
Long Range Two-Way Remote Control System
Europe: 868 MHz SRD Band
America: 915 MHz ISM Band
Micro TX: Selectable 25mW and 100mW
Standard TX: Selectable 10mW to 500mW, additional 1W and 2W available
with external power connected via XT30 socket
RX: 30mW
TX: 1x omnidirectional dipole antenna - single stage
RX: 2x omnidirectional dipole antennas - diversity, dual independent RF
stages
8-channel traditional PWM (freely mappable ) or up to 12-channel PPM
stream outputs, standard 2.54mm servo connectors
Any radio with PPM stream output ( absolute max. ratings: -0.3V - 15V )
JR Adapter for easy install on JR, FrSky and similar radios
Micro TX: RGB LED light, push button, configuration via CRSF (TBS TANGO,
OpenTX ect. )
Standard TX: 1.3-inch OLED display and joystick for configuration, binding
and link stats, real-time telemetry link to any computer, tablet or phone and
Micro-USB for firmware upgrade and configuration via TBS Agent software
Diversity RX: Beacon-mode, receiver backup LiPo battery - operating time of
approx. 2 days
Pre-set servo positions or stops outputting servo pulse - selectable in
configuration menu or via push button
Standard SMA (not RP-SMA)
Variable depending on output power and radio environment
TX: +3.5 to 12.6V via RC or HT 3-pin input connector, External 2S to 3S LiPo
via XT30 connector (standard RX only)
RX: +4.5V to 8.4V via servo header
All reverse-polarity protected
TX: 1.1W, at 25mW
TX: 3.2W, at 2000mW
Standard RX: 1x BST (the CROSSFIRE RX does not power the BST line), 8x
Servo connectors - Micro RX: V1 1x Servo, 1x BST, V2 4x Servo, 1x BST
Standard TX: 150 x 80 x 20 mm, Micro TX: 73 x 56 x 35 mm
Diversity RX: 30 x 50 x 12 mm, Micro RX: 40 x 14 x 9.5mm
Micro TX: 38 grams
Standard TX: 340 grams
Diversity RX: 25 grams, Micro RX: 3.2 grams
1x TBS CROSSFIRE TX transceiver unit, 1x TBS CROSSFIRE RX transceiver unit,
1x JR-adapter module, 1x Futaba-cable, 1x JR-cable, 1x custom-cable, 1x XT30
cable, 1x Transmitter SMA antenna, 2x Receiver SMA antenna