Teac PLMSDM1060 Bedienungsanleitung

WARRANTY REGISTRATION

Please read this warranty card.

Keep your purchase receipt to enable you to proceed quickly in the event of a Warranty Service.

Warranty Terms & Conditions

1. TEAC warrants to the original retail purchaser only, that this product is free from defects in material and

workmanship under normal domestic use and authorises free service during the warranty period at any TEAC

Authorised Centre only. TEAC warranty only applies to products purchased, used and serviced in Australia.

2. Subject to the terms herein, this warranty effectively covers the equipment as specified in the Warranty Periods

Table from the date of purchase.

3. All parts, except the external cabinet, are warranted as specified in Warranty Periods Table, and will be repaired or

replaced at the sole judgement of TEAC.

4. Normal customer maintenance as described in the owner’s manual is not covered by this warranty (such as cleaning

VCR heads etc.)

5. This warranty does not apply to equipment showing abuse, damage or that it may have been tampered with, altered

or repaired outside any TEAC Authorised Service Centre. If so, the warranty will be void.

*Your nearest Authorised TEAC Service Centre is listed in your Owners Manual

6. In the event that this unit or any defective parts must be returned to TEAC Service Centres, a copy of this warranty

certificate and of your purchase receipt must be enclosed to be a valid warranty. Such equipment or parts must be

sent freight prepaid to the nearest authorised TEAC Service Centre. After the repair, the unit will be available for

collection by the owner or it will be returned to the owner. The warranty does not cover freight or insurance. In all

cases of in-transit damages or loss, a claim must be filed against the carrier by the purchaser.

7. In home service will only be provided as part of this warranty if all the following conditions are met;

a) The product is a Colour Television of 51cm screen size or over.

b) The product is within the warranty period.

c) The product is located within the normal service area of the local TEAC Service Provider.

In any other situation or circumstance, where an in home service call is made, a service fee will be charged by the

Service Provider.

8. TEAC Total Care in home service and installation is available at competitive rates.

9. No one is authorised to assume any liability on behalf of TEAC or impose any obligation on it, in connection with

the sale of any equipment other than as stated in this warranty and outlined above.

10. In no event will TEAC be responsible or liable for indirect or consequential damages from interrupted operations or

other causes.

11. Warranty is not transferable to any subsequent purchaser if the product is sold during the warranty period,

TEAC PRODUCT

WARRANTY PERIOD

Televisions / Plasma 106 cm and

above 1 Year (In-Home Service Included)

LCD televisions 56cm and above 1 Year (In-Home Service Included)

Televisions – 51cm and above 1 Year (In-Home Service Included)

Televisions under 51 cm 1 Year (No In-Home Service)

Digital Set Top Boxes 1 Year (No In-Home Service)

VCR 1 Year (No In-Home Service)

DVD 1 Year (No In-Home Service)

DVD Recorder 1 Year (No In-Home Service)

Audio Systems 1 Year (No In-Home Service)

WARRANTY PROCEDURES

Please keep this information for your own records.

Please refer to the owner’s manual to ensure that you have followed the correct installation and operating procedures.

1. Read owner’s manual carefully

2. If you require Warranty Service, please contact the TEAC Service Centre

3. Please have your purchase receipt as your proof of purchase and the following details completed for a valid

Warranty.

Owner’s Name

Owner’s Address

Postcode

Model Name/No. Serial No.

Dealer’s Name

Dealer’s Address

Postcode

4. Please ensure that your product is packed appropriately upon return to the service centre.

If you have any other queries regarding service or warranty please contact the TEAC Service below:

TEAC Total Care Ph: 1800 656 700

[email protected]

www.teac.com.au

IMPORTANT SAFETY INSTRUCTIONS

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: To reduce the risk of electric shock, do not remove the front or back covers.

No user-serviceable parts inside. Refer servicing to qualified service personnel only.

The lightning flash with arrow-head

within a triangle is intended to inform

the user that parts inside the product

are a risk of electric shock.

The exclamation point within a triangle

is intended to tell the user that important

operating and servicing instructions are

explained.

WARNINGS & PRECAUTIONS

!To prevent damage which may result in fire or shock hazard, do not expose this product to rain or

moisture.

!To prevent electric shock, do not remove cover. No user serviceable parts are inside. Refer servicing to

qualified service personnel only.

!Keep display away from excessive dust, high temperatures, moisture or direct sunlight.

!Use in a well-ventilated area and do not cover ventilation openings.

!Unauthorized modification this equipment or usage of an unshielded connecting cable may cause

excessiveinterference.

!When the display is not in use for a long period of time, disconnect it from the electric outlet.

!If the picture displayed is in any way abnormal, turn off the unit and disconnect it from the electric

outlet. Verify your signal wire connections and reconnect the display to the electric outlet.

!Disconnect from the electric outlet before cleaning. Do not use liquid or aerosol cleaners. Use only a

slightly damp cloth for cleaning.

!Do not place this product on an unstable cart, stand or table. The product may fall, causing serious

damage.

!Do not place the unit on a bed, sofa, rug, or other similar surfaces. Never place the unit near or over a

radiator or heat source. Do not install unit in an enclosed area unless proper ventilation is provided.

!The unit should be operated from the type of power source indicated on the label. If the type of available

power is unknown, consult your dealer or local power company.

!The unit is equipped with a 3-pin grounded plug. The plug will only fit into a grounded power outlet. This

is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician. Do not

alter the plug; this will defeat the safety feature.

!Do not rest objects on the power cord & avoid placing power cord near high traffic areas.

!Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

!Disconnect the unit from the main supply and refer servicing to qualified service personnel under the

following conditions:

•Power cord or plug is damaged or frayed.

•Liquid has been spilled into the product.

•Unit has been exposed to water or moisture.

•Unit does not operate normally when the operating instructions are followed. Adjust only those

controls that are covered by the operating instructions, improper adjustment of other controls may

result in damage which often requires extensive work by a qualified technician to restore the unit to

normaloperation.

•Unit has been dropped or the cabinet has been damaged.

•Unit exhibits a distinct change in performance, indicating a need for service.

TABLE OF CONTENTS

IMPORTANTSAFETYINSTRUCTIONS ............................................................................................ 1

TABLE OF CONTENTS .................................................................................................................... 2

FCCSTATEMENT ............................................................................................................................ 3

CLEANINGANDMAINTENANCE .................................................................................................... 4

PRODUCTFEATURES .................................................................................................................... 5

PACKAGECONTENTS.................................................................................................................... 6

UNDERSTANDINGYOURDISPLAY

Front View........................................................................................................................... 7

RearView ........................................................................................................................... 7

Full Function Remote Control .............................................................................................. 8

CONNECTINGTHEDISPLAY

Connecting a DVD Player.................................................................................................... 9

Connecting a HDTV Decoder Set-Top Box........................................................................... 10

Connecting a VCR............................................................................................................... 11

External Audio Connections ................................................................................................ 11

Connecting a PC ................................................................................................................. 12

RS-232 Remote Control Connections .................................................................................. 13

USING THE DISPLAY - BASICS

PoweringON/OFF ............................................................................................................... 14

Selecting Signal Source ...................................................................................................... 14

Adjusting Sound Volume ..................................................................................................... 15

USINGWITHHDTV

UnderstandingHDTV ........................................................................................................... 16

ADVANCEDFUNCTIONS

Picture-In-Picture (PIP) / Side-by-Side Picture (POP).......................................................... 18

Widescreen (16:9 Aspect Ratio) Viewing Modes ................................................................. 20

On-Screen Display (OSD) Settings ..................................................................................... 21

Sleep Timer Settings ........................................................................................................... 22

Variable and Fixed Audio Output ......................................................................................... 23

Sound Adjustments............................................................................................................. 23

SRSSurround ........................................................................................................ 23

BBE Sound ............................................................................................................ 23

InnerSpeaker ON/OFF ........................................................................................... 24

Bass Extension...................................................................................................... 24

Signal Frequency Information Display.................................................................................. 25

ADJUSTINGPICTURE

For AV / Component Video.................................................................................................. 26

For RGB / DVI..................................................................................................................... 27

TROUBLESHOOTING ...................................................................................................................... 28

SPECIFICATIONS ............................................................................................................................ 29

WALLMOUNT(OPTIONAL)INSTALLATION .................................................................................... 35

SERVICECONTACTINFO ............................................................................................................... 36

FCC STATEMENT

FCC Compliance Statement

The equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

part 15 of FCC rules. These limits are designed to provide reasonable protection against harmful interfer-

ence when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

strict accordance with the instruction manual, may cause harmful interference to radio communications.

There is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning the equip-

ment off and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and the receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the

user will be required to correct the interference at the user’s own expense.

Shielded interconnected cables and shield power cords must be employed with this equipment to insure

compliance with the pertinent RF emission limits governing this device.

Changes or modifications not expressly approved by the manufacturer could void the user's authority to

operate the equipment and invalidate the warranty.

Canadian Compliance Statement

This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment

Regulations.

Cet appareil numérique de la Classe B respecte toutes les exigences du Règlement sur le matériel

brouilleurdu Canada.

CLEANING AND MAINTENANCE

Cautions When Using the Plasma Display

!Do not bring your hands, face or objects close to the ventilation holes of the plasma

display. Top of plasma display is usually very hot due to the high temperature of exhaust

air being released through the ventilation holes. Burns or personal injuries may ocurr if

any body parts are brought too close. Placing any object near the top of the display

could also result in heat related damages to the object as well as the display itself.

!Be sure to disconnect all cables before moving the plasma display. Moving the display with its cables

attached may damage the cables and thus case fire or electric shock danger.

!Disconnect the power plug from the wall outlet as a safety precaution before carrying out any type of

cleaning or maintenance procedure.

Front Panel Cleaning Instructions

!The front of the display has been specially treated. Wipe the surface gently using only a cleaning cloth

or a soft, lint-free cloth.

!If the surface is particular dirty, soak a soft, lint-free cloth in a mild detergent solution. Wring the cloth

to remove excess liquid. Wipe the surface of the display to remove dirt. Then use a dry cloth of the

same type to dry.

!Do not scratch or hit the surface of the panel with fingers or hard objects of any kind.

!Do not use volatile substances such as insect sprays, solvents and thinners.

Cabinet Cleaning Instructions

!If the cabinet becomes dirty, wipe the cabinet with a soft, dry cloth.

!If the cabinet is extremely dirty, soak a lint-free cloth in a mild detergent solution. Wring

the cloth to remove as much moisture possible. Wipe the cabinet. Use another dry cloth

to wipe over until the surface is dry.

!Do not allow any water or detergent to come into contact with the surface of the display.

If water or moisture gets inside the unit, operating problems, electrical and shock hazards may result.

!Do not scratch or hit the cabinet with fingers or hard objects of any kind.

!Do not use volatile substances such as insect sprays, solvents and thinners on the cabinet.

!Do not place anything made from rubber or PVC near the cabinet for any extended periods of time.

Avoid Still Images

!Do not allow a still picture to be displayed for extended periods of time. This can cause a

permanent image to remain on the plasma display. Examples of still images may

include: still computer images, still video game images, still logos or pictures, text and

images displayed in 4:3 Normal mode.

Contents of this manual is subject to change without notice.

Trademark Credits

!VGA is a trademark of IBM Corporation.

!Macintosh is a registered trademark of Apple Computer Corporation.

!SVGA is a registered trademark of the Video Electronics Standard Association.

!BBE is a registered trademark of BBE Sound Inc.

!SRS and (o) symbol are trademarks of SRS Labs Inc.

SRS technology is incorporated under license from SRS Labs, Inc.

!All other trademarks are the properties of theri respective owners.

PRODUCT FEATURES

!Quiet Fanless Operation

This plasma display is built without any fans for

quiet operations suitable for home theater

related applications.

!Advanced Digital Image Processing

Advanced digital processor with adaptive motion

de-interlacing converts all 15 kHz signals into

progressive scan for a brighter, flicker free

image.

!3:2 Pull-Down for Film Scan Conversion

Built-in 3:2 pull-down processing can automati-

cally detect and convert film content to prop-

erly display with minimal motion artifacts.

!3D Comb Filter

Built-in 3D comb filter coverts analog signal into

a digital signal for more accurate processing,

eliminating cross-color interference for superior

NTSCvideoperformance.

!Dual HD Component Video Inputs

Two high-definition component video inputs with

auto-detection capabilities will automatically

synchronize the display to match the incoming

signal source without manual intervention.

!Picture-in-Picture (PIP)

Watch two programs simultaneously using the

display’s picture-in-picture with four selectable

window position settings.

!Side-by-Side Picture (POP)

Watch two programs silmultaneous by splitting

the screen in half.

!HDTV Signal Compatible

This display is capable of accepting 1080i and

720p HDTV signals via an external HDTV

decoder with RGB or Component Video outputs.

!Digital Zoom Modes

Digital zoom modes gets rid of black bars

common to non-16:9 aspect ratio movie content.

!BBE® Sound Maximizer

Built-in BBE sound processor maximizes the

sound quality.

!SRS® Sound Processing

Built-in SRS sound processor simulates sur-

round effects with only two speakers.

!Selectable Fixed/Variable Audio Outputs

Software selectable fixed or variable audio

outputs ensures flexible audio application

installations.

!Built-in Internal Amplification & Speakers

This display contains an internal 10-watt (5

watts x2) audio amplifier and built-in speakers

sufficient for multimedia applications.

!DVI Digital Video Interface

This display is equipped with a built-in Digital

Visual Interface for direct “digital-to-digital” video

connectivity with PC’s equipped with a DVI

video display adaptor. The DVI interface

eliminates the need for digital-to analog

conversion that usually results in signal

degradation.

!1280x1024 SXGA Support

The onboard digital scaling engine can accept

various PC and HDTV signals and digitally map

the signals to fit within 852x480 pixels. Com-

patible signals include PC resolutions up to

1280x1024 and HDTV signals including 720p

and 1080i.

!Discrete Power ON/OFF

Separate Power ON/OFF buttons on the remote

control facilitates the recording of IR macros

with advanced system setups.

!Direct Input Selection Keys

Separate input selection keys on the remote

control allows quick and easy selection of

variousinputs.

!Bass Extension Circuitry / Subwoofer Out

Enhance bass performance by adding a sepa-

rate powered subwoofer to the display’s

subwooferoutput.

!RS-232 Serial Connection

The RS-232 command set includes front panel

lock, input selectoin, power on/off, volume and

other standard RS-232 command controls.

PACKAGE CONTENTS

Supplied Accessories

Please verify that you received the following items with your package content:

Plasma Display Remote Control User Manual

Power Cable VGA Cable Batteries

Optional Accessories

The following accessories are available and may be

purchased from your local sales representative:

!Wall Mount

!Composite Video Cable (RCA)

!S-Video Cable (Mini-Din)

!Component Video Cable (RCA to RCA)

!Audio Cable (RCA Cable)

Quick Reference Guide

UNDERSTANDING YOUR DISPLAY

Front View

Rear View

Video Connectors (without TV Tuner)

Power (Standby) Button

Turns power on/off from standby mode. There is a 3-

second wait between on/off cycles.

StatusLED

!Not Illuminated - No AC Power detected

If the main power switch (rear of panel) is turned

off, this LED will not illuminate.

!Solid Yellow - Standby (Power OFF) with AC

power detected

The LED will illuminate in yellow color if the

display is shut-off but the main power cord is

plugged into the back of the unit.

!Solid Green - Power ON

Input Button

Use this button to switch between available inputs.

Menu +/- Buttons

Use this menu to engage the On Screen Display

menu.

Volume Adjustment +/- Buttons

Use these buttons to adjust volume up and down.

These keys also serve as adjustment keys when On

Screen Display is engaged.

RGB / Computer Related Connectors

Inhaltsverzeichnis

Andere Teac Monitor Handbücher

Teac

Teac CMH1575 Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung