TE Connectivity HTP600 Fehlerbehebungshandbuch

HTP600 Quick Startup Guide

Notice:

•Turn The HTP600 Off

•The printer must not be connected to the PC.

•Unplug the USB cable from the printer

Driver Installation

•Select the sub-folder \HTP600-Printer

Drivers

•Execute Setup Program

For Windows® 7, 8, 10 (32 and 64 bit)

1/4

•Press “Install this Driver software anyway”

After a few seconds a “new hardware

found” message appears.

The P-PRINTER is detected and added.

•Select “Devices”

•Select

The “P-PRINTER” appears:

•Check the Printer is Turned off or disconnected

•Press Install to Continue

The installation proceeds, it can take a few

minutes.

Notice:

For Automatic Plug and Play HTP600 Printer

•Restart the PC

•Insert Strong-Black ribbon

•Plug the USB cable on the computer

•Turn HTP600 On

•Wait until HTP600 must be ON LINE

•A Restart of the PC is requested.

Step 1: Driver Installation

•Select English

•Press Install

•From Start

•Select “Settings”

Step 2: Automatic Creation of

7 Printer Devices in Windows

•Execute PPRCOPY.exe

•Press Ok to proceed

•Select the sub-folder \HTP600-Printer Drivers

•Select the sub-folder \ENG

•Select the sub folder \HTP600 COPY DRIVER ENG

•Execute program \PPRCOPY.exe

•Press Ok to Complete the Printers Installation

Notice:

•The HTP600 Installation requires the creation of

7 different Printer Devices.

•The creation process is Automatic

Printer HTP600 Quick Startup Guide 200707-English

Download Printer Driver and

Software on Te Server

Notice:

•Turn The HTP600 Printer On

•Wait until HTP600 printer is ON LINE

•Select the sub-folder \HTS Software Setup

•Select the sub-folder \HTS-Setup-ENG

The installation proceeds, it can take a few

minutes.

Step 3: HTS Software

Installation

•Double-Click to execute HTSsetup-ENG.exe

Program

•Press Next to proceed.

•Press Install to proceed.

•Press Finish to complete the Setup

The HTS Software is installed in the

default folder c:\TE\HTS

The HTS icon appears

For Windows® 7, 8, 10 (32 and 64 bit)

HTP600 Quick Startup Guide

Notice:

•The program Setup of HTS loads automatically

the 7 HTP600 Printer Devices with all the

correct Driver Setting parameters.

Step 4: Load Printer Profiles

in HTS

To reload the correct settings.

•Run HTS.

•Select Menu File

•Select Menu Printer Setup.

The List of the 7 HTP600 Printer Devices appears.

Notice:

Following Instructions are for reloading and setting

Printer Profiles in HTS in case of:

•Verification of Printer Settings

•No communication between Pc and Printer

•Re-installation of HTP600 Printer Drivers

Notice:

•Repeat the Complete Cycle for all the 7 Printer

Devices

2/4

Printer HTP600 Quick Startup Guide 200707-English

Notice:

•Repeat the Complete Cycle for all the 7 Printer

Devices

•Retrieve each «Pre-Defined Profile» for each

HTP600 Printer Device

•The Printer Device and the Printer Profile have

the same Name

HTP600 Quick Startup Guide

•Select ENTRELEC TERMINAL BLOCKS

•Press Properties

•Select the Folder Profiles

•Select the Profile “ENTRELEC T-BLOCKS”

•Select Retrieve

Notice: Sample below is for

«ENTRELEC TERMINAL BLOCKS» Printer device

3/4

Repeat the Operation for all the 7 printer Devices

•Press Yes to continue

Step 5: Printer centering

Notice:

•The centering Operation allows End-User to make

some adjustments to the print start position in

order to make corrections on printing centering

•The coordinates (X, Y) can be modified for move

the starting point on the right, left, to the top.

•In this manual the directions Right, Left, Top,

Bottom refer to HTS Software Preview Window:

To the bottom

To the left

To the top

To the right

Sample refers to Terminal Block tags

RC510TT and the Printer Device “ENTRELEC

TERMINAL BLOCKS”

•Run HTS

•Select “File” >“Printer Setup”

•Select the Centering Button

Printer HTP600 Quick Startup Guide 200707-English

•To move the print starting position:

Printing

Directions

Mm with two decimal digits

Corrections

To the Top Type in a positive value for the Y axis

To the Bottom Type in a negative value for the Y axis

To the Right Type in a positive value for the X axis

To the Left Type in a negative value for the X axis

HTP600 Quick Startup Guide

4/4

Troubleshooting

Event Possible cause What to do

Printer does not react Printer is not On Line Check Power supply is On

Check On Line Led is On

Printer is turned on but does

not react

PC connection faulty

Check the PC <

> printer connection

Printer is turned on but does

not react

PC –Printer communication

faulty

Reload printer profile

Event Possible cause What to do

The Cover is

Open Error 02

Printer's frontal cover not

correctly closed

Open the cover and close it carefully, until the

end

No Ribbon

Ribbon cartridge empty or not

positioned correctly

Check the ribbon cartridge, if empty substitute, if

cut repair

Set Ribbon

Ribbon cartridge not correctly

positioned

Open the cover, remove and insert again the

cartridge, until it is not correctly positioned

No Clening tape Cleaning tape not present or

empty

Check the cleaning cassette, if needed substitute

Set a new

media

No Media in the printer Insert a new media

Remove media

and set it again

Media not correctly feeded

into the printer

Remove the media, when you read "set a new

media", insert it again until you hear the "bip"

Media feed

Error

Media jam Remove all the media, press Cancel, when

displayed "set a new media", insert media again

until you hear the "bip"

Check feeder

Type

Wrong support plate Substitute the support plate with the right one

for the media you are printing.

Check Media

and Press enter

No media on the support

plate / feeder empty

Fill the right media in the feeder, then press

Enter

Event Possible cause What to do

Media printed

correctly, but

not aligned

Guides not

correctly

positioned to

guide the media

Check the guides, if

necessary set the

guides closer to the

side of the

media/support plate

Media printed

very faint

Non correct

driver's setting

Reload the printer

profile

Media printed

very smudged

Non correct

driver's setting

Reload the printer

profile

Media printed

with some

punctual

defects

Surface of the

media is dirty

Check that the

surface of the media

is not dirty, if

necessary clean with

alcohol

Media printed

with punctual

defects

Cleaning

roller

dirty

Run the cleaning

function (Online-

>Menu-->Cleaning)

Faq Printer Quality

Error Messages on Lcd Printer Panel

Windows® is a registered trademark of Microsoft Corporation in the United States and other countries.

•Check option Thermal Transfer printer is checked

Printer HTP600 Quick Startup Guide 200707-English

Andere TE Connectivity Drucker Handbücher

TE Connectivity

TE Connectivity T6112DS Handbuch

TE Connectivity

TE Connectivity T2212 Bedienungsanleitung

TE Connectivity

TE Connectivity T3212 Bedienungsanleitung

TE Connectivity

TE Connectivity T3200 Leitfaden

TE Connectivity

TE Connectivity T3212 Bedienungsanleitung

TE Connectivity

TE Connectivity T6112DS Bedienungsanleitung

TE Connectivity

TE Connectivity T2212 Bedienungsanleitung

TE Connectivity

TE Connectivity T3212 Bedienungsanleitung

TE Connectivity

TE Connectivity BTT-02 Bedienungsanleitung

TE Connectivity

TE Connectivity T2212 Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Xerox

Xerox DocuColor 5000 Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Epson

Epson ET-7750 Betriebsanleitung