Tatung TWN-5213 CU Bedienungsanleitung

2005/6/27 page1

TATUNG

Wireless Thin Client

TWN-5213 CU

TATUNG Wireless Thin Client (TX-2000) User Guide

In the interest of continuing product improvement, TATUNG Co. reserves the right to change product specifications

and information in this document without notice.

TATUNG Co. makes no warranty of any kind with regard to this document, including, but not limited to, the implied

warranties of merchantability and fitness for a particular purpose. TATUNG Co. shall not be liable for any errors

contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of

this document or the examples herein.

This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this

document may be photocopied, reproduced, adapted, or translated to another language without the prior written

consent of TATUNG Co., except as allowed under the copyright laws.

The programs that control this product are copyrighted and all rights are reserved. Reproduction, adaptation, or

translation of those programs without prior written permission of TATUNG Co. is also prohibited.

Tatung is the registered trademark of TATUNG Co.

Microsoft, Windows XP embedded, and the Windows logo are either registered trademarks or trademarks of

Microsoft Corporation in the United States and/or other countries. Microsoft products are licensed to OEMs by

Microsoft Licensing, Inc., a wholly owned subsidiary of Microsoft Corporation.

All other brand names and products names used in this document are trade names, service marks, trademarks, or

registered trademarks of their respective owners.

TATUNG Co.

22 Chungshan North Road, Section 3

Taipei, Taiwan 104

R.O.C.

http://www.tatung.com

TATUNG Wireless Thin Client (TX-2000) User Guide

Messages

Messages are used in this document to bring important information to your attention. Different types of messages are

defined as follows:

CAUTION!: A Caution alert informs you that improper use of equipment or failure to follow safety instructions may

cause data loss or equipment damage.

WARNING!: A Warning alert informs you that improper use of equipment or failure to follow safety instructions may

cause bodily injury.

NOTE!: A Note is an advice that helps you make the best use of TWN-5213 CU.

Safety Instructions

You must read through all safety instructions before using TWN-5213 CU. The following information contains

concepts that you must fully understand in order to avoid property damage or body injury.

CAUTION!

• Always use standard battery packs supplied with the TWN-5213 CU. Other battery packs may have different

specifications and cause damages to TWN-5213 CU.

• Do not expose the battery pack to other metal objects.

• Do not use or place TWN-5213 CU near sources of heat or expose it to direct sunlight for an extended period of

time. Store it in a cool and dry place.

• Do not push or apply force to the TFT screen.

• Do not use pens or sharp objects to write on the screen. Always use the stylus to tap or draw on the TFT screen.

WARNING!

• Using worn-out or damaged power cords may result in electric shock or fire.

• Avoid keeping a steady position when using TWN-5213 CU for prolonged period of time. Periodic exercises and

breaks are recommended to prevent any physical discomfort.

• Always contact an authorized TATUNG service provider for assistance if any repair or adjustment is required.

TATUNG Wireless Thin Client (TX-2000) User Guide

Table of Contents

1. Overview............................................................................................................................................................ 5

2. Equipment Checklist ........................................................................................................................................ 6

3. TWN-5213 CU Specification............................................................................................................................. 7

4. TWN-5213 CU Features .................................................................................................................................... 8

4.1 Front View of TWN-5213 CU........................................................................................................................................8

4.2 Top View of TWN-5213 CU........................................................................................................................................11

4.3 Left View of TWN-5213 CU ........................................................................................................................................11

4.4 Right View of TWN-5213 CU......................................................................................................................................12

4.5 Back View of TWN-5213 CU ......................................................................................................................................13

5. Quick-Start Procedure ................................................................................................................................... 15

5.1 Starting TATUNG TWN-5213 CU...............................................................................................................................15

5.2 Booting Logo ..............................................................................................................................................................18

5.3 Device Settings ..........................................................................................................................................................20

5.4 LCD Panel Setting......................................................................................................................................................21

5.7 Recalibrating the Touch-Screen.................................................................................................................................24

5.8 Using the Input Method ..............................................................................................................................................26

5.9 Resetting TWN-5213 CU............................................................................................................................................27

6. Software Applications.................................................................................................................................... 28

7. Restrictions..................................................................................................................................................... 29

8. Troubleshooting ............................................................................................................................................. 30

9. Support and Service....................................................................................................................................... 32

10. Warranty ........................................................................................................................................................ 33

11. Regulatory and Safety Notices ................................................................................................................... 38

TATUNG Wireless Thin Client (TX-2000) User Guide

1. Overview ...........................................................................

Welcome to choose TATUNG®Wireless Thin ClientTM. This wireless device is designed to support customers in

building a customizable product for different vertical markets. Both first-time and experienced users can quickly

learn how to operate the TATUNG Wireless Thin Client from this guide.

TATUNG Wireless Thin Client (TX-2000) User Guide

2. Equipment Checklist........................................................

Carefully unpack the TATUNG Wireless Thin Client from the box. Check to make sure that the following accessories

are included in the box. If you find any accessory missing or damaged, please contact TATUNG representatives

immediately.

 TWN-5213 CU

 Stylus

 AC Adapter

 AC Power Cord

 Battery Pack

Embedded Accessories

 Backup Battery

 RTC Battery

 CompactFlash Storage Card (512MB)

TATUNG Wireless Thin Client (TX-2000) User Guide

3. TWN-5213 CU Product Specification..............................

Items Specification

CPU Transmeta TM5800 733MHz

OS Microsoft Windows XP EmbeddedSoftware

Bundle software Trail Soft Keyboard

Memory 256MB DDR-SODIMM

Storage 512MB Compact Flash

Type 10.4 inch color LCD

Resolution 1024 x 768 16bit 65536 color

10.4" Toshiba LCD resolution: 1024x768(XGA) and

transmissive display type.

Display

Life time 10,000 hrs (Lamp MTBF Life)

Touch panel 10-Bits A/D controller with SMK Touch Screen with Stylus

Pen

Button Analog type

Network 802.11b and 10/100BASE-TX(RJ-45)

Audio Internal speaker (Mono) x 1

Internal microphone(Mono) x 1

USB USB2.0 x 2

Card slot PCMCIA Type-II (Card Bus type) x 1

I/O connector 10/100BASE-TX (RJ-45) or RS232C can be used

exclusively with optional cable.

I/O

Audio Headphone terminal x 1

Microphone terminal x 1

Power Li-ion Battery pack, AC adapter

Main battery Type Rechargeable Li-ion battery, 2200mAh, 11.1V

Operation time About 2hrs

Charging time About 2.5hrs

Type Rechargeable Ni-MH battery, 40mAh, 7.2V

Backup time About 30min ( system in suspend mode)

Back up battery

Charging time About 12hrs

Type Rechargeable Li-battery, 100mAh, 3VRTC battery

Charging time About 50hrs

Size, Weight 290 x 220 x 31(Min)mm, About 1.5kg

Operation Temp.:5 to 35 deg. cent., Humidity: 15 to 85%Environment

Storage Temp.:-20 to 60 deg. cent., Humidity:15 to 85%

Terminal FCC, CE,CB, ULCertification

AC adapter Electrical appliance and Material Safety Law

OS Windows XP Embedded

TATUNG Wireless Thin Client (TX-2000) User Guide

4. TWN-5213 CU Features....................................................

4.1 Front View of TWN-5213

1. Push function key 1, and you can execute “On Screen Keyboard”.

2. Push function key 2, and you can execute “Internet Explorer”.

3. Push function key 3, and you can execute “File Manager”.

4. Push function key 4, and you can execute “Device setting” utility, which is developed by

Tatung. It includes four functions: brightness adduction, double-tap setting, button setting,

and touch panel calibration.

5. Direction Key

6. Enter Key

7. Power LED

8. Battery Charge LED

9. RF Strength LED

10. Built-In Microphone

11. Built-In Speaker

TATUNG Wireless Thin Client (TX-2000) User Guide

12. TFT Touch-Screen Panel (Perform operations and input data by tapping and writing directly on

the screen)

TATUNG Wireless Thin Client (TX-2000) User Guide

TWN-5213 CU LED indicators display useful information in the battery’s current status and charge level:

LED

Indicator

LED Color

Power LED Battery Charge LED Wireless Signal LED

Off Power Off or

Suspend Mode Not Charging Signal Strength =0

(No signal)

Green Power On Fully Charged Signal Strength =4,5

(Excellent)

Amber Low Battery <=8% Charging Signal Strength =2,3

(Good)

Red Extremely Low Battery

(Auto Suspend) <=4%

Charge Error

(Or No Battery Installed)

Signal Strength =1

(Very Low)

Inhaltsverzeichnis

Andere Tatung Tablette Handbücher

Tatung

Tatung TTAB-910E Bedienungsanleitung

Tatung

Tatung TTAB-B12D Bedienungsanleitung

Tatung

Tatung WEBPAD TWN-213CU Bedienungsanleitung

Beliebte Tablette Handbücher anderer Marken

Laser

Laser MID-1060 Benutzerhandbuch

MUNBYN

MUNBYN IRT09J Kurzanleitung

Motorola

Motorola MC3090R - Win CE 5.0 Professional 520 MHz Bedienungsanleitung

Dell

Dell Latitude ST Betriebsanleitung

Venturer

Venturer WT9L11 Bedienungsanleitung

EDUGEAR

EDUGEAR UnoBook Bedienungsanleitung

Philips

Philips PI3210G/58 Bedienungsanleitung

TwinMOS

TwinMOS TwinTAB-T102D1 Bedienungsanleitung

Archos

Archos 9.7 xenon Bedienungsanleitung

HANNspree

HANNspree HANNspad SN70T3 Bedienungsanleitung

Philips

Philips PI3105W2/55 Bedienungsanleitung

Zeki

Zeki TBDB763B Bedienungsanleitung

Ricoh

Ricoh eQuill Bedienungsanleitung

DT Research

DT Research DT365CT Montageanleitung

MaxWest

MaxWest Nitro Phablet 9 Bedienungsanleitung

LG LG-V935 Bedienungsanleitung

Aaeon

Aaeon RTC-1000A1 Bedienungsanleitung

Trevi

Trevi TAB 9 C8 Bedienungsanleitung