Techni-Lux Bank Light 4 Bedienungsanleitung

TH-BANK4

INSTRUCTION MANUAL

I. Technical Specifications:

Item Code: TH-BANK4

Product Description: Bank Light 4 (also known as stage blinder)

Voltage: AC 120V or 230V, 50-60HZ,

Voltage dependant on how lamps are wired.

Bulb/Lamp: DWE 120V/max 650W(4X) Screw Terminal

Weight: 6.42 kgs / 14.08 lbs

Size: 17.75"W x 20.5"H x 4"D

Wiring: Requires internal wiring customization of lamps for voltage

II. Operational & Installation Instructions:

1. Unpack the carton to check if there is damage or missing parts when you receive the unit, call the local dealer if

anything is not in normal condition.

2. The unit is supplied with two input PG11 cable glands. Internal and external wiring must be completed prior to using

this fixture. Depending on your desired input voltage and lamp fixture pattern output, you must wire the lamps in series or

parallel using 120v lamps. By putting two lamp in series, that circuit may operate at an input voltage of 240v. Use

appropriate wiring to handle the current and heat necessary for proper operation. Multiple plug inputs are provided because

at 120v, a normal circuit could not provide enough current to feed all the 650w lamps. Refer to a qualified electrician for

advise or contact your dealer for assistance in wiring.

3. Open each lamp cover to install lamp. Keep lamp clean while installing and tighten screw terminals. Never install

lamps with power connected. Disconnect power before re-lamping and make sure lamps are cool before touching.

4. Place the unit where there is efficient ventilation, away from any flammable and explosive materials.

5. Check that the rated power corresponds to the main supply.

III. Re-lamping:

1. Disconnect from power supply and let cool down before re-lamping.

2. Remove each safety lamp holding ring and replace burned out lamp.

3. Restore the lamp holding safety ring cap.

IV. CAUTION: Carefully read and observe for proper and safe use.

1. Ambient temperature should not exceed 40℃.

2. Disconnect from the power supply before opening or replacement of any lamp. Please be sure the lamp is cool before

replacement!

3. To avoid electrical shock, do not touch any live parts when the unit is activated.

4. Call professionals for maintenance, no spare parts are included with the unit.

5. Give the unit a break after 15 minutes of continuous use.

6. Replace bulbs and protector with those that meet proper specifications.

7. The lamp shall be changed if it has become damaged or thermally deformed.

8. Please be sure to mount fixtures only as shown on the picture below, hanging on the bracket as shown. Use proper

clamping device to attach to pipe or truss. Safety cables are always suggested.

9. No open flame sources, such as lighted candles, should be placed on or in the fixture.

10. The fixture is intended for indoor use only. Do not expose to water or any type of fluid substances. For dry use only.

11. Never leave this unit on for more than 15 minutes continuously. Unit does not have power switches, it must be turned

on and off from a dimming system or from external circuit switches.

V. Drawing reference for clamp installation: (clamps and safety cables sold separately)

For more information visit: www.techni-lux.com

Clamp eg. Steel “C” or “S”

Screw M8x20mm

Steel wireФ3mm or equipment chain

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Techni-Lux DJ-Equipment Handbücher

Techni-Lux

Techni-Lux DL-LEDPAR1C36O/B Bedienungsanleitung

Techni-Lux

Techni-Lux IL-TRACKER575W/1 Bedienungsanleitung

Techni-Lux

Techni-Lux FlexiLED Series Bedienungsanleitung

Techni-Lux

Techni-Lux VectorLED Series DM-VECTORLED712QB Bedienungsanleitung

Techni-Lux

Techni-Lux DL-LEDPANEL36C/B Bedienungsanleitung

Techni-Lux

Techni-Lux VectorLED 160 Spot Bedienungsanleitung

Techni-Lux

Techni-Lux DL-PANEL1-192U Bedienungsanleitung

Techni-Lux

Techni-Lux UltraLUX Series Bedienungsanleitung

Techni-Lux

Techni-Lux ST-LEDSTROBE330 Bedienungsanleitung

Techni-Lux

Techni-Lux DL-FLEXILED1C30/B Bedienungsanleitung

Techni-Lux

Techni-Lux DL-BAR10C252 Bedienungsanleitung

Techni-Lux

Techni-Lux DL-PAR64TC18/B Bedienungsanleitung

Techni-Lux

Techni-Lux DL-BAR10TC24O/B Bedienungsanleitung

Techni-Lux

Techni-Lux Pro Series Tracker SPOT250 Bedienungsanleitung

Techni-Lux

Techni-Lux DL-BAR10C5MM Bedienungsanleitung

Techni-Lux

Techni-Lux DL-BAR10UV365 Bedienungsanleitung

Techni-Lux

Techni-Lux DL-FLEXILED3C30/B Bedienungsanleitung

Techni-Lux

Techni-Lux DL-QUADBAR430TC Bedienungsanleitung

Techni-Lux

Techni-Lux LEDifice Series Bedienungsanleitung

Techni-Lux

Techni-Lux DL-LEDIF150TCO Bedienungsanleitung

Techni-Lux

Techni-Lux DL-OBAR830TC Bedienungsanleitung

Techni-Lux

Techni-Lux ST-LEDSTROBE60 Bedienungsanleitung

Techni-Lux

Techni-Lux DL-ULTRALUX18VW Bedienungsanleitung

Techni-Lux

Techni-Lux CT-OPERATOR Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Zumtobel

Zumtobel APHRODITE Home Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung