TB-Electronics F-SCAN MOBILE NT Bedienungsanleitung
- 1 -
Frequency Synthesizer
F-SCAN MOBILE NT
and
F-SCAN MOBILE NT DUO
Firmware Version FSC V2.x
INSTRUCTION MANUAL
This symbol identifies the equipment as type B
Attention: CONSULT ACCOMPANYING DOCUMENTS
Ordering information: F-SCAN MOBILE NT Product id: FTB129
F-SCAN MOBILE NT DUO Product id: FTB133
- 2 -
WARNING AND NOTES...................................................................................................................................................- 3 -
Preface.................................................................................................................................................................................- 4 -
Introduction..........................................................................................................................................................................- 4 -
Two generators – DUO MODE ........................................................................................................................................ - 5 -
First steps ............................................................................................................................................................................- 5 -
The shipment from the factory includes:.........................................................................................................................- 6 -
Elements for operation for F-SCAN MOBILE NT (FTB129) ...................................................................................... - 7 -
Elements for operation for F-SCAN MOBILE NT DUO (FTB133) ............................................................................. - 7 -
Signal forms delivered to Multi-signal-output port .........................................................................................................- 8 -
Factory settings ..................................................................................................................................................................- 9 -
MAIN menu ....................................................................................................................................................................... - 10 -
The menu “123“ ................................................................................................................................................................- 11 -
The CONTINUE feature ..................................................................................................................................................- 12 -
The menu “DUO“.............................................................................................................................................................- 12 -
DUO MODE ...................................................................................................................................................................... - 13 -
How to select a program from the menu “123“ or “DUO” ........................................................................................... - 13 -
How to copy, paste and cut a program .........................................................................................................................- 14 -
How to input a frequency value...................................................................................................................................... - 14 -
The properties of frequencies.........................................................................................................................................- 14 -
How to start, pause, or stop a program......................................................................................................................... - 15 -
The menu DIRP................................................................................................................................................................ - 16 -
How to prepare for a DIRP and run it ............................................................................................................................ - 17 -
The menu SWEEP........................................................................................................................................................... - 17 -
The menu SETUP ............................................................................................................................................................- 18 -
CHIPCARD option............................................................................................................................................................ - 19 -
ChipCard for data exchange........................................................................................................................................... - 19 -
Use of the ChipCard PLUS ............................................................................................................................................. - 20 -
Integration of programs from other sources .................................................................................................................- 21 -
Technical data ..................................................................................................................................................................- 22 -
Declaration of Conformity / Konformitätserklärung .....................................................................................................- 23 -
- 3 -
WARNING AND NOTES
WARNING: The F-SCAN MOBILE generates frequencies. The use of
other accessories than those supplied with the unit – or described
here – could cause malfunctions or become a hazard to the user.
The warranty would be forfeit.
ATTENTION: The unit, all accessories, connectors and cables must be
visually inspected for damage frequently. We recommend a yearly
functional test by a professional.
.
ATTENTION: The device’s integrated functions allow biological tests
and applications described in the publications of Dr. H.R.CLARK. They
are also suitable for applications commonly named after R.R.Rife. The
F-SCAN MOBILE is not a medical device. It is used under the sole
responsibility of it’s operator WITHOUT LIABILITY TO THE
MANUFACTURER.
- 4 -
Preface
One of our prime objectives as a Swiss company is the development and manufacturing of
precise and reliable products based on many years of experience. Some of our products are
well known and utilized internationally. As a small company we can react fast to changed
customer requirements. May your use of the F-SCAN MOBILE be beneficial.
Introduction
The FREQUENCY SYNTHESIZER F-SCAN MOBILE NT has been optimized for mobile and
stationary use. The device is the result of our continuing effort to improve and modernize the F-SCAN
product family.
The color touch screen, combined with the latest functional technology, offers a user friendly system
with outstanding performance.
The device generates precise sine signals (permanent positive) and square signals (zero – symmetric
or permanent positive) and sends them under software control to an output port.
A special feature is the integrated SMART-WAVE. If selected, it will modulate the assigned wave form
with a high frequency.
Special accessories, like Flat Magnetic Coil Adapter, can be connected to the PowerPort without a
separate amplifier.
As an option, the device is equipped with a second signal generator. This type of device has a DUO
output instead of the PowerPort.
The intensity of the square signals delivered can, depending on the application, either be adjusted
manually or automatically.
A TIMER can be assigned individually to each frequency or as a global function.
The settings for the special application modes WOBBLE, ENVELOP, and for the signal amplitudes,
are also accessible.
The DIRP-function (Dual Integration Resonance Procedure) can be used to scan automatically for
resonance answers to frequencies send to a user. The procedure can be used in the complete
frequency band of the device. Graphical edit functions support the analysis of the DIRP – results.
A Lithium Polymer battery supports the mobile operation of the device for 4 hours without an external
power source.
A broad band application of frequencies (SWEEP) can be selected from an individual touch screen
window.
The device provides a storage capability for up to 100 applications of up to 50 frequencies, complete
with their names, and the complete results of DIRP runs. In addition, up to 460 user defined frequency
sets (up to 30 values each) can be saved in the F-SCAN MOBILE NT memory. When used in DUO
mode, 25 sets of two frequencies can be filled by the user with individually selected applications
independent from single channel memory. Each of the 100 banks can be erased or reused.
DUO protocols can be memorized and recalled on ChipCard PLUS in their own section without
interfering the standard single channel programs.
Single protocols can be selected to be copied from the standard ChipCard into the device so that not
the entire memory need to be loaded.
CONTINUE: with the continue feature, you can queue as many of protocols as you like. Just place the
CONT instruction at the end of a protocol and let the machine know which program has to follow.
PROTECT button to avoid accidental modification of protocols.
A powerful state of the art 32-bit micro-processor controls all functions.
Customized ChipCard-functions support the data transfer between our products F-SCAN MOBILE NT,
F-SCAN3, F-SCAN4, F-SCAN COMPACT and the MinDevice.
We are convinced that the touch panel operation will be mastered by all users without problems.
- 5 -
Two generators – DUO MODE
The most important benefit compared to other frequency devices is that the F-SCAN MOBILE NT
DUO is equipped with a second generator which can be used to provide a different frequency on
another wire of the application cable to the PP (=DUO) port. This means: two devices in one.
Frequency Specific Microcurrents FSM applications can easily be generated. When using the device
in standard mode, the second generator creates the same signal as the master generator. When using
in DUO MODE, the second generator outputs the frequency from the even number of a running
program as described in the chapter DUO MODE.
First steps
The charge level of the Lithium-Ion battery of the F-SCAN MOBILE NT DUO must be checked first
after the device and its accessories have been unpacked.
CHARGE YOUR F-SCAN MOBILE NT DUO BEFORE FIRST USE FOR AT LEAST 4
HOURS. CONNECT THE DEVICE AND THE POWER SUPPLY WITH THE USB CABLE
AND PLUG THE POWER SUPPLY INTO AN AC-OUTLET. IF THE DEVICE IS POWERED
ON DURING THE CHARGING PROCEDURE, LESS ENERGY FOR ENERGIZING THE
BATTERY PACK IS AVAILABLE AND THE CHARGING PROCEDURE TAKES LONGER.
THE LCD MAY SHOW APPEARING AND DISAPPEARING STRIPES DURING THE
CHARGING AND THE DEVICE MAY WARM UP SLIGHTLY. THESE EFFECTS ARE
NORMAL.
IF YOUR DEVICE IS EQUIPPED WITH WIRELESS CHARGING OPTION: Place the F-
SCAN MOBILE NT DUO on the charging pod in the center so that you can see the
indicator light on the pod changing from red to blue.
- 6 -
The shipment from the factory includes:
The device FTB129
F-SCAN MOBILE with instruction manual FTB128
Wall charger FTB224
Stainless steel electrodes FTB202A
Application cable for electrodes FTB308
2 sets of self-adhesive pad-electrodes FTB041
DIRP sensor FTB303
USB cable FTB223
Application cable for DUO FTB033 (only included to F-SCAN MOBILE NT DUO)
- 7 -
Elements for operation for F-SCAN MOBILE NT (FTB129)
Elements for operation for F-SCAN MOBILE NT DUO (FTB133)
ON--button
A brief contact switches the unit ON.
Mini-USB
connector for
charger and data
transfer
Multi-
signal output
port
PowerPort
FOR POWER
APPLICATION
PARTS SUCH LIKE
MAGNETIC COIL
ONLY !
ON--button
A brief contact switches the unit ON.
Mini-USB
connector for
charger and data
transfer
Multi-
signal output
port
DUO OUTPUT
FOR APPLICATIONS
WITH TWO SIGNALS
SIMULTANEOUSLY
- 8 -
Signal forms delivered to Multi-signal-output port
PLEASE NOTE THAT THE DUO-OUTPUT (PP) DELIVERS SINE WAVE SIGNALS DC-
OFFSET ONLY ON BOTH CHANNELS. THE AMPLITUDE CAN BE ADJUSTED
SIMULTANEOUSLY FOR BOTH CHANNELS.
SINE (DC-OFFSET), for FTB133 (DUO) adjustable
0Vpp to 10 Vpp
SQUARE,
0-symmetrical,
Full Wave 0Vpp to 24Vpp
SQUARE,
permanent positive,
Half Wave
0Vpp to 12Vpp (DC-OFFSET)
SMART,
permanent positive,
Half Wave
0Vpp to 12Vpp (DC-OFFSET), a high
frequency covering the application frequency.
- 9 -
Factory settings
Language on screen: English or German
Application time per frequency: 3:00 Minutes
(adjustable between 0:30 and 59:59)
Signal strength: 80% of maximum of 12Vpp
(adjustable +/- in steps of 1%)
Signal form: AUTO (Sine, Square Full Wave, Half Wave, SMART and OFF
selectable). AUTO = Square Half Wave if lower than 65000 Hz,
Sine above 65000 Hz.
Memory of ”123“ is empty.
Memory of ”ABC“ and/or “DUO” is empty and locked.
- 10 -
MAIN menu
Touch the ON button briefly. The screen must show the following:
The information displayed means:
- SERIAL: Serial number of device
- ONS: Number of uses
- Ds: Number of DIRP procedures
- FLASH ID: identifies the type of internal memory.
FFFFFFFF would indicate a memory defect. The device must then be checked by a
professional.
- VERSION V1.00B00 Version of software active in the device.
Startup screen of the F-SCAN MOBILE NT DUO FTB133
OFF switch. Press here to power
off the device
Battery charge indicator. Green when battery
is 100 % charged. Blinks yellow-green when
charging.
Communication indicator. Shows a changing
number when under software control
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Beliebte Gleichstromantrieb Handbücher anderer Marken
Vincent Associates
Vincent Associates UNIBLITZ ED12DSS Bedienungsanleitung
EKSMA OPTICS
EKSMA OPTICS DQ-100-4 Stücklistenhandbuch
Chamberlain Garog
Chamberlain Garog D Series Bedienungsanleitung
Parker
Parker PDS Series Bedienungsanleitung
Festo
Festo DGC G Series Einrichtungshandbuch
Binks
Binks QS-5012-1-CE Bedienungsanleitung
