Technaxx Aqua TX-42 Bedienungsanleitung

Technaxx

Fitness Wristband Aqua TX–42

User Manual

The Declaration of Conformity is under the Internet link: www.technaxx.de/ (in bottom bar

“Konformitätserklärung”); Before using the device, read the user manual carefully.

Wristband to monitor your fitness, your sleep and your active phases

Features

Waterproof according to protection class IP67

Especially suitable for joggers and other outdoor activities

Displays real activity step, distance covered and calories burned

Clock & date display, vibrating alarm clock function

Anti-loss function

Connection via Bluetooth 4.0, controllable via APP

Free iOS and Android APP

Track your sleep rhythm and wake up silently with a vibrating alarm

Instant access to up-to-the-minute status via the LED display

Motivates to achieve desired goals and reminds to be active (Resistant to scratches,

abrasion and bumps)

Energy consumption and sleep data measurable and synchronisable

Compete and share your success with friends via Facebook & Twitter

Ideal for making friends with sports companions

FACEBOOK & TWITTER CONNECTION: Press the icon and you see the symbol

at the right corner of your mobile device. Press this symbol. Select either Facebook or

Twitter (see picture), then you can share or publish your activities with your friends via

Facebook or Twitter. When you are already logged in Facebook or Twitter, you see at the

right hand side of your mobile device the picture of “My Fitness

Activity”. Now you can edit a text and then select, share or publish.

ATTENTION: Before using Facebook or Twitter with "My Fitness",

you must login to a Facebook or Twitter account. How to use

Facebook or Twitter, read the manual from each carrier and follow

the instructions.

1. Power management and Charging

Charge the wristband before first use.

1.1. To switch the wristband ON, press and hold the button for 5 seconds until the wristband

will show the icon . In any mode, press and hold the button for 5 seconds, the

wristband will show and shut down. To switch the wristband back to ON, press

and hold the button for 5 sec. again and the wristband will show and starts up

again.

1.2. The wristband has a built-in (cannot be disassemble) battery for power supply. Charge

the wristband before first use, then synchronize it with your mobile device. While

charging, the screen of the wristband will indicate a charging symbol. The button of the

wristband will not respond during charging.

NOTE: The wristband need at least 3 hours to be fully charged. 3 hours charging time will

last approx. 5 – 6 days of use.

2. APP Installation

1) Apple iPhone (iOS version 7.0 or above),

download Technaxx “My Fitness” Sport software at

APP store, then install it on your smart phone.

2) Android phone, download Technaxx “My Fitness”

Sport software in Google Play, then install it on your

smart phone. If the download fails please try again

and re-install.

When installation is completed, you see the picture

MY FITNESS and after the picture in the right and

choose your device. Customize all requirements in

“My Profile”, “Workout Goal” and “Smart Alarm”.

Then start to synchronize your wristband.

3. Customise your wristband – 3.1. Start with “My Profile”

Click on to “Setting” and put in your information. First, under “My Profile”, it is important

to record accurate information to ensure that the reading and outcome will be more

beneficial to the user. Here you can add informations such as your name, your size and

your weight.

3.2. Workout Goal – Set your daily workout goals

Click “Workout Goal” to set your daily sport goals.

Choose the daily goal listed in the options and click

“Save” and Sync.

3.3. Smart Alarm

IMPORTANT NOTICE: After you change any setting like Smart Alarm, Working Goal, etc.

you need to SYNC the wristband again to save all settings. Only after you SYNC, all new

settings will be saved in your APP “My Fitness” and on the wristband.

Alarm Clock: here it must be on “ON” when reminder for Exercise is needed, otherwise put

it on “OFF”. Alarm Time: when Alarm Clock is in “ON” position you must also set the Alarm

Time when you want to remember. Monitoring Period: this is the Alarm monitoring time. It

can be set between 1 – 60 minutes. Alarm Clock, Alarm Time and Monitoring Period

can also be set for the specific day and time.

4. Reminder Setting

Click on “Smart Alarm” to enter alarm setting interface.

After alarm setting, the wristband will remind you silently

(it vibrates) to make some exercise.

The Monitoring Period is the time period, the wristband

is still vibrating to remind you to be active. You can

adjust the time period between 1 – 60 minutes, to let the

wristband vibrate continuously.

Click on “Reminder” to set the multiple activity

reminders. The bracelet will remind you by vibration to

do your exercises.

This function can be turned ON or OFF.

Start time and End time is adjustable from 00 to 24

hours.

Interval is adjustable from 1 to 60 minutes.

This settings can be fixed for each day.

5. SYNC

NOTE: The wristband must be synchronized with the APP every three days to avoid

data loss on the wristband.

There are two ways to synchronize the data on the wristband with your mobile device. You

synchronize either via Bluetooth or by the 3.5mm jack of your mobile device. NOTE: the

3.5mm jack synchronization only works with Android devices!

Starting the wristband: hold the button on top of the wristband for 5 seconds to switch it

on. If synchronizing via Bluetooth make sure, the Bluetooth connection of your mobile

device has been enabled.

GENERAL INFORMATION: For each setting the wristband has to be connected via

Bluetooth with your mobile device.

5.1. Sync via Bluetooth

5.1.1. Press 1x the button of the wristband to illuminate the display. Now there are three

options:

(a) You are directly on the BT-level; either directly in the BT-mode or you

can see the 3.5mm Jack cable icon (in this case press 1x the button to go

to the BT-icon).

(b) You are NOT directly on the BT-level; you can see the bed icon press 2x

quickly the button then you are on the BT-level press the button, until you see the

BT-icon.

the feet press 2x quickly the button and directly press the button again 2x quickly 

then you are on the BT-level press the button, until you see the BT-icon.

5.1.2. Directly after that, tab on the APP icon SYNC to pair the wristband wirelessly.

Then “Bluetooth connecting……” will be displayed on the APP. The APP will scan for

approx. 15 seconds. The wireless connection is successful, if “Synchronization

completed” appears on your mobile device.

If the synchronization is successfully done, you see on the display of your mobile device in

the APP “My Fitness” that the Key icon is locked . That means your Bluetooth

connection to your wristband is saved. For any other change in the settings of My Fitness

APP you can synchronize even if the Key icon is locked.

Attention: In case a NEW version of MY FITNESS is available, you MUST (!) uninstall the

old version first, before you install the new version on your mobile device!

To save power consumption, the Bluetooth connection between the wristband and

the mobile device will turn off automatically after each synchronization.

ATTENTION: If the Bluetooth connection was not successfully with your mobile

device, you must use the 3.5mm jack cable to synchronize! Simply connect it with

the 3.5mm Earphone jack of your mobile device and the other end with your

wristband. Then synchronize again.

5.2. Sync via 3.5mm jack (only for Android version, not for iOS version)

(a) Tab the button shortly two times continuously to enter into SYNC selection mode.

Choose 3.5mm SYNC. .

(b) Insert the supplied 3.5mm plug into the earphone jack of your phone. The APP will

indicate “Audio jack is connected, begin to sync” and “sync finished”. Do not withdraw the

3.5mm plug while synchronizing.

ATTENTION: When, after several tries of synchronization, the key icon still is

unlocked, you have to repeat the steps 5.1 or 5.2 !

6. Anti-loss function

6.1 Switch the wristband to the Bluetooth mode.

6.2. In the APP tap on the icon for “Anti-loss mode”.

6.3. The word “SEARCH” shortly is been displayed; after 10–15 seconds you are

connected to the “Anit-loss mode”.

In case you forget to take you mobile device (e.g. your Smartphone) with you and you are

going away, in a distance of approx. 5m the Bluetooth connection between your mobile

device and your wristband is decreasing; in a distance of approx. 20m your wristband give

a vibrating alarm; this indicates that you do NOT have your mobile device with you.

The “Anti-loss mode” only gives you a vibrating alarm which indicates the LOSS of your

mobile device, it does not tell you, where you lost it.

6.4. In the APP tap on the icon “Back” to leave the “Anti-loss mode” the wristband is

vibrating shortly.

7. Track your Activity & Sleep

The wristband has three main modes. Shortly press the ON/OFF button two times

continuously to change between the three modes.

7.1. Sync mode: Synchronize via Bluetooth. The bracelet must be turned on. Is it on, you

see on the display of the bracelet.

7.2. Sport mode: This is an Activity mode. When you want to make some

exercise then you must select this mode. It can change from sleep to activity mode

automatically when you are awake for more than 5 minutes.

7.3. Sleep mode: When you want to go to bed then you must select this

mode.

a) When in activity mode, press the button two times shortly to enter sleep mode

. The wristband will vibrate and show sleep mode symbol.

b) When in sleep mode, press the button shortly to review the current time of day.

c) When waking up in the morning, the wristband will get automatically into Activity mode

while doing certain amount of exercise.

d) Synchronize your wristband to review your sleep quality of last night; you can also review

previous sleep quality (per one day / one week / one month / one year).

In Activity mode: press 1x the button 5 kinds of data:

Time Step

Distance Calories

Goal

After synchronizing your data, you can review your daily activity situation; you can also

review history (per one day / one week / one month / one year).

Technical specifications

Bluetooth version 4.0 Your Hardware version must support BT 4.0

Display 1.10" LED display (2.8cm)

Battery Built-in rechargeable lithium 45mAh battery

(charge via USB port)

Charging time / Stand-by ~ 2 hours / stand-by time ~ 120 hours

Weight / Dimensions 29 g / (L) 27.8 x (W) 1.8 x (H) 1.0 cm

Package Contents Fitness Wristband Aqua TX-42, USB charging cable

with 4 pin connector, User Manual

Apple iOS Devices: iPhone 4S / 5 / 5S / 5C, iPod touch 5,

iPad 4, iPad mini / iPad mini with retina display / iPad Air

(Apple iPhone iOS version 7.0 or above)

Android Devices: Samsung S3 / S4 / S5 / Galaxy Note 2 / Galaxy Note 3

(Android version 4.3 or above; approve which Android version your Smartphone is using )

Hints for Environment Protection: Packages materials are raw materials and can be

recycled. Do not disposal old devices or batteries into the domestic waste. Cleaning:

Protect the device from contamination and pollution (use a clean drapery). Avoid using

rough, coarse-grained materials/solvents/other aggressive cleaner. Wipe the cleaned device.

Important Notice: Should battery fluid leak from a battery, wipe the battery-case with a soft

cloth dry. Distributor: Technaxx Deutschland GmbH & Co.KG, Kruppstr. 105, 60388

Frankfurt a.M., Germany

Technaxx

Fitness-Armband Aqua TX–42

Bedienungsanleitung

Die Konformitätserklärung ist unter dem Internet-Link: www.technaxx.de/

(in Leiste unten “Konformitätserklärung”); Vor Nutzung, Bedienungsanleitung sorgfältig durchlesen.

Armband zur Überwachung Ihrer Fitness, Ihres Schlafes und Ihrer

Aktivphasen

Besonderheiten

Wasserfest gemäß Schutzklasse IP67

Besonders gut geeignet für Jogger und andere Outdoor-Aktivitäten

Anzeige von Schritten, zurückgelegter Distanz und verbrauchter Kalorien

Uhr- & Datumsanzeige, Weckerfunktion mit Vibrationsalarm

Bluetooth 4.0 Verbindung, steuerbar via APP

Freie iOS und Android APP

Schlafrhythmus verfolgen und entspannt durch einen Vibrationsalarm aufwachen

Sofortiger Zugriff auf eine minutengenaue Statistik über die LED Anzeige

Motiviert, gewünschte Ziele zu erreichen und erinnert daran, aktiv zu sein (unempfindlich

gegen Kratzer, Abrieb und Stöße)

Energieverbrauch und Schlafdaten messbar und synchronisierbar

Vergleichen und teilen der Erfolge mit Freunden auf Facebook & Twitter

Ideal, um Freundschaften zwischen Sportkollegen zu schließen

FACEBOOK & TWITTER VERBINDUNG: Auf den Icon tippen, dann sehen Sie in der

rechten Ecke Ihres mobilen Gerätes das Symbol . Auf dieses Symbol tippen. Entweder

Facebook oder Twitter auswählen (siehe Bild), dann können Sie Ihre Aktivitäten mit Ihren

Freunden über Facebook oder Twitter teilen oder posten. Wenn Sie schon in Facebook

oder Twitter eingeloggt sind, sehen Sie auf der rechten Seite Ihres

mobilen Gerätes das Bild von “My Fitness Aktivitäten”. Nun können

Sie einen Text hinzufügen und dann auswählen, teilen oder posten.

ACHTUNG: Bevor Sie Facebook oder Twitter mit „My

Fitness“ nutzen, müssen Sie in ein Facebook oder Twitter Konto

einloggen. Wie Facebook oder Twitter benutzt werden, lesen Sie im

Handbuch des Anbieters nach und befolgen Sie die Anweisungen.

1. Stromspar- und Ladefunktion

Laden Sie das Armband vor der ersten Benutzung auf.

1.1. Das Armband einschalten, indem die Taste 5 Sekunden lang gedrückt wird, bis das

Symbol angezeigt wird. Das Armband zeigt in jedem Modus an und

schaltet ab, sobald die Taste 5 Sekunden lang gedrückt wird. Das Armband wieder

einschalten, indem erneut die Taste 5 Sekunden lang gedrückt wird, bis das Symbol

angezeigt wird und das Armband sich wieder einschaltet.

1.2. Das Armband verfügt über einen eingebauten (nicht entnehmbaren) Akku. Laden Sie

das Armband vor der ersten Benutzung auf. Synchronisieren Sie es dann mit Ihrem

mobilem Gerät. Während des Ladevorgangs erscheint ein Ladesymbol auf dem Bildschirm.

Die Armband-Taste reagiert während des Ladevorgangs nicht.

HINWEIS: Der Ladevorgang dauert mindestens 3 Stunden. Mit einer Ladezeit von 3

Stunden ist das Gerät ca. 5 - 6 Tage betriebsbereit.

2. Installation der APP

1) Apple iPhone (iOS Version 7.0 oder höher),

Technaxx “My Fitness” Sport-Software im

APP-Store herunterladen und anschließend auf

dem Smartphone installieren.

2) Android-Handy, Technaxx “My Fitness”

Sport-Software im Google Play-Store

herunterladen und anschließend auf dem

Smartphone installieren.

Schlägt der Download fehl, den Vorgang

wiederholen und erneut installieren.

Nach Abschluss der Installation erscheint das Bild

MY FITNESS und nach dem Bild rechts und

wählen Sie Ihr Produkt. Anpassung aller

Einstellungen in “Mein Profil” (My Profil),

“Trainingsziele“ (Workout Goal) und

“Alarmsignal” (Smart Alarm)

Dann die

Synchronisation mit Ihrem Armband starten.

Inhaltsverzeichnis

Sprachen:

Andere Technaxx Herzfrequenzmonitor Handbücher

Technaxx

Technaxx TX-72 Bedienungsanleitung

Beliebte Herzfrequenzmonitor Handbücher anderer Marken

Sportline

Sportline SOLO 915 Bedienungsanleitung

Sportline

Sportline Solo 920 Bedienungsanleitung

Crane

Crane D02J56 Bedienungsanleitung

Mio

Mio ALPHA Bedienungsanleitung

O-Synce

O-Synce MIXfree Bedienungsanleitung

New Balance

New Balance NX 710 CardioTRNR Bedienungsanleitung

Sportline

Sportline 905 Bedienungsanleitung

Oregon Scientific

Oregon Scientific SE188 Bedienungsanleitung

Acumen

Acumen BASIX Bedienungsanleitung

Tanita

Tanita AM-160 Bedienungsanleitung

Mocacare

Mocacare MOCAheart Bedienungsanleitung

Datel

Datel Go-tcha Evolve for Pokémon Go Bedienungsanleitung

ItsImagical

ItsImagical PRO SPORT SMART BAND Bedienungsanleitung

Polar Electro

Polar Electro RCX5 Bedienungsanleitung

NAV

NAV Master II Bedienungsanleitung

Oregon Scientific

Oregon Scientific SH201 Bedienungsanleitung

JUNSD

JUNSD JS-702 Bedienungsanleitung

Polar Electro

Polar Electro E40 Bedienungsanleitung