TECALEMIT Wonderbox Bedienungsanleitung
WONDERBOX TO HD MANAGER
QUICK GUIDE
GO WITH THE FLOW.
www.tecalemitusa.com I support@tecalemitusa.com Tel +1-281-446-7300 I Fax 281-619-5613
CONNECTING WIFI WONDERBOX TO HD MANAGER
1. Download the HD Manager software from the USB provided with your Wonderbox.
2. Open the HD Manager and go to the Settings Tab
3. Click Settings in the green bar
4. Click the WLAN tab
5. Check the box that reads “Activate UDP”
6. Then check the HDA-(W)LAN button.
7. Click next to WLAN.
8. Check the box next to Dynamic Host Configuration Protocol (DHCP) if you do not have a
static IP address (most common). If you have a static IP address leave this option unchecked
and fill in the IP Address, Subnet Mask, Gateway IP Address.
9. Enter in your network name (is case sensitive) into the WLAN SSID field
10. Enter in the password to your WIFI under Show Password
GO WITH THE FLOW.
www.tecalemitusa.com I support@tecalemitusa.com Tel +1-281-446-7300 I Fax 281-619-5613
11. Choose your encryption out to the right (WPA2-AES is most common).
12. Click Save
13. The Save As box will come up, the file should already be named network do not rename or
change the file.
14. Save the file onto the USB stick.
15. Remove the stick from the computer.
16. Take the stick out to the Wonderbox but do not plug it in yet.
17. Press 99999 (9 5 Times) and hit enter
18. Scroll to System and press enter
19. Scroll to Extended and press enter
GO WITH THE FLOW.
www.tecalemitusa.com I support@tecalemitusa.com Tel +1-281-446-7300 I Fax 281-619-5613
20. Scroll to Interface and press enter. (If you do not see the menu interface remove the
faceplate on the wonderbox and power down the unit, move the dip switch 1 up and then
power the unit back on, scroll to interface and hit enter, make sure it reads WLAN, if it does not
then scroll to the right until it does and hit enter, hit exit a few times and the wonderbox will
tell you to move dip switch 1 back down, you do not need to power cycle the Wonderbox again
it will boot back up. Now you can go into the menu and you will see the menu interface)
21. Scroll down to Read/Config and hit enter.
22. The Wonderbox should prompt you to plug in the USB.
23. Plug in the USB stick and wait for the Wonderbox to say remove the USB.
24. Remove the stick and hit exit 2 times.
25. The Wonderbox should go through the process of connecting to the Wifi and give you a
signal and quality.
26. Once the Wonderbox returns to the Menu Interface continue to hit exit until you are out of
all the menus.
27. Return to the computer.
28. Close out of your HD Manager completely and then open it back up
29. Go to Masterdata tab
30. HDA in the green bar
31. Click the fuel terminal tab.
32. You should now see a terminal populate in the field on the bottom.
33. You can now communicate with the Wonderbox using the HD Manager.
Inhaltsverzeichnis
Andere TECALEMIT Controller Handbücher
