TATU PD PLUS Bedienungsanleitung
OPERATOR’S
MANUAL
PD / PCAPD / PCA
PCA PLUSPCA PLUS
Dealer:
Owner:
Firm / Farm:
City: State:
No. of the Certificate of Guarantee:
Serial / No.:
Date: Invoice No.:
Product:
Notes:
IDENTIFICATION
1
PD / PCA / PCA PLUS - Rev. 01 - Jun/22
Introduction
This operator's manual helps on the assembly process and
provides the necessary information for the correct operation
and maintenance, thus assuring a higher yield, safety and
durability. This manual contains the necessary information for
the best performance of your equipment. The operator and the
maintenance staff must carefully read the entire manual before
working with the equipment. They must also read and understand
the safety recommendations.
For any further explanation or in the case of technical
problems that may arise during the service, consult your dealer
and the Technical support department of the factory, as they can
ensure the fully functioning of your TATU equipment.
We reiterate that a careful read and an observation of every
item on this manual are needed to assure a greater lifetime of
your equipment.
MARCHESAN IMPLEMENTOS E MÁQUINAS AGRÍCOLAS "TATU" S.A.MARCHESAN IMPLEMENTOS E MÁQUINAS AGRÍCOLAS "TATU" S.A.
Marchesan Av., 1979 - Zip Code 15994-900 - Matão - SP - Brazil
Telephone 55.16.3382.8282
www.marchesan.com.br
2PD / PCA / PCA PLUS - Rev. 01 - Jun/22
1. To the owner 4
2. To the operator 5 to 15
3. Data sheet 16 to 18
4. Components 19 to 21
PCA moving support components 19
PCA PLUS moving support components 20
PD components 21
5. Assembly 22 to 88
Valtra frame assembly 22 to 27
Valtra and Massey Ferguson frames assembly 28 & 29
Massey Ferguson frame assembly 30 to 39
LS frame assembly 40 to 43
New Holland and Case Farmall frames assembly 44 & 45
New Holland frame assembly 46 to 51
John Deere frame assembly 52 & 53
Mahindra frame assembly 54 & 55
Landini frame assembly 56 to 59
Plate fixation 60
Rod assembly 61
BT CDC JS AR circuit with control valve 62
BT CDC JS LS circuit for tractor with closed center control valve 63
Circuit with flow divider for the tractor pump (PCA) 64
Circuit with control valve for the tractor pump (PCA PLUS) 65
Tatu hydraulic system circuit - SHT 66
BT circuit without control valve PCA / PCA PLUS 67
BT circuit without the front loader control valve 68
BT circuit with front loader control valve 69
Setting up / assembly of a BT tractor with control valve 70
BT tractor with control valve and quick coupler assembly 71 to 74
BT complete system without control valve assembly 75
Setting up the BT tractor without control valve 75
Hoses connection system 76
Counterweights position 77
Accessories position 78
Hitching to the tractor 79
Unhitching from the tractor 80
Front loader moving support assembly 81
Front loader assembly (PD) 82
Table of contents
3
PD / PCA / PCA PLUS - Rev. 01 - Jun/22
Moving support guide assembly 83
Front loader support guide fixation model 84 & 85
Joystick assembly on the platform (PD / PCA and PCA PLUS) 86
Oil reservoir assembly 87 & 88
6. Adjustments and operations 89 to 94
Hitching and unhitching the PCA 89 to 91
Gauge adjustment 91
Control valve pressure adjustment 92
Control valve operation 93
Operations - important points 94
7. Optional 95 to 110
PCA accessories / PD accessories 95 & 96
Third function - control valve operation 97
Joystick electric circuit assembly - PCA and PD 98
Hydraulic circuit for the accessories with third function 99
Accessory hydraulic circuit 100 & 101
Flow divider valve - DFE 102
SAB - operational precautions (PCA) 103
Leveling rod 104
Self-leveling system - operational precautions (SAE and PAC) 104
Front loader correct use 105 & 106
Operational precautions 106
GSA - correct way to use the equipment 107
Front loader angular adjustment 108
Front loader cutting depth adjustment 109
SAB accessory assembly - PD 110
8. Maintenance 111 to 124
Using the lock for maintenance 111
Lubrication / Lubrication points 112 to 114
Filling up the reservoir 115
Oil and return filter replacement for the SHT models 116
Cleaning the filter 117
Hydraulic system air drainage 118
Hydraulic cylinder maintenance 119 & 120
Hydraulic safety 121
Troubleshooting guide 122 & 123
Equipment maintenance 124
9. Important data 125
10. Important 126
Table of contents
4PD / PCA / PCA PLUS - Rev. 01 - Jun/22
1. To the owner
General information
- The warranty shall not be applied to any equipment or any part that has been altered
elsewhere than at the place of manufacture, or which the original purchaser thereof
at retail has used or allowed to be used parts, not made or supplied by Marchesan.
NOTE
The acquisition of any Tatu product assures to the original purchaser the following rights:
- Warranty certificate;
- Operator's manual;
- Technical assistance by the dealer on equipment delivery.
However, the owner must check the condition of the equipment on delivery, as well as
knowing the warranty terms.
Special attention should be given to the safety recommendations, operation precautions
and maintenance of the equipment.
The instructions in this manual indicates how to get the best performance and allow
the operator to get maximum income, increasing the equipment lifetime.
This manual should be read by operators and maintenance staff.
IMPORTANT!
- Only people who own a full knowledge of the tractor and equipment must transport,
operate and carry out any maintenance on them;
- Marchesan is not responsible for any damage caused by accident on transporting,
misuse or inadequate storage, either by negligence and/or lack of experience from
any person;
- Marchesan is not responsible for any damage caused by unpredictable situations
or for the incorrect use of the equipment.
Right and left hand side indications are made observing the equipment from the rear.
To order any parts or request technical assistance services, it is required to provide
the data contained on the nameplate, which is located on the equipment's frame.
5
PD / PCA / PCA PLUS - Rev. 01 - Jun/22
2. To the operator
Working safely
Be careful with the environment
Read and understand the information before making any
adjustment or maintenance.
Follow every recommendation, warning and safety practice
that can be found inside this manual, as any accident may lead
to injuries or death.
REMEMBER, ACCIDENTS MUST BE AVOIDED!REMEMBER, ACCIDENTS MUST BE AVOIDED!
ATTENTION!
- This symbol is a warning used to prevent accidents.
- The instructions under this symbol refers to the safety of the operator, mechanician
or third parties, therefore they should be carefully read and observed. If the safety
instructions are not being followed, a serious accident or even death may occur.
Dear operator!
Respect the ecology. Do not throw trash away. This gesture of
goodwill helps to protect our environment.
Products such as oil, fuel, filters, batteries and others are spilt over
the soil and can penetrate to the underground layers, compromising
nature. Ecological and conscious disposal of them should be done.
This equipment is simple to operate, requiring however the basic and essential cautions
to its handling.
Always keep in mind that safety requires constant attention, observation and prudence
during work, transportation, maintenance and storage. The security aspects must be
carefully observed to avoid accidents.
Recycle damaged and disposable items to preserve a clean
environment.
6PD / PCA / PCA PLUS - Rev. 01 - Jun/22
2. To the operator
Never use your bare hands to check hydraulic leaks, the high pressure
can cause injuries.
Never attempt to change the adjustments, clean or lubricate the
equipment when the same is switched on or in movement.
Be careful while driving on slopes. Risk of overturn.
Prevent that chemical products (i.e.: fertilizers and treated seeds)
make any contact with your skin or clothes.
Keep access and work places clean or free from oil and grease. Risk
of accidents.
Never transport the equipment on highways or paved roads. Avoid
that the tractor wheels touch the drawbar in sharp turns.
Always use the safety locks to carry out any maintenance or to
transport the equipment.
Working safely
Have extreme caution when operating with the power take-off (PTO),
which you should not get closer during operation.
The presence of any other people on the tractor or equipment is
stricly forbidden.
7
PD / PCA / PCA PLUS - Rev. 01 - Jun/22
2. To the operator
Working safely
Keep away from the moving parts of the equipment, as they can be
sharp and cause accidents. Always use safety gloves.
When operating the equipment, do not allow any people to get too
close or underneath it. Avoid accidents that may be caused by the up
and down movements of the moving support.
Have extreme caution when driving under electrical power lines. Any
contact may result in severe shocks, injuries or death.
Do not open or remove the safety protections while the equipment is
on.
Shut down the engine and remove the tractor key from the ignition
before carrying out any maintenance or repair on the equipment.
Keep a safe distance from the equipment during the job.
Every professional should be oriented when lifting and carrying heavy
loads to avoid any serious accident that a bad execution of this process
may cause..
8PD / PCA / PCA PLUS - Rev. 01 - Jun/22
2. To the operator
Personal protective equipment (PPE)
The personal protective equipment must be used as stated by the Ministry of LaborThe personal protective equipment must be used as stated by the Ministry of Labor
and Employment on the working standards.and Employment on the working standards.
Personal clothing must be used. Avoid tight or hanging clothes thatPersonal clothing must be used. Avoid tight or hanging clothes that
may become entangled to the moving parts of the equipmentmay become entangled to the moving parts of the equipment.
Use earplugs or muffs to avoid loud noises that may lead toUse earplugs or muffs to avoid loud noises that may lead to
complications or hearing loss.complications or hearing loss.
The foot protection will prevent damages from the impact of objects,
nails or bolts scattered on the floor, crushing hazards, injuries from
falling on slippery or wet areas and so on. Always use foot protecion
during the job.
Use gloves to protect your hands and arms from the abrasiveUse gloves to protect your hands and arms from the abrasive
elements that may cause cuts or scratches. Whenever assembling orelements that may cause cuts or scratches. Whenever assembling or
disassembling the equipment, always use safety gloves.disassembling the equipment, always use safety gloves.
The safety glasses protect the eyes from any type of debris that wouldThe safety glasses protect the eyes from any type of debris that would
cause irritation or injuries.cause irritation or injuries.
Use the respiratory protection to filter the air and avoid that any dirtUse the respiratory protection to filter the air and avoid that any dirt
particles or material debris may be inhaled by the worker, what wouldparticles or material debris may be inhaled by the worker, what would
compromise its respiratory system.compromise its respiratory system.
The safety helmet protect the worker's head from any injury that wouldThe safety helmet protect the worker's head from any injury that would
be caused by falling objects.be caused by falling objects.
- Only certied PPE must be used.
NOTE
- Safety must be present on every working step to avoid accidents, such as the
impact of objects, falling, noises, cuts and similar. Therefore, the working person is
subject to inner and outer damages to the body.
ATTENTION!
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere TATU Bagger Handbücher
