TC Electronic DITTO LOOPER Bedienungsanleitung

DITTO LOOPER

User Manual

Working with loops 7

Recording your first loop 7

Setting loop playback volume 7

Overdubbing 7

Undo (deleting the last take) 7

Redo (restoring a previously deleted take) 7

Using Undo/Redo creatively 8

Stopping loop playback/recording 8

Deleting the loop 8

Storing the loop 8

Setup examples 9

True Bypass and Analog Dry-through 9

FAQ 10

Table of contents

Introduction 1

Important safety instructions 2

EMC/EMI 3

Unpacking and setting up 4

Ditto Looper in 30 seconds 5

Operation 5

Technical Specifications 5

Input, output, controls 6

Power input 6

Audio input 6

Audio output 6

Footswitch 6

Loop Level knob 6

USB connector 6

Introduction

“It seems that perfection is attained

not when there is nothing more to add,

but when there is nothing more to remove.”

Antoine de Saint-Exupéry, Terre des Hommes (1939)

Congratulations on your purchase of

TC Electronic’s amazing Ditto Looper!

What puts Ditto Looper miles ahead of the looper pack is its

minimalist, no-nonsense approach to looping. This is not a product

that tries to cater to singers, drummers, DJs or experimental Jazz

xylophone players.* TC Electronic designed Ditto Looper with

guitar and bass players in mind.

The result? A looper that is 100% intuitive and takes up virtually

no space on a pedal board.

* Of course, everyone (including experimental Jazz xylophone play-

ers…) is more than welcome to use Ditto Looper! If quality and

simplicity is your thing, you will enjoy this product.

About this manual

This manual will provide you with a quick overview of how to get

rocking fast as well as an in-depth look at the pedal’s more ad-

vanced features. Happy reading!

Please note: TC Electronic reserves the rights to change the con-

tents of this manual at any time.

The latest revision of this manual can be downloaded from

http://www.tcelectronic.com/manuals.asp

This is version 1.0 of the Ditto Looper manual.

If you still have questions about the product after reading this

manual, please get in touch with TCElectronic Support:

http://www.tcelectronic.com/support

Important safety instructions

– Read these instructions.

– Keep these instructions.

– Heed all warnings.

– Follow all instructions.

– Do not use this apparatus near water.

– Clean only with dry cloth.

– Do not block any ventilation openings.

– Install in accordance with the manufacturer’s instructions.

– Do not install near heat sources such as radiators, heat reg-

isters, stoves, or other apparatus (including amplifiers) that

produce heat.

– Only use attachments/accessories specified by the manufac-

turer.

– Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way,

such as power supply cord or plug is damaged, liquid has been

spilled or objects have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does not operate nor-

mally, or has been dropped.

Warning

To reduce the risk of fire or electrical shock, do not expose this

equipment to dripping or splashing and ensure that no objects

filled with liquids, such as vases, are placed on or near the equip-

ment.

Do not install this product in a confined space.

Service

All service must be performed by qualified personnel.

Caution

You are cautioned that any change or modifications not expressly

approved in this manual could void your authority to operate this

equipment.

EMC / EMI

Electromagnetic compatibility (EMC)

Electromagnetic interference (EMI)

This equipment has been tested and found to comply with the

limits for a Class B Digital device, pursuant to part 15 of the FCC

rules.

These limits are designed to provide reasonable protection against

harmful interference in residential installations. This equipment

generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular instal-

lation. If this equipment does cause harmful interference to radio

or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician for

help.

For customers in Canada

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme

NMB-003 du Canada.

Unpacking and setting up

Set…

Connect a 9V power supply with the following symbol to the DC

input socket of Ditto Looper:

Ditto Looper does not come with a power supply.

– Plug the power supply into a power outlet.

Please note that Ditto Looper has no battery compartment, and you

cannot connect a USB power supply to the USB port. A conventional

power supply is required for operating this product.

– Connect your instrument to the INPUT jack on the right side

of the pedal using a ¼” cable.

– Connect the OUTPUT jack on the left side of the pedal to

your amplifier.

Play!

Unpacking and setting up

Ready…

The Ditto Looper box should contain the following items:

– 1 Ditto Looper pedal

– 1 Ditto Looper quick guide

– 2 rubber feet for “non-velcro” pedal board mounting

– 1 TC Electronic sticker

– 1 leaflet about TC’s guitar FX product range.

Inspect all items for signs of transit damage. In the un-

likely event of transit damage, inform the carrier and

supplier.

If damage has occurred, keep all packaging as it can be used as

evidence of excessive handling force.

Ditto Looper in 30 seconds

Technical Specifications

Maximum loop length 5 minutes

Maximum no. of overdubs Unlimited

Bypass mode True Bypass

Latency None (analog dry-through)

Dimensions

(Width x Depth x Height)

48 x 48 x 93 mm /

1.9 x 1.9 x 3.7”

Input Connector Type Standard ¼” jack – mono/TS

Output Connector Type Standard ¼” jack – mono/TS

Power Input Standard 9 V DC,

centre negative (not supplied)

USB Connector Type Mini-B USB

Controls Loop Level knob

(Loop playback volume)

Switch

(Loop playback control)

Ditto Looper in 30 seconds

If you are in a hurry, chances are you’ll find what you’re looking

for on this page.

Operation

Power up Ditto Looper Connect a power supply.

Record Tap footswitch once.

Switch to playback Tap footswitch again.

Undo/Redo last recording Press and hold footswitch.

Stop Double-tap footswitch.

Stop and delete the loop Double-tap and hold footswitch.

Resume playback Tap footswitch again.

Delete the loop Press and hold footswitch

(when Ditto Looper is disengaged).

Input, output, controls

2 – Audio input

This is a standard ¼” input jack (mono/TS).

Connect your guitar here using a regular ¼” mono cable.

For other setups, see the “Setup examples” section of this manual.

3 – Audio output

This is a standard ¼” output jack (mono/TS).

Connect this jack to your amplifier using a regular ¼” mono cable.

For other setups, see the “Setup examples” section of this manual.

4 – Footswitch

Use this footswitch to control all loop-related functions of the

pedal (record, playback, undo/redo, delete). See the following sec-

tion of this manual (“Working with loops”).

5 – Loop Level knob

Use this knob to control the level of your loops.

(You didn’t see this one coming, did you?)

6 – USB connector

This is a USB Mini-B type socket. It can be used to transfer soft-

ware updates to this product from a computer.

Input, output, controls

6 1

1 – Power input

This is a standard 5.5/2.1 mm DC plug (centre = negative). To

power up Ditto Looper, connect a power supply to its power

input socket. Ditto Looper requires a 9 V power supply providing

100 mA or more (not supplied).

To minimize hum, use a power supply with isolated outputs.

Working with loops: Recording / Overdubbing / Undo & Redo

Overdubbing

When you’re happy with your loop, you can start overdubbing.

– To record another take (overdub), press the footswitch again

while the original loop is playing back. The LED will turn red,

indicating you’re in Record mode again.

– When you’re done, press the footswitch once more to quit

Record mode.

Ditto Looper will repeat the loop with both the original recording

and the overdub.

Please note that the length of the loop will never increase when

overdubbing. When you continue playing, you will simply create

additional overdubs. You can record as many overdubs as you like

– there is no limit.

Undo (deleting the last take)

– To undo (delete) the last take you recorded, simply press and

hold the footswitch for 1.5 seconds or longer.

The LED will blink twice in rapid succession, and the last take

will be deleted.

Redo (restoring a previously deleted take)

– If you have deleted the last take and you changed your mind,

you can restore that take. To do so, simply press and hold the

footswitch for 1.5 seconds or longer.

The LED will blink twice in rapid succession, and the previously

deleted take will be restored.

Working with loops

Recording your first loop

– To start recording, press the footswitch once.

The LED will light up in red, indicating Ditto Looper is in Re-

cord Mode.

– At the end of the loop (eg after eight bars), press the foot-

switch again.

The LED will turn green, and Ditto Looper will repeat the

loop continuously. The LED will blink every time Ditto Looper

reaches the starting point of the loop.

Your loop can be up to five minutes long!

Setting loop playback volume

– To change the playback volume of the loop you just recorded,

adjust the knob labelled “Loop Level”.

The Loop Level knob only controls loop playback level – it has

no influence on the signal from your instrument.

Working with loops: Undo & Redo / Stopping / Deleting loops

Stopping loop playback/recording

and deleting the loop

– To stop loop playback/recording and delete everything you

have recorded, press the footswitch twice in short succession

and hold down your foot on the second tap.

The LED will turn off to indicate that the loop has been de-

leted. At this point, you can start recording loops from scratch

again.

Deleting the loop when you are

not recording or playing back

– To delete everything you have recorded, press the footswitch

twice in short succession and hold down your foot on the

second tap.

The LED will turn off to indicate that the loop has been de-

leted.

When you delete your loop from Ditto Looper, the device

goes into True Bypass mode.

Storing the current loop

When you power down Ditto Looper and a loop is in memory,

it will be stored automatically. When you power up Ditto Looper

again, the LED will flash in green, indicating your previously re-

corded loop is available. Just hit the footswitch, and playback will

start. If you want to start from scratch, delete the loop as de-

scribed in the previous paragraph.

Using Undo/Redo creatively

Undoing and redoing overdubs can be used for more than just

correcting mistakes. You can make your performance more in-

teresting by removing and bringing back sections. Here is a simple

example:

– Record a bass line (loop cycle 1).

– Record some chords (loop cycle 2).

– Record a melody (loop cycle 3).

– Press and hold the footswitch to remove the melody. Impro-

vise or record something else.

– Press and hold the footswitch again to bring back the previ-

ously recorded melody.

Please note that undoing or redoing by using the footswitch is only

possible during playback. Holding down the footswitch after stop-

ping loop playback/recording will delete the loop!

Stopping loop playback/recording

– To stop loop playback or recording, press the footswitch twice

in short succession.

The LED will start flashing in green to indicate that your loop

is still in memory and ready for playback.

Andere Handbücher für DITTO LOOPER

Inhaltsverzeichnis

Andere TC Electronic Musikpedal Handbücher

TC Electronic

TC Electronic DITTO LOOPER Bedienungsanleitung

TC Electronic

TC Electronic BUCKET BRIGADE Bedienungsanleitung

TC Electronic

TC Electronic CORONA CHORUS Bedienungsanleitung

TC Electronic

TC Electronic Ditto Bedienungsanleitung

TC Electronic

TC Electronic REVERB HALLOE FAME Bedienungsanleitung

TC Electronic

TC Electronic HALL OF FAME 2 REVERB Bedienungsanleitung

TC Electronic

TC Electronic CORONA CHORUS Bedienungsanleitung

TC Electronic

TC Electronic MIMIQ MINI DOUBLER Bedienungsanleitung

TC Electronic

TC Electronic NETHER OCTAVER Bedienungsanleitung

TC Electronic

TC Electronic 3RD DIMENSION CHORUS Bedienungsanleitung

TC Electronic

TC Electronic Hall of Fame Mini Reverb Bedienungsanleitung

TC Electronic

TC Electronic AFTERGLOW CHORUS Bedienungsanleitung

TC Electronic

TC Electronic Vintage Pedals Bedienungsanleitung

TC Electronic

TC Electronic The Dreamscope Bedienungsanleitung

TC Electronic

TC Electronic DITTO X2 LOOPER Kurzanleitung

TC Electronic

TC Electronic PolyTune Mini Bedienungsanleitung

TC Electronic

TC Electronic Vintage DISTORTION Bedienungsanleitung

TC Electronic

TC Electronic NETHER OCTAVER Bedienungsanleitung

TC Electronic

TC Electronic Stereo Chorus/Flanger & Pitch Modulator Bedienungsanleitung

TC Electronic

TC Electronic FLASHBACK 2 DELAY AND LOOPER Bedienungsanleitung

TC Electronic

TC Electronic DITTO LOOPER Bedienungsanleitung

TC Electronic

TC Electronic FLASHBACK Bedienungsanleitung

TC Electronic

TC Electronic VORTEX FLANGER Bedienungsanleitung

TC Electronic

TC Electronic TUBE PILOT OVERDRIVE Bedienungsanleitung

Beliebte Musikpedal Handbücher anderer Marken

Behringer

Behringer ULTRA WAH UW300 Bedienungsanleitung

Whirlwind

Whirlwind oc-bass Bedienungsanleitung

Strymon

Strymon Lex-rotary Bedienungsanleitung

Behringer

Behringer PB600 Bedienungsanleitung

Lexicon

Lexicon MX200 Bedienungsanleitung

Dunlop

Dunlop Hendrix 68 Shrine Octavio Fuzz Series Bedienungsanleitung

Matthews Effects

Matthews Effects Whaler V2 Bedienungsanleitung

Grid 1

Grid 1 Pedal Jeanie Bedienungsanleitung

Amptweaker

Amptweaker tightboost Bedienungsanleitung

Ibanez

Ibanez TS-808 Tube Screamer Overdrive Pro Bedienungsanleitung

PuzzleSounds

PuzzleSounds DR. Q ENVELOPE FILTER Bedienungsanleitung

BYOC

BYOC Analog Chorus Handbuch

Dimavery

Dimavery EPVP-50 Bedienungsanleitung

Tefi Vintage Lab

Tefi Vintage Lab GEGÈ Bedienungsanleitung

Pro-MIDI

Pro-MIDI G25 Bedienungsanleitung

DW 7000 Bedienungsanleitung

FAMC

FAMC Liquid-Foot Jr. Series Bedienungsanleitung

Dimavery

Dimavery EPOD-50 Overdrive Bedienungsanleitung