TBB SP Series Bedienungsanleitung

SP60/SP80 User Manual V1.3

TBB Power Co.,Ltd

SP solar charge controller

MPPT SP60-150

MPPT SP80-150

USER MANUAL

Version 1.3

Date: August. 2015

SP60/SP80 User Manual V1.3

TBB Power Co.,Ltd

SP60/SP80 User Manual V1.3

TBB Power Co.,Ltd

TBB Power is a dedicated designer and manufacturer of sophisticated and environmentally

rugged power electronics equipment.

We are offering a wide range of power conversion product from battery charger, standalone

inverter, inverter charger combination and solar charge controller.

We ensure consistent product quality by subjecting every product to strictly choice of superior

quality components, rigorous testing and burn-in through out the production process. TBB

Power is certified by TUV in accordance with ISO9001 and can be your reliable power solution

provider.

Unless specially agreed in writing, TBB Power Co.,Ltd

Take no warranty as to the accuracy, sufficiency of suitability of any technical or other

information provided in this manual or other documentation.

Assumes no responsibility or liability for loss or damage, whether direct, indirect,

consequential or incidental, which might arise out of the use of such information

TBB offer standard warranty with its products, taking no responsibility for direct or indirect

loss due to equipment failure.

This manual describes our product features and provides procedure of installations. This manual is

for anyone intending to install our equipment.

TBB Power Co.,Ltd

Web: www.tbbpower.com

Tel: +86-592-5212299

Fax: +86-592-5796070

Email: sales@tbbpower.com

SP60/SP80 User Manual V1.3

TBB Power Co.,Ltd

SP60/SP80 User Manual V1.3

TBB Power Co.,Ltd

General Instruction

Thanks for choosing our products and this manual were suitable for SP60/SP80-150 series MPPT.

This chapter contains important safety and operation instructions. Read and keep this User

Guide well for later reference.

SP MPPT needs to be installed by professionals and please pay attention to the following points

prior to installation:

1> Please check the voltage of battery is same to the nominal input voltage of this charger.

2> Please connect battery to MPPT charge controller first. Positive terminal “+” of battery to

“Bat +” of the MPPT charge controller terminal block. Negative terminal “-” of battery to

“Bat -”of the MPPT charge controller terminal block.

3> Please use the shortest cable to connect and ensure the secure connection.

4> Then connect the MPPT charge controller to PV array. “PV+”terminal on MPPT charge

controller terminal block to Positive terminal of PV array. “PV-”terminal on MPPT charge

controller terminal block to Negative terminal of PV array.

5> While connecting wires, please secure the connection and avoid short cut between positive

terminal and negative terminal of battery, which will cause damage of battery.

6> MPPT charge controller will have high voltage inside. Only authorized electrician can open

the case.

SP60/SP80 User Manual V1.3

TBB Power Co.,Ltd

General Instruction................................................................................................................................................3

..................................................................................................................................................................4

1.0 General Safety Instruction..............................................................................................................................6

1.1 Safety Instruction.......................................................................................................................................6

1.2 General Precaution.....................................................................................................................................6

1.3 Precaution regarding battery operation......................................................................................................6

2.0 Description of main Function.............................................................................................................................7

2.1 General Description....................................................................................................................................7

2.2 Maximum Power Point Tracking ..........................................................................................................8

2.3 Battery charging control.............................................................................................................................9

2.4 TBB premium II charging algorithm..........................................................................................................9

2.5 Auxiliary output ....................................................................................................................................11

2.6 Comprehensive Protection ...................................................................................................................... 12

3.0 Structure......................................................................................................................................................... 13

3.1 Front..................................................................................................................................................... 13

3.2 LCD and control panel......................................................................................................................... 14

3.3 Connection compartment ..................................................................................................................... 15

3.4 Dimension........................................................................................................................................... 16

4.0 Installation .................................................................................................................................................. 17

4.1 PV Array requirement ...................................................................................................................... 17

4.2 Location................................................................................................................................................ 18

4.3 Cable recommendation......................................................................................................................... 19

4.4 Installation............................................................................................................................................ 19

4.4.1 Preparation.................................................................................................................................... 20

4.4.2 Mounting the SP charge controller............................................................................................... 20

4.4.3 Wiring Diagram............................................................................................................................ 21

4.4.4 Battery connection........................................................................................................................ 22

4.4.5 Installing the Battery Temperature Sensor (BTS)........................................................................ 23

4.4.6 PV array connection ..................................................................................................................... 23

4.4.7 Grounding connection.................................................................................................................. 24

4.4.8 Connecting the multiple units ...................................................................................................... 25

4.4.9 Auxiliary output connection......................................................................................................... 26

4.4.10 Communication port connection................................................................................................ 26

4.5 Disconnecting the SP charge controller .................................................................................................. 26

5.0 LCD Menu and Configuration ................................................................................................................... 27

5.1 Status Page............................................................................................................................................... 28

5.2 Information Page..................................................................................................................................... 28

5.3 Setting Page and Configuration ...................................................................................................... 29

5.3.1 Entering into Setting..................................................................................................................... 30

5.3.2 Basic Configuration................................................................................................................... 31

5.3.3 Advanced Configuration .............................................................................................................. 34

5.4 Control Page......................................................................................................................................... 35

SP60/SP80 User Manual V1.3

TBB Power Co.,Ltd

5.5 Event log............................................................................................................................................... 36

5.5.1 Alarm............................................................................................................................................ 36

5.5.2 History.......................................................................................................................................... 37

6.0 Operation ....................................................................................................................................................... 39

6.1 Viewing system status ............................................................................................................................. 39

6.2 Viewing Log Data................................................................................................................................. 40

6.3 Equalization Charging (EQ charging)..................................................................................................... 41

7.0 Specification................................................................................................................................................... 43

8.0 Trouble Shooting........................................................................................................................................... 44

SP60/SP80 User Manual V1.3

TBB Power Co.,Ltd

1.0 General Safety Instruction

1.1 Safety Instruction

As dangerous voltage and high temperature exist within the charge controller, only qualified

and authorized maintenance personnel are permitted to open and repair it.

This manual contains information concerning the installation and operation of the charge

controller. All relevant parts of the manual should be read prior to commencing the installation.

Please follow the local stipulation meantime.

Any operation against safety requirement or against design, manufacture, safety standard, and

are out of the manufacturer warranty.

1.2 General Precaution

1.2.1 Do not expose to rain, snow or liquids of any type，it is designed for indoor use.

1.2.2 To avoid fire and electric shock, make sure all cables selected with right gauge and being

connected well. Smaller diameter and broken cable are not allowed to use.

1.2.3 Please do not put any inflammable goods near to charge controller.

1.2.4 Never place unit directly above batteries, gases from a battery will corrode and damage

the charge controller.

1.2.5 Do not place battery over charge controller

1.3 Precaution regarding battery operation

1.3.1. Use plenty of fresh water to clean in case battery acid contacts skin, clothing, or eyes and

consult with doctor as soon as possible.

1.3.2. The battery may generate flammable gas during charging. NEVER smoke or allow a

spark or flame in vicinity of a battery。

1.3.3. Do not put the metal tool on the battery, spark and short circuit might lead to explosion.

1.3.4. REMOVE all personal metal items such as rings, bracelets, necklaces, and watches while

working with batteries. Batteries can cause short-circuit current high enough to make

metal melt, and could cause severe burns.

SP60/SP80 User Manual V1.3

TBB Power Co.,Ltd

2.0 Description of main Function

Thanks for choosing SP60/80-150 MPPT. The product was delivered with following equipment:

MPPT Charger

Installation kit

a BTS (battery temperature sensor)

a user’s manual

Fig2-1 MPPT Charger, Installation kit and BTS

2.1 General Description

SP60/80-150 is a solar charge controller with built in Maximum Power Point Tracking (MPPT)

technology, which can optimize the PV’s output eliminate the fluctuation due to shading or

temperatures variables. It tracked the maximum power point of a PV array to deliver the

maximum charging current for battery, enabling PV array to increase the output by as much as

30% compared with PWM design.

SP60/80-150 is a multi-voltage MPPT with built in sophisticated battery charging algorithm for

various kinds of lead acid batteries, including AGM, GEL, OPZV, OPZS, Flooded. Data

management with 120days of history record was offered as well. Meantime, version for lithium

ion battery was available upon request.

Thanks to its self cooling design, it is suitable for most rugged environment with dust or bugs.

SP60/80-150 can operate at their full rating in ambient temperatures as high as 40℃.

SP60/SP80 User Manual V1.3

TBB Power Co.,Ltd

Peak efficiency 98%

Built in dynamic Maximum Power Point Tracking

Continuous operation at full power up to 40℃

Self cooling design for high reliability

Built in TBB premium II battery charging algorithm for lead acid battery

Configurable auxiliary contact

Data logging

Extensive networking and communication capabilities

Auxiliary contact

RS485 : communication among TBB products or with others

CAN: Controller Area Network

2.2 Maximum Power Point Tracking

The output power of PV array was affected by sun irradiation level and environment

temperature. The max power point varies a lot under different weather condition.

Fig 2-2 : I-V curve of various irradiation under same temp. Fig 2-3 :P-V curve of various irradiation under same temp.

Max Power Point Tracking allows the maximum harvest of energy from PV array and delivered

it into battery. The MPPT software will continuously adjusts the operating points in an attempt

to find the maximum power point of the array no matter how the weather changes. With MPPT,

we can maximize the usage of the PV array, increasing the system efficiency by maximum 30%.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung