SAFETY INFORMATION
4
General Safety Rules for All Battery-operatedTools
READ AND UNDERSTAND ALL INSTRUCTIONS.
Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury.
Work Area
• Keep your work area clean and well-lit.
• Do not operate power tools near liquids, gases, ordust.Power tools create sparks which may ignite the dust or fumes.
• Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you tolose control.
Electrical Safety
• A battery-operated tool with integral batteries or a separate battery pack must be recharged only with the specified charger for
the battery. A charger that may be suitable for one type of battery may create a risk of fire when used with another battery.
• Use a battery-operated tool only with specified battery pack. Use of any other batteries may create a risk of fire.
Personal Safety
• Stay alert, watch what you are doing, and use common sense when operating a power tool.
Do not use tool while tired or under the influence of drugs, alcohol, or medication.
Amoment of inattention while operating power tools may result in serious personal injury.
• Dress properly. Do not wear loose clothing or jewellery.Contain long hair. Keep your hair, clothing,
and gloves away from moving parts. Loose clothes, jewellery, or long hair can be caught in moving parts.
• Avoid accidental start-ups. Make sure switch is in the locked or OFF position before inserting battery pack.
Carrying tools with your finger on the switch or inserting the battery pack into a tool with the switch ON invites accidents.
WARNING
• Remove adjusting keys or wrenches before turning the tool on. Awrench or key that is left attached to a rotating part
of the tool may result in personal injury.
• Do not overreach. Keep proper footing and balance at alltimes. Proper footing
and balance enable better control ofthe tool in unexpected situations.
Tool Use and Care
• Do not use if switch does not turn tool ON or OFF. A tool that cannot be controlled with the switch is dangerous
and must be repaired.
• Disconnect battery pack from tool or place the switch in the locked or OFFposition before making any adjustments,
changing accessories, or storing the tool.Such preventive safety measures reduce the risk of starting the tool accidentally.
• Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users.
• When battery pack is not in use, keep it away from other metal objects like paper clips, coins, keys, nails, screws,
or other small metal objects that can make a connection from one terminal to another.
Shorting the battery terminals together may cause sparks, burns, or a fire.
• Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s
operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools.
• Use only accessories that are recommended by the manufacturer for your tool.
Accessories that may be suitable for one tool may create a risk of injury when used on another tool.
Service
• Tool service must be performed only by qualified repair personnel.
Service or maintenance performed by unqualified personnel may result in a risk of injury.
• When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual.
Use of unauthorized parts or failure to follow Maintenance Instructions may create a risk of shock or injury.
ALWAYS WEAR EYE PROTECTION.
A sweeper can blow foreign objects into your eyes which could cause permanent eye damage.
ALWAYS wear safety goggles (not glasses).Ordinary eyeglasses have only impact-resistant lenses—they
are NO Tsafety goggles.
