Taylor TE10C Bedienungsanleitung

Digital Scale

Balance Numérique

Báscula digital

Instruction Manual

Manuel d’instructions

Manual de instrucciones

Leading the Way in Accuracy®

TE10C / TE32C

TE10C capacity, capacité, capacidad: 10 lb x 0.1 oz / 5kg x 1g

TE32C capacity, capacité, capacidad: 2 lb x 0.1 oz / 1kg x 1g

Thank you for purchasing a

Taylor®Digital Scale.

Your Taylor®scale is an example of superior

design and craftsmanship.

Please read this instruction manual

carefully before use.

Keep these instructions handy

for future reference.

To turn the scale on, press the button marked “ON/OFF”. The

display will rst show “8888 ” followed by “0.0” (oz) or “0” (g).

Press “ON/OFF” to manually turn the scale off. The scale will

also automatically turn off after approximately 2 minutes

of nonuse.

Your scale is set at the factory to weigh in pounds/ounces.

Press the “LB/KG” to switch to kilogram/gram units of

measurement. (The scale will reset to pounds/ounces when

it is turned off.)

To Turn the Scale On and Off

To Change Units of Measurement

When the display shows zero, it is ready to weigh an

object. Multiple objects can be placed on the platform, up

to the scale’s weight capacity. The display will show the

total weight of all objects on the platform. When one of the

objects is removed from the platform, the weight of the

remaining items will continue to display.

Overload Warning: Should “Err” appear on the display

during a weighing, remove the weight immediately;

otherwise, permanent damage could occur.

Weighing Operation

You may wish to weigh ingredients in a bowl or other con-

tainer (not included). In this case, you will need to tare, or

offset, the weight of the bowl so that only the weight of the

ingredients is displayed.

1. While the scale is on, place the empty container on

the platform. Press the “TARE/ZERO” button. The weight

will reset to zero.

2. Place the item in the container. The weight of the item

alone will display.

3. To weigh additional items in the same container, continue

to press “TARE/ZERO” to tare out the weight of each

new item.

4. When weights have been tared out, the LCD will show

a negative number when the weight is removed from

the scale. To reset the scale back to zero, press the

“TARE/ZERO” button.

Tare Operation

This scale operates on an AC adapter (included) or one

9-Volt alkaline battery (not included).

Power Sources

To power the scale using the adapter, insert the connector

plug into the jack at the back of the scale, and plug the

other end into the proper electrical outlet.

Electrical Power

1. Use one 9-Volt alkaline battery (not included).

2. Remove the battery compartment cover on the bottom of

the scale.

3. Attach the battery to the 9-volt battery snap. Place the

battery into the compartment.

4. Replace the compartment cover.

5. Replace the battery when “Lo” appears on the LCD.

6. Remove the battery if the scale will not be used for a long

period of time.

Battery Power

Auto shut-off Feature

The scale will automatically shut off after 2 minutes of non-

use to conserve the battery. The auto-shut off feature can

be disabled to allow the scale to operate continuously. To

disable the auto-shut off feature:

1. While the scale is off, press and hold the “ON/OFF” button.

2. While continuing to hold the “ON/OFF” button, press

and hold the “LB/KG” button.

3. Release the buttons. The display will show “ ”

or “ ”.

4. Press the “ON/OFF” button to toggle between

auto-off (“ ”) or non auto-off (“ ”).

5. Press the “LB/KG” button to select the desired

setting. The display will show “8888” then “0.0”.

6. Set up is complete. The scale is ready for use.

Troubleshooting

• If there are no items on the platform, but the LCD does not

show zero, press the “TARE/ZERO” button to reset the

scale to zero.

• Overload Warning: Should “ ” appear on the display

during a weighing, this indicates that the maximum

weighing capacity of the scale has been exceeded.

Remove the weight immediately; otherwise, permanent

damage could occur.

This scale is engineered to give you years of satisfactory

service if you handle it carefully. Here are a few precautions:

1. Always read instructions thoroughly to ensure that you have the full

benet of all the unit’s features.

2. DO NOT immerse unit in water, as doing so will cause damage to

internal components and void the warranty. If you spill liquid on it, dry

it immediately with a soft, lint-free cloth.

3. DO NOT clean the unit with an abrasive or corrosive material. This

may scratch the plastic parts and corrode the electronic circuits.

4. DO NOT subject the units to excessive force, shock, dust,

temperature or humidity. This may result in malfunction, shorter

electronic life span, damaged battery and distorted parts.

5. DO NOT operate or store the scale in high temperature or humidity

conditions. The heat or moisture may interfere with the scale’s internal

components.

6. DO NOT tamper with the unit’s internal components. Doing so will

invalidate the warranty on the units and may cause damage. The unit

contains no user-serviceable parts.

7. This scale is an extremely sensitive weighing device. To avoid damage

to the unit or the battery, do not store anything on the scale.

8. Remove the battery if the scale will not be used for a long period

of time.

9. Do not dispose of batteries in re. Batteries may explode or leak.

Precautions

Capacity:

TE10C – 10 lbs x 0.1 oz / 5kgs x 1g

TE32C - 2 lbs x 0.1 oz / 1kg x 1g

Dimensions: 5 7/8" x 6 5/8" x 11/2"

Platform size: 5 7/8" x 4 3/4"

LCD digits: 0.8 inch

Type: 7 segment

Operates on: AC adapter (included) or one 9-volt battery (not included)

This product is warranted against defects in materials or workmanship (excluding batter-

ies) for one (1) year from date of original purchase for the original purchaser. It does not

cover damages or wear resulting from accident, misuse, abuse, or unauthorized adjust-

ment and/or repair. Should this product require service (or replacement at our option)

while under warranty, please pack the item carefully and return it prepaid, along with

receipt showing date of purchase and a note explaining reason for return to:

Taylor Precision Products

2220 Entrada Del Sol, Suite A

Las Cruces, New Mexico 88001

Customer Service Phone: 1-800-225-4834

Customer Service Fax: 1-575-526-4347

www.taylorusa.com

There are no expressed warranties except as listed above. This warranty gives you

specic legal rights, and you may also have other rights which vary from state to state.

For additional product information, or warranty information outside the USA, please

Taylor® and Leading the Way in Accuracy® are registered trademarks of Taylor

Made to our exact specications in China.

NOT LEGAL FOR TRADE

Specications

One Year Limited Warranty

TE10C / TE32C 11.11

Merci de votre achat d’une

balance numérique Taylor®.

Votre balance Taylor® est un exemple

de design et de travail supérieurs.

An d’en soutirer le maximum,

veuillez lire attentivement votre

manuel d’instructions avant

d’utiliser l’appareil.

Conservez ces instructions à portée

de la main à titre de référence.

Pour mettre l’appareil en marche, appuyez sur le bouton

« ON/OFF » (marche/arrêt). L’afchage indiquera “8888”,

suivi de “0.0” (oz) ou “0” (g). Appuyez sur le bouton « ON/

OFF » pour mettre la balance hors tension manuellement.

La balance se mettra automatiquement hors tension après 2

minutes d’inactivité.

La balance est réglée en usine indiquer les poids en livres/

onces. Pour modier l’afchage au système métrique (i.e.

kilogrammes/grammes), appuyez sur le bouton « LB/KG ».

(La balance sera réinitialisée au système livres/onces

lorsqu’elle sera mise hors tension).

Pour mettre l’appareil en marche ou éteindre

Pour changer l’unité de mesure

Lorsque l’écran afche zéro, l’appareil est prêt à peser.

Plusieurs objets ne dépassant pas la capacité de pesage

de la balance peuvent être placés sur le plateau. L’écran

afchera le poids total de tous les objets sur le plateau. Si un

des objets est retiré du plateau, le poids des articles restants

restera afché. Avertisseur de surcharge: Si “Err” apparaît

sur l’afcheur ACL durant une opération de pesage, enlevez

immédiatement l’item se trouvant alors sur le plateau de la

balance, à défaut de quoi des dommages permanents à la

balance pourraient s’ensuivre.

Fonctionnement de Pesée

Vous pouvez vouloir peser des ingrédients dans un bol ou

un autre contenant (non inclus). Dans ce cas, vous devez

déduire le poids du bol ou du contenant de sorte que seul le

poids des ingrédients sera afché (le terme français pour ce

type d’opération est “tarage”).

1. Lorsque l’appareil est en marche, placez le contenant vide

sur le plateau de la balance. Appuyez sur le bouton

« TARE/ZERO » (tarage/zéro). Le poids afché sera remis

à zéro.

2. Placez l’objet dans le récipient. Le poids de cet objet seul

sera afché.

3. Pour peser des objets supplémentaires dans le même

récipient, continuez à appuyer sur «TARE/ZERO» pour

déterminer le poids à vide de chaque objet additionnel.

4. Lorsque le poids de tous les objets a été déterminé,

l’écran ACL afchera un nombre négatif lorsqu’un poids

est retiré de la balance. Pour réinitialiser le compteur,

appuyez sur la touche «TARE/ZERO».

Opération de Tarage

Cette balance fonctionne lorsque branchée à une prise de courant

régulière à l’aide d’un adaptateur courant alternatif (ou CA, inclus)

ou à l’aide d’une pile alcaline de 9 volts (non incluse).

Sources d’alimentation électrique

Pour utiliser votre balance en utilisant l’adaptateur, insérez

le connecteur de l’adaptateur dans le connecteur situé à

l’arrière de la balance, puis branchez l’adaptateur dans une

prise de courant.

Alimentation par branchement à une prise de courant

Andere Handbücher für TE10C

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Taylor Skala Handbücher

Taylor

Taylor TS10 Bedienungsanleitung

Taylor

Taylor 7548 Bedienungsanleitung

Taylor

Taylor 5273274 Bedienungsanleitung

Taylor

Taylor 7519 Bedienungsanleitung

Taylor

Taylor 7410 Bedienungsanleitung

Taylor

Taylor 7549 Bedienungsanleitung

Taylor

Taylor The Biggest Loser 3865BL Bedienungsanleitung

Taylor

Taylor TE10T Bedienungsanleitung

Taylor

Taylor 7528 Bedienungsanleitung

Taylor

Taylor 7402 Bedienungsanleitung

Taylor

Taylor The Biggest Loser 3840BL Bedienungsanleitung

Taylor

Taylor 3842 Bedienungsanleitung

Taylor

Taylor 3701-44 Bedienungsanleitung

Taylor

Taylor 7410 Bedienungsanleitung

Taylor

Taylor 5703 Bedienungsanleitung

Taylor

Taylor 7335 Bedienungsanleitung

Taylor

Taylor 7029 Bedienungsanleitung

Taylor

Taylor 3838 Bedienungsanleitung

Taylor

Taylor 7356 Bedienungsanleitung

Taylor

Taylor 7042EF Bedienungsanleitung

Taylor

Taylor 7562W Bedienungsanleitung

Taylor

Taylor TE11FT Bedienungsanleitung

Taylor

Taylor 3800N Bedienungsanleitung

Taylor

Taylor 3875 Bedienungsanleitung

Beliebte Skala Handbücher anderer Marken

AWS

AWS ZEO-50 Bedienungsanleitung

Gima

Gima Glass Body Fat Analyzer Stücklistenhandbuch

Seca

Seca 374 Bedienungsanleitung

TEC

TEC TEC SL59 SERIES Bedienungsanleitung

Axis

Axis B/E Series Bedienungsanleitung

Alecto

Alecto ACW-40 Bedienungsanleitung

Rice Lake

Rice Lake MSI-4260 IS Bedienungsanleitung

IKA

IKA RCT basic safety control Bedienungsanleitung

ADE

ADE M20011 Bedienungsanleitung

Duronic

Duronic KS3000 Bedienungsanleitung

Digi

Digi SM-720 Bedienungsanleitung

Cardinal

Cardinal CS Series Bedienungsanleitung

Korona

Korona Kastella Bedienungsanleitung

A&D

A&D FC-50Ki Bedienungsanleitung

BDA

BDA CAMARGUE Bedienungsanleitung

Tanita

Tanita HD-357 Bedienungsanleitung

Leifheit

Leifheit 03173 Bedienungsanleitung

Lumme

Lumme LU-1340 Bedienungsanleitung