanleitung

LogTag

LogTag TREL30-16 Bedienungsanleitung

SVAT

SVAT CVP800 Bedienungsanleitung

Marantz

Marantz PMD620 Bedienungsanleitung

Zoom

Zoom H4next Bedienungsanleitung

Roland

Roland BR-900CD Bedienungsanleitung

JVC

JVC ProHD GY-HMZ1U Bedienungs- und Wartungshandbuch

Panasonic

Panasonic PQT8531-P Bedienungsanleitung

Sanyo

Sanyo TRC-6400 Bedienungsanleitung

Olympus

Olympus DW-90 Bedienungsanleitung

Sanyo

Sanyo ICR-B150 Bedienungsanleitung

Korg

Korg D4 Bedienungsanleitung

Sony

Sony ICD-SX46 - Ic Recorder Bedienungsanleitung

Olympus

Olympus DIGITAL VOICE RECORDER WS-200S Montageanleitung

Philips

Philips VOICE TRACER VTR5810 Bedienungsanleitung