TBB APOLLO MAXX Series Bedienungsanleitung
Apollo Maxx User Manual
WARNING: HIGH VOLTAGE INSIDE
CAUTION: THE DC FUSE MUST HAVE BEENTURNED OFF BEFORE SERVICING
MADE IN CHINA
Apollo Maxx User Manual
Disclaimer
Unless specially agreed in writing, TBB Power Co.,Ltd
Take no warranty as to the accuracy, sufficiency and suitability of any technical or other
information provided in this manual or other documentation.
Assumes no responsibility or liability for loss or damage, whether direct, indirect,
consequential or incidental, which might arise out of the use of such information.
TBB offer standard warranty with its products, taking no responsibility for direct or indirect loss
due to equipment failure.
About this Manual
This manual describes our product features and provides procedure of installations. This manual
is for anyone intending to install our equipment.
General Instruction
Thanks for choosing our products and this manual are suitable for Apollo Maxx All in One Solar
Inverter. This chapter contains important safety and operation instructions. Read and keep this
User Guide well for later reference.
The Apollo Maxx All in One Solar Inverter needs to be installed by professionals and please pay
attention to the following points prior to installation:
Please check the input voltage or voltage of battery is the same to the nominal input voltage of
this inverter.
Please connect the positive terminal “+” of the battery to “+” the input of the inverter.
Please connect the negative terminal “-” of the battery to “-” the input of the inverter.
Please use the shortest cable for connection and ensure the secure connection.
While connecting, please secure the connection and avoid the short circuit between the
positive terminal and the negative terminal of the battery, to protect the battery from damage.
The inverter will have high voltage inside. Only authorized electrician can open the case.
The inverter WAS NOT designed to use in any life retaining equipment.
Apollo Maxx User Manual
Contents
1. General Safety Instruction .................................................................................................1
1.1 Safety Instruction .............................................................................................1
1.2 General precaution...........................................................................................1
1.3 Precaution regarding battery operation ............................................................1
2. Instruction.........................................................................................................................2
2.1 Brief Instruction................................................................................................2
2.1.1 General Description.................................................................................2
2.1.2 Naming Rules..........................................................................................2
2.2 Structure..........................................................................................................3
2.2.1 Front........................................................................................................3
2.2.2 Control panel...........................................................................................4
2.2.3 Connection compartment.........................................................................4
2.2.4 Dimension................................................................................................6
2.3 Function...........................................................................................................7
2.3.1 DC Couple System..................................................................................7
2.3.2 Parallel and Three Phase ........................................................................7
2.3.3 Power Control and Power Assist..............................................................7
2.3.4 System Working Mode.............................................................................8
2.3.5 Built in Load Management.......................................................................8
2.3.6 Powerful and Reliable Inverter.................................................................8
2.3.7 Professional Battery Charger...................................................................8
2.3.8 Transfer................................................................................................. 11
2.3.9 Protect Function ....................................................................................11
2.3.10 Communication....................................................................................12
3. Installation and Wiring.....................................................................................................13
3.1 Recommended DC cables...............................................................................13
4. Configuration ..................................................................................................................14
4.1 Check before Operation...................................................................................14
4.2 Power ON Test.................................................................................................14
4.3 Power OFF......................................................................................................14
5. Operation........................................................................................................................15
5.1 Operation and Display Panel ...........................................................................15
5.2 LCD Display Icons...........................................................................................16
5.3 LCD Setting.....................................................................................................18
6. FAQ ................................................................................................................................26
6.1 Fault code........................................................................................................26
6.1.1 Inverter Fault .........................................................................................26
6.1.2 MPPT Fault............................................................................................27
6.2 Warning code.................................................................................................27
6.2.1 Inverter Warning....................................................................................27
6.2.2 MPPT Warning ......................................................................................29
6.2.3 BMS Warning.........................................................................................29
6.2.4 BGK Warning.........................................................................................30
7. Specification ...................................................................................................................31
Apollo Maxx User Manual
1
1. General Safety Instruction
1.1 Safety Instruction
As the dangerous voltage and the high temperature exist within the Apollo Maxx All in One Solar
Inverter, only the qualified and authorized maintenance personnel is permitted to open and repair
it. Please make sure Apollo Maxx All in One Solar Inverter is turned off before opening and
repairing it.
This manual contains information concerning the installation and operation of the Apollo Maxx All
in One Solar Inverter. All relevant parts of the manual should be read prior to commencing the
installation. Please follow the local stipulation in the meantime.
Any operation against safety requirement or against the design, manufacture, safety standard are
out of the manufacturer warranty.
1.2 General precaution
DO NOT expose the inverter to the dust, rain, snow or liquids of any type, it is designed for
the indoor use. DO NOT block off ventilation, otherwise the Apollo Maxx All in One Solar
Inverter would be overheating.
To avoid the fire and the electric shock, make sure all cables selected with right gauge and
connected well. Smaller diameter and broken cable are not allowed to use.
Please do not put any inflammable goods near to the inverter.
NEVER place the unit directly above batteries, the gases from the battery will corrode and
damage the Apollo Maxx All in One Solar Inverter.
DO NOT place battery over Apollo Maxx All in One Solar Inverter.
1.3 Precaution regarding battery operation
Use plenty of fresh water to clean in case the battery acid touches the skin, the clothing, or
eyes and consult with doctor as soon as possible.
The battery may generate flammable gas during charging. NEVER smoke or allow a spark
or a flame in the vicinity of the battery.
DO NOT put the metal tool on the battery, a spark and a short circuit might lead to a
explosion.
REMOVE all personal metal items such as rings, bracelets, necklaces, and watches while
working with batteries. Batteries can cause short-circuit current high enough to make metal
melt, and could cause severe burns.
Apollo Maxx User Manual
2
2. Instruction
2.1 Brief Instruction
2.1.1 General Description
Apollo Maxx is a new generation of all in one solar inverter designed for various type of off grid
system including DC Couple system and generator hybrid system. It can provide UPS class
switching speed and with capability to support parallel as well as composing three phase system.
Apollo Maxx delivers high reliability, performance and industry leading efficiency for mission
critical application. Its distinguishing surge capability makes it capable to power most demanding
appliances, such as air conditioner, water pump, washing machine, freezer, etc.
With the function of power assist & power control, it can be used to work with a limited AC source
such as generator or limited grid. Apollo Maxx can automatically adjust its charging current
avoiding grid or generator to be overloaded. In case of the temporary peak power appears, it can
work as the supplement source to the generator or the grid.
2.1.2 Naming Rules
Rate capacity
Rate DC voltage
Series name
Apollo Maxx XX Y
figure
explanation
Apollo Maxx
series name
2.0
Represent rate capacity
2000W
3.0
3000W
5.0
5000W
M
Represent rate DC voltage
24VDC
S
48VDC
Naming example : Apollo Maxx 3.0S
Apollo Maxx All in One Solar Inverter
Rate capacity :3000W
Rate DC voltage : 48V
Apollo Maxx User Manual
3
2.2 Structure
2.2.1 Front
Apollo Maxx 2.0M, Apollo Maxx 2.0S, Apollo Maxx 3.0M, Apollo Maxx 3.0S
Apollo Maxx 5.0S
Figure 2-1 Front View of the All in One Solar Inverter Structure
Apollo Maxx User Manual
4
2.2.2 Control panel
ON/OFF button
Operation button
Figure 2-2 All in One Solar Inverter Control Buttons
2.2.3 Connection compartment
Apollo Maxx 2.0M, Apollo Maxx 2.0S, Apollo Maxx 3.0M, Apollo Maxx 3.0S
Apollo Maxx 5.0S
Figure 2-3 Signal Terminals
Apollo Maxx User Manual
5
Table 2-1 Signal Terminals Introduction
No.
Silk-screen
Definition
①
BAT Sample
Battery temperature and voltage sample.
②
Remote
Dry contact input control, remote ON/OFF control.
③
ComMON
RS485 port for external monitor such as MCK, SNMP, Kinergy, etc.
④
ComSync In
Parallel synchronous communication input(CAN) .
⑤
ComSync Out
Parallel synchronous communication output(CAN) .
⑥
EPO
Dry contact input control, emergency power off.
⑦
ComSYS
System communication(RS485), connected to SP or BGK.
⑧
ComSYS
System communication(RS485), connected to SP or BGK.
⑨
Relay1
Dry contact output control 1(NO,C,NC) .
(NO,C,NC)
⑩
Relay2
Dry contact output control 2(NO,C,NC) .
(NO,C,NC)
Apollo Maxx 2.0M, Apollo Maxx 2.0S, Apollo Maxx 3.0M, Apollo Maxx 3.0S
Apollo Maxx User Manual
6
Apollo Maxx 5.0S
Figure 2-4 Power terminal
2.2.4 Dimension
Apollo Maxx 2.0M, Apollo Maxx 2.0S, Apollo Maxx 3.0M, Apollo Maxx 3.0S
Dieses Handbuch passt für folgende Modelle
6
Inhaltsverzeichnis
Andere TBB Wechselrichter Handbücher
