Usage method：
Before use, make sure that the voltage of the local electric outlet is in
line with the set voltage of the kettle (the corresponding voltage value in
the direction of the black plastic “Ø”1 word at the bottom of the kettle,
the factory setting is the AC220-240V position."
Before the first use, the electric kettle should be filled to the highest
water level, boil, pour, rinse with clean water, repeat one or two times to
remove the dust which is generated during production, storage process.
Please use the product under the following steps:
1. Turn the bottom voltage selector switch to the matching voltage
(turn clockwise to AC100-120V or counterclockwise to AC220-240V),
open the lid of the kettle, inject adequate amount of water (water
cannot exceed the maximum water level), close the lid and plug the
electric plug.If the voltage isn’t matched, it will damage the electric
kettle or the product boils water very slowly.(The factory setting is in
AC220-240V position)
2. Press the boiling water switch to "I", the indicator lamp is on and the
product start heating.
3. When water is boiled, the power is cut off automatically, but the
boiling switch still points to the "1" position and the product is in heat
preservation state.
4. When the water is cooled to a certain temperature, the kettle begins
to preserve temperature and heat water.
5. If you do not need heat preservation, please turn off the boiling
switch manually to “O” position and unplug it after boiling water.
6. Due to different local voltage, climate, air pressure of various region,
the difference of boiling time is a normal phenomenon.
7
